Enhanced phone functions
Deflect
?
089008844
Settings
User
if nec.j
Configuration
Incoming calls
Deflecting?
Allow deflection = No
Yes
Default destination =
Enhanced phone functions
Incoming calls
Deflecting a call
Using call deflection
Prerequisite: An incoming call is displayed or signalled. "Deflect" must be al-
lowed.
m
Select and confirm the option shown.
l
If a destination phone number is stored (
it. The call is deflected.
or
If you did not set a phone number when programming call deflection, you are
now prompted to enter a destination phone number for call deflection.
j
Enter and confirm the destination phone number. The call is deflected.
Permitting call deflection
z
You can also configure this setting via the web interface
must be authorised by administrator.
N
Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
f
Confirm.
l
Select and confirm the option shown.
f
j
Enter and confirm the phone number to which the station should be deflected.
Entering a destination phone number is not mandatory when call deflec-
tion is active. If you want to deflect an incoming call, you are prompted to
enter a destination phone number if there is none stored.
Page 77), you can select and confirm
Page 197. "Deflect"
77