Ending A Consultation Call; Switching To The Held Party (Alternating) - Unify OpenStage 15 User Manual

48
Disconnect & return?
Retrieve held call
Alternate?
Disconnect & return?

Ending a consultation call

You end the consultation
Select and confirm the option shown.
f
The consultation call is disconnected. The call with the first party is resumed.
The second party hangs up
If the second call partner hangs up, you will be prompted to retrieve the first call
again if "Hold and hang-up" is disabled (
remain on hold until you receive this prompt after a defined time interval.
Confirm the option shown. You are reconnected with the first party.
If the call is kept on hold, you can retrieve the call via the context menu
before the set time expires.

Switching to the held party (alternating)

Prerequisite: You are conducting a consultation call.
Select and confirm the option shown.
l
In the first display line, the phone number or name and the duration of the active
connection are displayed.
You can switch back and forth between two subscribers by repeatedly se-
lecting and confirming "Alternate".
Ending an alternate operation
Select and confirm the option shown.
f
The active call is disconnected and the held call is restored.
Basic functions
Page 84). Otherwise, the first call will
