Dialling A Phone Number From A List; Using Autodial Delay - Unify OpenStage 15 User Manual

Enhanced phone functions
Calls
Dialled
Niels, Bohr 30.05. 07:06am

Dialling a phone number from a list

The following call lists are available in the "Calls" directory:
• Missed
• Dialled
• Received
• Forwarded
For a detailed description of the call lists, see
the notes on
O
Press the key shown.
Select and confirm the option shown.
m
Select and confirm the option shown.
f
Select and confirm the appropriate list entry.
The phone number associated with the list entry is dialled. If you have not al-
ready lifted the handset, conduct the call now in speakerphone mode.

Using autodial delay

A number is automatically dialled after a set delay starting from the entry of the
number's last digit. The autodial delay can be used:
• when dialling in idle mode
• Consultation
• when transferring an answered call.
The delay can be reduced by performing one of the following activities:
=
• Pressing the key =. This always works.
^
• lifting the handset. This only works if the phone number was entered when the
phone was idle or if it was entered for a consultation call when the handset was
off hook.
n
• pressing the loudspeaker key. This only works if the phone number was en-
tered when the phone was idle and the loudspeaker key was not lit or if the
phone number was entered for a consultation call and the loudspeaker key
was not lit.
If an emergency number is preset by your administrator, the autodial delay
for this phone number is reduced to one second.
Automatic dial delay does not work if you are using a dial plan and Imme-
diate dialling is configured (see
dialled as soon as the string entered matches an entry in the dial plan.
Page 112.

Page 45). The number is automatically

Page 27. Pay attention to

97