Configuring A Fixed Forwarding Key - Unify OpenStage 15 User Manual

Programmable keys
OK
Normal =
CF unconditional
CF unconditional - any
Setting
Save & Exit

Configuring a fixed forwarding key

S
Hold down the programmable key you want to assign a function to until the pro-
gramming prompt is displayed.
If the prompt is not displayed or a programmed function is not executed,
then you can only launch key programming via the user menu (ask your
administrator about the current setting).
Confirm to begin programming. The key illuminates continuously.
z
You can also configure this setting via the web interface
Select and confirm the option shown to program the first level for instance.
f
Call forwarding depending on the forwarding type
Select a forwarding type:
f
• Forward all calls
• Forward no reply
• Forward busy
Select and confirm the required function.
Call forwarding depending on the call type
If use of server feature has been enabled by administrator and the Ext/int for-
warding function is activated, call forwarding by incoming call type functionality
will be available to you. Forwarding in this case is dependent on the forwarding
type and additionally on the call type.
f
Select a forwarding type:
• CF unconditional - any
• CF unconditional – int.
• CF unconditional – ext.
• CF busy - any
• CF busy – int.
• CF busy – ext.
• CF no reply - any
• CF no reply – int.
• CF no reply – ext.
Select and confirm this option to enter the forwarding destination.
f
j
Enter and confirm the phone number of the forwarding destination.
l
Select and confirm the option shown.
73
Page 197.
