Direct Clutch - Intermediate Roller Clutch Disassembly - Jeep 1979 CJ-5 Technical & Service Manual

AUTOMATIC T1A1SIISSOI 2C-53
Fig. 2C-83
Checking Forward Clutch Operation
Direct Clitcl—Intermediate Roller Glutei
9 0 0 1 4
4 2 5 0 2
Disassembly
F!|. 2C-84
l i f i n e d l i l i Roller Clutch Sup Ring Removal
(1) Remove snap ring attaching intermediate clutch
retainer to direct clutch housing (fig. 2C-84).
(2) Remove retainer, intermediate clutch outer
race, and intermediate roller clutch (fig. 2C-85).
(3) Remove snap ring attaching backing plate to
direct clutch housing (fig. 2C-86).
(4) Remove backing plate, four composition-faced
and four steel clutch plates (fig. 2C-87).
NOTE 6 , Some transmission models use five composi-
tion-faced and five steel clutch plates. Refer to the
Clutch Plate Application Chart at the end of this section
for details.
(5) Using Clutch Spring Compressor Tool J-25149
and arbor press, compress spring retainer and remove
snap ring attaching spring retainer to direct clutch
housing.
(6) Remove spring retainer, release springs, and
piston (fig. 2C-88).
DIRECT C L U T C H
PISTON RELEASE
SPRINGS
DIRECT C L U T C H
SPRING R E T A I N E R
DIRECT
C L U T C H
INNER
SEAL
I N T E R M E D I A T E
R O L L E R
C L U T C H
\
DIRECT
C L U T C H
OUTER
SEAL
DIRECT
C L U T C H
CENTER
SEAL
DIRECT
C L U T C H
HOUSING
A N D
RACE
ASSEMBLY
I N T E R M E D I A T E
C L U T C H
R E T A I N E R
/
SNAP
RING
I N T E R M E D I A T E
CLUTCH
OUTER
RACE
9 0 0 1 5
Fig. 2C-11 Direct Clutch-Intermediate Roller Clatch Sotipnents