Canon GP215 Service Manual page 92

3. OPERATIONS AND TIMING
c. Reduced Image Composition
Reduced image composition mode may be
any of the following two:
q 2-on-1 mode, in which two originals are
reduced for copying on a single sheet of copy
paper.
w 4-on-1 mode, in which four originals are
reduced for copying on a single sheet of copy
paper.
Executing these modes requires control under
combination of reproduction ratio processing, shift
processing, and overlay processing.
In reproduction ratio processing, a reproduc-
tion ratio is computed based on the size of the
original and the size of the copy.
• Formula for Lengthwise Direction
a: copy paper length ÷ (original length × 2)
b: copy paper length ÷ original length
• Formula for Breadthwise Direction
c: copy paper width ÷ (original width × 2)
d: copy paper width ÷ original width
Mode
2-on-1 (overlay)
2-on-1 (continuous) Not Required
2-on-1 (two-sided)
4-on-1
3–38
COPYRIGHT © 1996 CANON INC.
Duplexing unit RDF
Required Not Required
Required
Required Required
Not Required Not Required
Table 3-303
If the reproduction ratio in lengthwise direction
and that in breadthwise direction are different, the
smaller of the two will be selected; however, the
reproduction ratio will be between 25% and
800%.
Shift processing and overlay processing are
controlled as explained in the next page. See
Table 3-303 to find out what modes are available
in relation to different combinations of the RDF
and the duplexing unit.
Lengthwise ratio
b
a
a
a
CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
Breadthwise ratio
c
d
d
c