Automatic Daylight Saving Time; Time Display Format - Unify OpenStage 15 User Manual

Individual phone configuration
Settings
User
if nec.j
Date and time?
Settings
User
if nec.j
Locality?
Time format = 24 hours
12 hours (AM/PM)
Save & Exit

Automatic daylight saving time

The Auto DST setting is provided for information purposes and can only be
changed by your administrator.
z
You can also access this information via the web interface
N
Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
Enter and confirm the user password.
Select and confirm the option shown.
Daylight saving time must be manually set if a No is entered for Auto DST
.
 Page 170

Time display format

z
You can also configure this setting via the web interface
N
Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown. The format set is displayed.
m
Select and confirm the time format (12- or 24-hour display).
f
Select and confirm the option shown.
l
171
Page 197.

Page 197.
