Canon GP215 Service Manual page 282

3. OPERATIONS AND TIMING
H. *5* OPTION (settings mode)
• Use this mode to set/change various machine settings (specifications).
• Each press on the
hand, brings up the previous screen.
• Press the desired item (notation on the screen) to highlight.
• Use the keypad to enter numbers.
• A press on the
OK
• When done, be sure to turn off and then on the main power switch.
1. Setting the Copy Count and Shut-Off Slant Mode
Item
COPY-LIM
SHUT_OFF
IM-ANGLE
COIN_OPERT
DRM_MSG
3–228
COPYRIGHT © 1996 CANON INC.
key brings up the next screen; each press on the
key will permanently store the entered value.
*5* OPTION 1
COPY-LIM (100)
SHUT_OFF (OFF : 1) : 0 <- (0)
IM-ANGLE
COIN_OPERT
DRM_MSG
Function
Use it to change the upper
limit imposed on the copy
count.
Use it to enable/disable
the sleep function.
Use it to switch slant
mode.
Coinvender switching
Use this to switch the
"Replace Drum" message.
CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
CANCEL
: 100 <- (000)
: 0 <- (0)
: 0 <- (0)
: 0 <- (0)
+
–
OK
You may change the upper limit imposed on
the copy count between 1 and 100 (copies).
You may disable the auto shift function (time)
to sleep state.
Copies made in slant mode may become
jagged; change the setting of this mode from
'0' to '1' if such a problem is noted.
Select '1' to support a coin vender.
0: Will not indicate the Replace Drum mes-
sage on the control panel.
(default in 230V model)
1: Will indicate the Replace Drum message.
(default in 120V model)
key, on the other
Description