Canon GP215 Service Manual page 255

Item
RSIDE- Use it to make adjustments if images on
SENSHP paper picked up from the lower feeding
assembly (2nd side of overlay/two-sided
copies) are often displaced to the rear or
front.
• If the displacement is to the rear,
decrease the value (in units of 23, a sin-
gle unit being equivalent to 1 mm).
• If the displacement is to the front,
increase the value (in units of 23, a single
unit being equivalent to 1 mm).
PVE-OFST Use it to correct offset from the laser center.
• If you have initialized the RAM or
replaced the image processor PCB, enter
the value recorded on the service label.
COPYRIGHT © 1996 CANON INC.
Description
CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
3. OPERATIONS AND TIMING
Settings
0~65535
Within ±46 (23x2)
of the factory
adjustment value.
–200~+200
Remarks
3–201