One-Way Intercom And Two-Way Intercom Function - Unify OpenStage 15 User Manual

OpenScape Voice functions
One-way Intercom and Two-way Intercom
function
With One-way Intercom or Two-way Intercom, the loudspeaker or speakerphone
function of a destination phone is activated automatically when the connection
is established. Use of these functions is conceivable for example between an
executive and secretary or between a doctor and receptionist.
Possible functions include:
• One-way Intercom
– with variable input of member number
– to a saved member number
• Two-way Intercom
– with variable input of member number
– to a saved member number
Prerequisites:
• The team member belongs to the same collective group as you and has like-
wise been assigned a member number.
• The team member's phone has a loudspeaker (One-way Intercom) and/or a
speakerphone function (Two-way Intercom).
• Automatic answering is activated for the team member.
• The team member's phone is idle.
• The member numbers of the callers are known for the One-way Intercom and
Two-way Intercom functions.
You can cancel One-way Intercom or Two-way Intercom by replacing the hand-
set or – during a consultation – resume the held call.
Two-way Intercom connections can be established from the following states:
• In idle status
• During manual call holding
• In a consultation
Functions such as "call forwarding" or "do-not-disturb" are temporarily dis-
abled on the destination caller's phone by the One-way Intercom and Two-
way Intercom functions.
159