Incoming Calls; Basic Functions; Answering A Call; Open Listening During A Call - Unify OpenStage 5 SIP User Manual

Incoming Calls

u
Loudspeaker
Loudspeaker
Mute
Mute
Incoming Calls

Basic Functions

All the features described in this section are available for both single-line
and multiline telephones.

Answering a Call

The telephone rings.
n
Lift the handset.
v
Set call volume. To raise or lower the volume, press the relevant key until the
or
desired volume is set.

Open Listening During a Call

You can allow other people in the room to join the telephone conversation. In-
form the party at the other end of the line that you are switching to loudspeaker.
Prerequisite: You are conducting a call. The function key "Loudspeaker" is con-
figured, see

Activating the Loudspeaker Function
Press the key. The LED lights up, the loudspeaker is activated.
Deactivating the Loudspeaker Function
Press the key. The LED goes out, the loudspeaker is deactivated.
You can enable or disable an audible warning if the phone is configured for
payload security, but the connection falls back to an unencrypted call. (see
Page 41).


Switching to Mute During a Call

You can consult with other people in the room without the person on the other
end of the line hearing what is said.
Prerequisite:You are conducting a call. The function key "Mute" is configured,
see Page 45.

Activating the Mute Function
Press the Mute key. The LED lights up, the microphone on the handset is deac-
tivated.
Deactivating the Mute Function
Press the Mute key. The LED goes out, the microphone on the handset is reac-
tivated.
Page 39.
13