Cti Calls; Beep On Auto-Answer - Unify OpenScape 4000 User Manual

112
User
if nec. j
Configuration
Incoming calls?

CTI calls?

AutoAnswer = No
Yes
AutoAnswer beep = No
Yes
Save & exit
CTI calls

Beep on auto-answer

When you dial a number with a CTI application (e.g. Outlook) and auto-answer
is activated, the phone switches automatically to speakerphone mode. If auto-
answer is deactivated, the phone first rings and you have to press the loud-
speaker key or lift the handset in order to set up the call. This setting also defines
whether or not incoming calls are automatically accepted. If the function is ac-
tive, an alert beep sounds when an incoming call is automatically accepted.
Information on the operation of the configured CTI application can be found in
the corresponding operating instructions.
z
You can also configure this setting via the WEB interface
ñ
The CTI option was programmed by your administrator.
@
Press the key shown.
Select and confirm the option shown.
Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
f
Select and confirm the option shown.
f
Select and confirm the option shown.
l
Select and confirm the option shown.
Select and confirm the option shown.
l
Select and confirm the option shown.
l
Other settings and functions
page 143.
