Programming A Key; Starting Programming - Unify OpenStage 15 User Manual

70
OK
Settings
User
if nec.j
Phone
Program keys

Programming a key

z
You can also configure this setting via the web interface

Starting programming

Directly via the key
S
Hold down the programmable key you want to assign a function to until the pro-
gramming prompt is displayed.
If the prompt is not displayed or a programmed function is not executed,
then you can only launch key programming via the user menu (ask your
administrator about the current setting).
Confirm to begin programming. The key illuminates continuously.
Via the user menu
or
You can also program keys via the user menu.
N
Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
Enter and confirm the User password.
Select and confirm the option shown.
Select and confirm the option shown. You are prompted to press the key you
wish to program.
S
Press the key you want to program until the input field opens. The key illumi-
nates continuously.
Programmable keys
Page 197.
