Canon GP215 Service Manual page 203

3. Feeder
a. RDF-G1
Pick-up for the RDF-G1 occurs differently
between copier function and fax transmission.
When making copies, the bottommost original
is picked up from a stack and moved to the origi-
nal tray after copying.
During fax transmission, on the other hand,
the topmost original is picked up from the stack
and moved to the original delivery tray after read-
ing the image.
You can select copier pick-up for fax transmis-
sion under 'FAX_DOC_FEE' in service mode
(*5*). However, the order of the pages generated
by the fax at the other end will be reversed and
the stamping function cannot be used.
• Picking Up Originals for Copying
RDF-G1
4
Scanner (moving)
• Picking Up Originals for Fax Transmission
RDF-G1
1
Scanner (moving)
COPYRIGHT © 1996 CANON INC.
Originals
4
1
2
3
4 (face up)
Originsl tray
Originals
1
2
3
(face up)
4
Original delivery tray
CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
3. OPERATIONS AND TIMING
b. ADF-F1
For ADF-F1, an original is read by stopping the
scanner at a point about 20 mm from home posi-
tion, and the original is read while it is being
moved (stream reading).
You must place the originals face down, and
they will be read starting with the first page.
To collate the sheets of copy paper, they are
turned over for delivery (face-down delivery). You
may enable or disable this face-down delivery in
copy specifications settings mode. (At time of
shipment, ON is selected.)
When making two-sided copies, face-down
delivery will not be executed regardless of the
position of the switch.
Scanner (fixed)
Reversal for face-down delivery
Originals
(face down)
3–149