Switching From Handset To Speakerphone Mode - Unify OpenStage 15 User Manual

36
n and \
{ or }
Switching from handset to speakerphone
mode
Make note of the two different processes and activate, if necessary, your
preferred setting
Prerequisite: You are conducting a call via the handset and the microphone and
loudspeaker functions have been activated by administrator.
Standard mode
Hold down the key and replace the handset. Then release the key and proceed
with your call.
US mode
If the country setting is set to US, you do not have to hold down the loudspeaker
key when replacing the handset to switch to speakerphone mode.
n
Press the key shown.
\
Replace the handset. Proceed with your call.
A secure voice communication is indicated by a closed padlock icon on the
graphic display; a nonsecure voice communication is indicated by an open
padlock icon on the graphic display (see also
Page 176.

Basic functions
Page 32)
