Placing A Call On Hold - Unify OpenStage 15 User Manual

Enhanced phone functions
Hold ?
Reconnect ?

Placing a call on hold

You can use this function to place an ongoing call on hold, for instance, to pre-
vent the other party overhearing a conversation with a colleague in the same
room.
Prerequisite: You are conducting a call.
Select and confirm the option shown in the connections's context menu.
f
or
S
Press the "Hold" key. The key flashes. (The "Hold" key must be configured
Page 69.)

If you do not retrieve the held call after a defined time interval, a reminder
beep sounds three times and a prompt to retrieve the call or disconnect
appears on the display. The settings for this can be found on
and Page 83.

Retrieving a held call
Select and confirm the option shown in the connections's context menu.
l
or
T
Press the flashing "Hold" key. (The "Hold" key must be configured
Using line keys
On multi-line telephones you can use the line keys to place ongoing calls on
hold.
R
Press the corresponding line key. The line key LED starts flickering. The call is
now on hold.
Retrieving a held call:
T
Press the corresponding line key. The line key LED lights up. The call is re-
trieved.
The LED display
line telephones where this line is also configured. These phones can then
pick up the call.
Page 21 indicates that the call is on hold to other multi-

81
Page 82

Page 69.)
