Logging On With Forced, Delayed Logoff At A Remote- Phone - Unify OpenStage 15 User Manual

146
Mobile logon
Mobility ID
Enter password
Logging on with forced, delayed logoff at a remote-
phone
If the remote phone is busy and your administrator enabled "Forced logoff during
call" with a set timeout, forced logoff does not occur until this timeout expires.
Logon via a key
If a program key is configured for Mobility.
S
Press the "Mobility" program key.
Logon via the context menu
or
Select and confirm the option shown in the idle display context menu
Page 23.

You are prompted to enter your mobility ID.
j
Enter and confirm Mobility ID, usually a telephone number.
You are prompted to enter the password.
j
Enter and confirm the user password.
The following mobility messages appear in the display:
• Logging off elsewhere
At the same time, the display on the busy remote phone shows "Forced
logoff".After the set timeout the active call is ended and remote logoff is
performed.
• Validating
• Registering
• Downloading user data
Once logon is complete, the "Mobility" program key LED lights up and the mo-
bility icon appears in the display .
Mobility