Canon GP215 Service Manual page 159

2. Sequence of Operations (overlay copying)
Copy paper is discharged of sent to the lower feeding assembly by switching the feeding path by the
paper deflecting plate 1.
The feeding patch is witched by turning ON and OFF the paper deflecting plate 1 solenoid 1 (SL5). The
paper deflecting solenoid 1 (SL5) turns ON a specific period of time after copy paper has moved past the
fixing rear paper sensor (PS7). See Figure 3-628-2 for the sequence of operations used for overlay copy-
ing and Table 3-609 for the relationship between electrical parts and the DC controller PCB.
Fixing rear paper
sensor (PS7)
Paper deflecting plate 1
solenoid (SL5)
Lower feeding assembly
inlet sensor (PS12)
Delivery sensor (PS13)
*1 :
Copy paper to the lower feeding assembly.
*2 : Copy paper to the delivery assembly.
Fixing rear paper sensor
Paper deflecting plate 1 solenoid
Lower feeding assembly inlet sensor
Delivery sensor
Jack in the signal line on the DC controller PCB.
COPYRIGHT © 1996 CANON INC.
Pick-up started for 2nd side
SCFW SCRV
Figure 3-628-2
Electrical parts
Table 3-608
CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
LSTR SCFW SCRV
*1 *2
Signal Signal
PS7 PDP3
SL5 DFLD*
PS12 PDP6*
PS13 PDP7*
3. OPERATIONS AND TIMING
LSTR
Jack
J109-6
J105-A5
J105-B2
J105-A2
3–105