Canon GP215 Service Manual page 309

No.
Name
Tester probe
Service mode
Make checks; nor-
mal if as indicated.
Display reading
Tester reading
No.
Name
Tester probe
Service mode
Make checks; nor-
mal if as indicated.
Display reading
Tester reading
COPYRIGHT © 1996 CANON INC.
PS4
Multifeeder paper
sensor (MFPD)
J113-A11
DC PA0-bit2
Place paper on the
paper tray of the
multifeeder during
standby.
Paper is Paper is
not placed.
placed.
1 0
about 5 V about 0 V
PS8
Vertical path paper
sensor (PDP4)
J113-A2
DC PA0-bit9
Move up the sensor
lever of PS8 during
standby.
The lever The lever
is moved is
up. returned.
1 —
about 5 V about 0 V
CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
3. OPERATIONS AND TIMING
PS5
Pre-registration
paper sensor
(PDP1)
J113-A5
DC PA0-bit3
Open the right door
during standby, and
put copy paper over
the pre-registration
paper sensor.
Copy Copy
paper is paper is
not put put over
over the the sen-
sensor. sor.
1 0
about 5 V about 0 V
PS9
Right door
open/closed sensor
(RDOP)
J113-A8
DC PA0-bit10
Open the right door
during standby.
The right The right
door is door is
closed. opened.
1 0
about 5 V about 0 V
PS6
Fixing assembly
delivery paper sen-
sor (PDP3)
J109-6
DC PA0-bit5
Put copy paper over
the delivery paper
sensor during stand-
by.
Copy Copy
paper is paper is
not put put over
over the the sen-
sensor. sor.
1 0
about 5 V about 0 V
PS10
Waste toner sensor
(STDT)
J113-B6
DC PA0-bit11
Move the sensor
lever during standby.
The light- The light-
blocking blocking
plate is plate is
present. absent.
1 0
about 5 V about 0 V
3–255