Canon GP215 Service Manual page 362

4. MECHANICAL SYSTEM
3) Remove the E-ring e, and remove the lever
w at the front.
2
3
Figure 4-709
4) Remove the E-ring y, and remove the lever
t at the rear.
Figure 4-710
5) Remove the two locking springs u.
7
Figure 4-711
4–36
COPYRIGHT © 1996 CANON INC.
6) Remove the separation claw.
7) Remove the lower fixing roller.
Caution:
The lower fixing roller shaft is in contact with
an electrode at the rear of the machine and
has a rear/front orientation. Install it with
care so that it is oriented correctly.
• Install it so that the side with a boss of the
lower fixing roller is toward the rear of the
machine.
Figure 4-712 Rear of the Shaft End
5
6
Figure 4-713 (front of shaft end)
7
CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
Lower fixing roller end
Boss (to remain in contact
with an electrode)
(electrode side)
Fixing lower roller end