Canon GP215 Service Manual page 373

No.
6 Open the front door.
7 Shift the feeding assembly
releasing lever to release the
feeding assembly.
8 Turn the developing assembly
locking lever in the direction of
the arrow shown in the figure.
9 Remove the screws shown in the
figure.
• Keep the removed screws for
installation of the drum unit.
10 Pull the dummy drum straight out
to the front to remove.
• Dispose of the dummy drum.
COPYRIGHT © 1996 CANON INC.
Work
CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
Remarks
Developing assembly locking lever
Feeding assembly releasing lever
Dummy drum Screw
5. INSTALLATION
5–5