Canon GP215 Service Manual page 357

4) Remove the cable guide w and the hook
assembly e by disengaging them.
2 3
3
Figure 4-513
5) Remove the cable r and five screws t, and
disconnect the connector y; then, remove the
laser scanner unit u.
5
6
5
Figure 4-514
COPYRIGHT © 1996 CANON INC.
1
4
7 5
5
CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
4. MECHANICAL SYSTEM
3. Removing the BD PCB
1) Remove the laser scanner unit.
2) Remove the two M2 screws, and remove the
BD PCB q.
Figure 4-515
4. Laser Driver Unit
1) Remove the laser scanner unit.
2) Remove the two M3 screws w, and remove
the laser driver unit q.
2
Figure 4-516
1
1
4–31