Making Calls With Multiple Lines; Incoming Calls; Accepting Calls For The Primary Line; Accepting Calls For Secondary Lines - Unify OpenStage 15 User Manual

116

Making calls with multiple lines

You can use your OpenStage 20 E as a multi-line phone. If you have any ques-
tions regarding how to configure your OpenStage phone as a multi-line phone,
please contact your administrator.
The following is a description of the telephony scenarios for multi-line phones.
To facilitate comprehension, you should familiarise yourself with the enhanced
telephony application and how to use the line keys beforehand. You can make
further individual settings for your multi-line phone. Refer to the following sec-
tions for a detailed description of the individual components:
• Introduction to multi-line phones
• Lines and line keys

Incoming calls

Depending on your individual settings, you will be notified of incoming calls
Page 174.


Accepting calls for the primary line

In this case, the telephone behaves in the same way as a single-line telephone.
See Page 32 and


Accepting calls for secondary lines

Prerequisite: The secondary line is configured on your multi-line telephone.
Using the handset
^
Lift the handset.
[
Conduct call.
The line used for the ringtone is selected automatically. If there are calls
on several lines, you are connected with the line that has been ringing the
longest.
Making calls with multiple lines
Page 13

Page 20

Page 77.
