Page 1 Compass 2 0 1 5 O W N E R ’ S M A N U A L I n f o r ma t i o n P r o v i d e d b y :...
Page 2 VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name This manual illustrates and describes the operation of Chrysler Group LLC shall be deemed to be deleted and the features and equipment that are either standard or op- name Chrysler Canada Inc.
Page 3: Introduction
TABLE OF CONTENTS SECTION PAGE INTRODUCTION ............. 3 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE .
Page 4 I n f o r ma t i o n P r o v i d e d b y :...
Page 5: Table Of Contents
INTRODUCTION CONTENTS INTRODUCTION ......4 WARNINGS AND CAUTIONS ....7 ROLLOVER WARNING .
Page 6: Introduction
4 INTRODUCTION When it comes to service, remember that your authorized INTRODUCTION dealer knows your vehicle best, has factory-trained techni- Congratulations on selecting your new Chrysler Group cians and genuine parts, and cares about your satisfaction. LLC vehicle. Be assured that it represents precision workmanship, distinctive styling, and high quality - all ROLLOVER WARNING essentials that are traditional to our vehicles.
Page 7: How To Use This Manual
INTRODUCTION 5 injuries by two million annually. In a rollover crash, an unbelted person is significantly more likely to die than a person wearing a seat belt. Always buckle up. HOW TO USE THIS MANUAL Consult the Table of Contents to determine which section contains the information you desire.
Page 8 6 INTRODUCTION I n f o r ma t i o n P r o v i d e d b y :...
Page 9: Warnings And Cautions
INTRODUCTION 7 WARNINGS AND CAUTIONS This Owners Manual contains WARNINGS against op- erating procedures that could result in a collision or bodily injury. It also contains CAUTIONS against proce- dures that could result in damage to your vehicle. If you do not read this entire Owners Manual, you may miss important information.
Page 10: Vehicle Modifications/Alterations
8 INTRODUCTION VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death. Right Front Body VIN Location NOTE: It is illegal to remove or alter the VIN. I n f o r ma t i o n P r o v i d e d b y :...
Page 11: Things To Know Before Starting Your Vehicle
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS A WORD ABOUT YOUR KEYS ... . .12 ▫ Rearming The System ....19 ▫...
Page 12 10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ Sound Horn With Remote Key Lock ..22 POWER WINDOWS — IF EQUIPPED ..35 ▫ Flash Lights With Remote Key Lock/Unlock . . .23 ▫...
Page 13 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 SAFETY TIPS ......98 ▫ Safety Checks You Should Make Inside The Vehicle .
Page 14: A Word About Your Keys
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Ignition Key Removal The authorized dealer that sold you your new vehicle has 1. Place the shift lever in PARK (if equipped with an the key code numbers for your vehicle locks. These automatic transmission).
Page 15 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 NOTE: If you try to remove the key before you place the shift lever in PARK, the key may become trapped tem- porarily in the ignition switch cylinder. If this occurs, place the shift lever in PARK, rotate the key clockwise slightly, then remove the key as described above.
Page 16: Locking Doors With A Key
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Locking Doors With A Key WARNING! (Continued) You can insert the key with either side up. To lock the • Allowing children to be in a vehicle unattended is door, turn the key to the right. To unlock the door, turn dangerous for a number of reasons.
Page 17: Sentry Key
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 During normal operation, after turning on the ignition SENTRY KEY® switch, the Vehicle Security Light will turn on for three The Sentry Key® Immobilizer System prevents unau- seconds for a bulb check. If the light remains on after the thorized vehicle operation by disabling the engine.
Page 18: Replacement Keys
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CAUTION! CAUTION! The Sentry Key® Immobilizer system is not compat- Always remove the Sentry Keys® from the vehicle ible with some aftermarket remote starting systems. and lock all doors when leaving the vehicle unat- Use of these systems may result in vehicle starting tended.
Page 19: Customer Key Programming
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 4. Insert a blank Sentry Key® into the ignition switch. Customer Key Programming Turn the ignition switch to the ON/RUN position If you have two valid Sentry Keys®, you can program within 60 seconds. After 10 seconds, a single chime new Sentry Keys®...
Page 20: General Information
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE starting your vehicle. The remaining keys must then be VEHICLE SECURITY ALARM — IF EQUIPPED reprogrammed. All vehicle keys must be taken to an This Vehicle Security Alarm monitors the doors, liftgate, authorized dealer at the time of service to be repro- and ignition switch for unauthorized operation.
Page 21: Rearming The System
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 3. The Vehicle Security Light in the instrument cluster To Disarm The System will flash rapidly for approximately 16 seconds. This Push UNLOCK on the RKE transmitter, or insert the key shows that the Vehicle Security Alarm is arming. into the ignition switch and turn the ignition switch to During this period, if a door is opened, the ignition the ON/RUN position.
