Relocating The Machine; Points To Note - Canon GP215 Service Manual

5. INSTALLATION
III. RELOCATING THE MACHINE
Perform the following work when the machine must be relocated after installation by truck or other
means of transportation:

1. Points to Note

If you have to move the copier placed on its pedestal from room to room, do not lift the copier with your
hands in the grips; such will separate the copier from its pedestal. Be sure to hold the pedestal when lift-
ing the machines.
2. Before Relocating the Machine
Step
1 Remove the drum unit.
2 Fix the scanner in place.
3 Tape the charging assemblies
and the feeding assembly releas-
ing lever in place to prevent dis-
placement by vibration.
4 Tape the front door and the deliv-
ery assembly in place.
5 Place a single sheet of A3 copy
paper on the copyboard glass,
and tape the copyboard cover
(feeder) in place.
3. Lifting the Copier Off the Pedestal
Step
1 Open the pedestal's right corner,
and release the guide (shift to the
right) used to join the pedestal
and the copier.
2 Hold the copier's grips, and lift
the copier upright so that the
pedestal's pin will slide off the
holes. (Work in a group of two.)
3 Lower the copier on the floor or
on a desk.
5–30
COPYRIGHT © 1996 CANON INC.
Work
Put the drum unit in a separate box for
transport.
Work
Checks
Checks
CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
Remarks
Remarks