Canon GP215 Service Manual page 310

3. OPERATIONS AND TIMING
No.
Name
Tester probe
Service mode
Make checks; nor-
mal if as indicated.
Display reading
Tester reading
No.
Name
Tester probe
Service mode
Make checks; nor-
mal if as indicated.
Display reading
Tester reading
3–256
COPYRIGHT © 1996 CANON INC.
PS11
Pre re-pick up paper
sensor (PDP5)
J103-2
DC PC0-bit0
Move the sensor flag
of PS11 during
standby.
The sen- The sen-
sor flag is sor flag is
down (the up (the
light- light-
blocking blocking
plate is plate is
present). absent).
1 0
about 5 V about 0 V
PS14
Horizontal paper
sensor (CRGPD)
J114-B2
DC PC0-bit6
Open the right door,
and insert copy
paper into the re-
pick up paper path
during standby;
then, inside the copy
paper toward the
rear.
Before When the
sliding copy
the copy paper is
paper slid
toward toward
the rear. the rear.
1 0
about 5 V about 0 V
CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
PS12
Duplexing unit inlet
paper sensor
(PDP6)
J105-B2
DC PC0-bit1
Move the sensor
flag of PS12 during
standby.
the sen- The sen-
sor flag is sor flag is
down up (the
(the light- light-
blocking blocking
plate is plate is
present). absent).
1 0
about 5 V about 0 V
PS13
Delivery sensor
(PDP7)
J105-A2
DC PC0-bit2
Move the sensor flag
of PS13 during
standby.
The sen- The sen-
sor flag is sor flag is
down (the up (the
light- light-block-
blocking ing plate
plate is is absent).
present).
1 0
about 5 V about 0 V