Controlling Call Recording - Unify OpenStage 15 User Manual

190
] or n

Controlling call recording

Starting call recording manually during a call
Prerequisite: Manual mode or AutoStart is selected. You are conducting a call.
Recording has not started. The recording button LED is not lighting.
[
You are conducting a call (see also
S
Press the recording button to start the recording - the LED key lights up.
You hear a beep and the recording symbol
is now being recorded (see also
Pausing call recording manually during a call
Prerequisite: Manual mode or AutoStart is selected. You are conducting a call.
Recording has started. The recording button LED lights up.
[
You are conducting a call (see also
R
Press the recording button to pause the recording - the LED extinguishes and
the recording symbol
You can start the recording again at any time, for example to continue recording
the current call.
Ending call recording automatically
Prerequisite: You are conducting a call. Recording has started. The recording
button LED lights up.
The recording is ended automatically as soon as the call is terminated or if the
call status changes so that the call is no longer being recorded - for example if
a line is placed on manual hold and another line is seized (Multiline).
The LED extinguishes and the recording symbol
Page 187).

|
Page 188)

Page 187).

|
on the display disappears.
Call recording
is shown on the display. The call
|
on the display disappears.