Cti Calls - Unify OpenStage 15 User Manual

94
Settings
User
if nec.j
Configuration
Incoming calls?

CTI calls?

AutoAnswer = No
Yes
AutoAnswer beep = No
Yes
Save & Exit
CTI calls
Beep on auto-answer
Speakerphone mode automatically activates on your phone if you use a CTI ap-
plication such as Outlook to dial a number when Auto-answer is active. If Auto-
answer is not active, the phone rings first and you have to press the loudspeaker
key or lift the handset to set up the call. This setting also defines whether or not
incoming calls are automatically accepted. If the function is active, an alert beep
sounds when an incoming call is automatically accepted.
Information on the operation of the configured CTI application can be found in
the corresponding user guide.
z
You can also configure this setting via the web interface
Prerequisite: The option was programmed by your administrator.
N
Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
f
Select and confirm the option shown.
f
Select and confirm the option shown.
l
Select and confirm the option shown.
Select and confirm the option shown.
l
Select and confirm the option shown.
l
Enhanced phone functions
Page 197.
