Deactivating The Ringer Temporarily For Incoming Calls And Reactivating It; Do Not Disturb; Enabling Do Not Disturb Via A Key; Enabling Do Not Disturb Via The Idle Menu - Unify OpenStage 15 User Manual

136
Do not disturb on
Do not disturb off
Deactivating the ringer temporarily for incoming calls
and reactivating it
If you are disturbed on an important call by the phone ringing, for example, you
can deactivate the ringer temporarily and then activate it again.
)
Press the key briefly. The ringer is deactivated.
)
Now press the key again briefly. The ringer is reactivated.

Do not disturb

If "Do not disturb" is activated, your telephone will not ring. The caller hears the
busy tone or an announcement that the called party cannot accept any calls at
the moment.
Do not disturb can be activated and deactivated by means of a specially pro-
grammed key or also from the idle menu.
On multi-line telephones (
disturb" function for your primary line.
Prerequisite: A programmable key is assigned the function "Do Not Disturb"
(see Page 69). "Do not disturb" must be activated (


Enabling do not disturb via a key

S
Press the programmed "DoNotDisturb" key.
R
Press the illuminated key once more to deactivate the "Do not disturb" function.
You can also use the key to activate the "Do not disturb" function during a
call or deactivate it when an incoming call is being signalled.
or

Enabling do not disturb via the idle menu

Select and confirm the option shown in the idle menu. The "Do not disturb" icon
f
appears Page 24.

or.
Select and confirm the option shown. The do not disturb icon is deleted.
f
Page 13) you can only activate the "Do not


Privacy/security
Page 137).