Openscape Voice Functions; Feature Toggle Key; Hunt Group; Whispering - Unify OpenStage 15 User Manual

OpenScape Voice functions

OpenScape Voice functions
The OpenScape Voice supports a number of functions that you can activate and
deactivate from your phone.
On multi-line telephones, the full scope of OpenScape Voice functions is
only available for the primary line.

Feature toggle key

Hunt group

You can pick a programmable key and program it as a feature toggle key for ac-
tivating the "make line busy" and "stop hunt" functions.
You can then use the programmable key to activate or deactivate the relevant
OpenScape Voice function on the server for this phone.
You can only program first-level programmable keys because those linked to
LEDs are used to display the function status as either on (LED on) or off (LED
off). The LED indicates the status of the function on the server and can therefore
change without any of the programmable keys being pressed.
Example:
Switching between "Line busy" and "Line free" (see also
Prerequisite: Your administrator configured a programmable key with the
function "Busy" ("make line busy" for the hunt group).
S
Press the programmable key – the key lights up.
R
Press the illuminated programmable key once again to release the line - the
keys stops illuminating.

Whispering

You can configure a feature toggle key for the "whisper" function
order to communicate unnoticed with the first internal caller when "muted silent
monitoring" is activated
Prerequisite: Your administrator has configured and activated the "whisper"
function in the system.
S
Press the key shown – the key lights up. "Whispering" is activated.
R
Press the illuminated key once again to disable "whispering" - the key stops
illuminating.
Page 158.

147
Page 152).

Page 72 in
