Canon GP215 Service Manual page 27

2. Operations Available during
Copying
q Stopping Copying
To stop continuous copying, press the Stop
key or the Reset key
will stop after completing the ongoing copying
run.
w Switching from AE Mode to Manual density
Control Mode
You may switch from AE (auto density control)
mode to manual density adjustment mode
during continuous copying.
However, you cannot switch from manual den-
sity adjustment mode during continuous copy-
ing.
e Interrupting On-Going Copying
To make copies of a different original, press
the Interrupt key to stop the on-going copying.
Note:
The following keys are effective during con-
tinuous copying:
a. Stop key
b. Reset key
c. Interrupt key
d. Copy Density key (from AE to manual)
COPYRIGHT © 1996 CANON INC.
. Copying
CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
1. GENERAL DESCRIPTION
3. Interrupting On-Going Copying
If you want to make copies of a different origi-
nal while making a large number of copies in con-
tinuous copying mode, you can suspend the on-
going copying operation temporarily.
Or, you can suspend fax reception or printer
operation to make copies. (Fax reception or print-
er operation will resume as soon as you end inter-
rupt mode.)
1) Press the Interrupt key to select interrupt
mode.
Available Operations
• Making one-sided copies
• Making 1 to 100 copies
• Selecting non-sort mode
• Selecting manual feed mode
• Selecting a density (darker, lighter, AE)
• Selecting a reproduction ratio (may be
auto)
• Selecting a cassette
• De-selecting ID mode
• De-selecting interrupt mode
You cannot use the document feeder for inter-
rupt mode.
2) Place the original, and press the Start key.
3) To end interrupt mode, press the Interrupt
mode once again.
1–17