Canon GP215 Service Manual page 337

4. Setting the Mirror Positioning Tool
Use the mirror positioning tool FY9-3009-040 by changing its pin arrangement for the machine.
Refer to the figures for the correct order; q, w, and e indicate the positions of the pins and A, B,
and C indicate the pins.
B
A
Figure 4-306 (FY9-3009-040)
1) Relocate the pins of the mirror positioning tool so that it may be used for the machine.
Note:
The pin A of the mirror positioning tool (FY9-3009-040) will not be used for the machine.
COPYRIGHT © 1996 CANON INC.
C
3
2
1
1
2
3
<Rear> <Front>
Figure 4-308
CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
4. MECHANICAL SYSTEM
C
Figure 4-307
(arranged for the front of the machine)
B
3
2
1
Attach the
longest pin
to
1
Attach the
shortest pin
to
3
4–11