Settings - Unify OpenStage 15 User Manual

174

Settings

User
if nec.j
Audio
Settings?
Room character = Normal
Save & Exit
Settings
User
if nec.j
Audio
Settings?
Ringer file = abc.mid
abc.mid?
Save & Exit
Settings
Room character
To ensure that the other party can hear you properly in speakerphone mode, you
can adjust the phone to the room acoustics by choosing one of the following
room character conditions: "Normal", "Echoing", "Muffled" .
z
You can also configure this setting via the web interface
N
Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select the room type (for example "Normal") and confirm.
f
Select and confirm the option shown.
l
Ringtone
If your administrator has loaded suitable files to the phone, you can select
a realtone file in "*.mid" and "*.wav" format for the ringer tone. If no individual
audio files are available the "pattern" ringtone is preset.
z
You can also configure this setting via the web interface
N
Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
f
Confirm. Select required ringtone file
f
the associated ringer melody. Confirm current ringtone file.
Select and confirm the option shown.
l
1. The phone displays the current setting.
Individual phone configuration
Page 197.

Page 197.

1
[ ]
or "pattern". You will immediately hear