Canon GP215 Service Manual page 389

4. Adjusting the Transmission Level (for model FAX function only)
No.
1 Start FAX service mode.
2 Press '#2. MENU' on the Menu screen, and
press the OK key.
3 Press 'ATT (P)' on the screen to open the
Value Input screen.
Press the appropriate item to highlight, and
enter the appropriate value using the key-
pad; then, press the OK key.
4 • To continue on to adjust NL, go to step 3
of NL adjustment.
• To not continue on to adjust NL, press
the Cancel key, and press the Reset key
twice to end service mode.
COPYRIGHT © 1996 CANON INC.
Work
CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
Remarks
Starting FAX Service Mode
1) Check to make sure that the handle of
the separation static
eliminator cleaning brush is inserted into
the fixing assembly releasing assembly.
In addition, make sure that the door
switch actuator is inserted into the door
switch assembly.
2) Push the service switch with a hex key.
3) Press the * key twice.
• The Service Mode Menu screen will
appear.
4) Press '*8* FAX' on the screen, and press
the OK key.
• The Menu screen will appear.
5. INSTALLATION
5–21