During Calls; Making And Receiving Calls On A Single Line; Making And Receiving Calls With Multiple Lines - Unify OpenStage 15 User Manual

Making calls with multiple lines

During calls

Making and receiving calls on a single line

If you only use one line on your multi-line telephone to make calls, and you re-
ceive calls on the same line, the phone operates in the same way as a single-
line telephone:
• Redial Page 46

• Consultation
• Alternate

• Callback Page 51

• Hold Page 81

• Call waiting (second call)
• Transferring a call
• Conference
Functions available exclusively for the primary line:
• Call lists Page 27

• Voicemail

• Call forwarding
• Do not disturb
Depending on your individual settings, you will be notified of incoming calls
Page 173.


Making and receiving calls with multiple lines

Accepting a waiting call
Depending on the settings for "Rollover", you will be notified of incoming
calls Page 134.

Prerequisite: You are conducting a call. At the same time, a call is incoming on
another line.
[
Call on line 1.
T
Press the line key for line 2. The call on line 1 is placed on hold.
All multi-line users that share the line on which the call is being held
( Page 20) can now pick up the held call. To prevent other users from an-

swering the held call, you must place the call on "Consultation" hold
Page 47.

Depending on the setting made by your administrator, you may have to
press the trunk key twice to accept the call on the other line. The first call
is either placed on hold or released depending on the setting.
[
Conduct call on line 2.
\
End call on line 2.
T
Press line key for line 1.
[
Retrieve call on line 1.
Page 47

Page 48
Page 86

Page 91

Page 100

Page 27
Page 54

Page 136

119