Page 22: Vehicle Security Alarm Manual Override
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Vehicle Security Alarm Manual Override The Vehicle Security Alarm will not arm if you lock the doors using the manual door lock plunger. REMOTE KEYLESS ENTRY (RKE) — IF EQUIPPED This system allows you to lock or unlock the doors and liftgate or activate the Panic Alarm from distances up to approximately 66 ft (20 m) using a hand-held Remote Keyless Entry (RKE) transmitter.
Page 23: To Unlock The Doors And Liftgate
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 • For vehicles not equipped with the EVIC, perform the To Unlock The Doors And Liftgate following steps: Push and release the UNLOCK button on the RKE transmitter once to unlock the driver’s door, or twice 1.
Page 24: Illuminated Approach - If Equipped
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Pushing the LOCK button on the RKE transmitter To Lock The Doors And Liftgate while you are inside the vehicle will activate the Vehicle Push and release the LOCK button on the RKE transmit- Security Alarm.
Page 25: Flash Lights With Remote Key Lock/Unlock
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 • For vehicles not equipped with the EVIC, perform the NOTE: Pushing the LOCK button on the RKE transmitter following steps: while you are in the vehicle will activate the Vehicle Security Alarm. Opening a door with the Vehicle Security 1.
Page 26: Using The Panic Alarm
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For vehicles not equipped with the EVIC, perform the Alarm activated will cause the alarm to sound. Push the following steps: UNLOCK button to deactivate the Vehicle Security Alarm. 1. Push and hold the UNLOCK button on a programmed RKE transmitter for at least 4 seconds, but no longer Using The Panic Alarm than 10 seconds.
Page 27: Programming Additional Transmitters
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 Programming Additional Transmitters Refer to Sentry Key® “Customer Key Programming”. If you do not have a programmed RKE transmitter, contact your authorized dealer for details. Transmitter Battery Replacement NOTE: Perchlorate Material – special handling may ap- ply.
Page 28: General Information
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: If the RKE transmitter is equipped with a screw, If your RKE transmitter fails to operate from a normal reinstall and tighten the screw until snug. distance, check for these two conditions: 1.
Page 29: How To Use Remote Start
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 NOTE: • Battery at an acceptable charge level • The vehicle must be equipped with an automatic • RKE PANIC button not pushed transmission to be equipped with Remote Start. • System not disabled from previous remote start event •...
Page 30 28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Remote Start Abort Message On Electronic Vehicle To Enter Remote Start Information Center (EVIC) — If Equipped Push and release the REMOTE START button on The following messages will display in the EVIC if the the RKE transmitter twice within five seconds.
Page 31: To Exit Remote Start Without Driving
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 • The engine can be started two consecutive times (two To Exit Remote Start Mode Without Driving The 15-minute cycles) with the RKE transmitter. However, Vehicle the ignition switch must be cycled to the ON/RUN Push and release the REMOTE START button one time or position before you can repeat the start sequence for a allow the engine to run for the entire 15-minute cycle.
Page 32: Door Locks
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE DOOR LOCKS WARNING! Manual Door Locks • For personal security and safety in the event of an Use the manual door lock knob to lock the doors from collision, lock the vehicle doors as you drive as inside the vehicle.
Page 33: Power Door Locks
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 CAUTION! An unlocked vehicle is an invitation to thieves. Always remove the key from the ignition and lock all of the doors when leaving the vehicle unattended. Power Door Locks A power door lock switch is located on the driver’s and front passenger’s door panel.
Page 34 32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Auto Lock Doors — If Equipped 2. Within 15 seconds, cycle the ignition switch between LOCK and ON/RUN and then back to LOCK four The auto door lock feature default condition is enabled. times ending up in the LOCK position (do not start the When enabled, the door locks will lock automatically engine).
Page 35 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 Automatic Unlock Doors On Exit Personal Settings (Customer-Programmable Features)” in “Understanding Your Instrument Panel” for further The doors will unlock automatically if: information. • The Automatic Unlock Doors On Exit feature is en- •...
Page 36: Child-Protection Door Lock System - Rear Doors
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: 2. Insert the tip of the ignition key into the lock and rotate to the LOCK or UNLOCK position. • If you do not hear the chime it means that the system did not enter the programming mode and you will 3.
Page 37: Power Windows - If Equipped
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 NOTE: For emergency exit with the system engaged, move the lock knob up (unlocked position), roll down the window and open the door with the outside door handle. POWER WINDOWS — IF EQUIPPED Power Window Switches The window controls on the driver’s door trim panel control all the door windows.
Page 38 36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: WARNING! • For vehicles not equipped with the Electronic Vehicle Never leave children unattended in a vehicle, and do Information Center (EVIC), the power window not let children play with power windows. Do not switches will remain active for 45 seconds after the leave the Key Fob in or near the vehicle, or in a ignition switch is turned to the LOCK position.
Page 39: Auto-Down
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 Window Lockout Switch The window lockout switch on the driver’s door allows you to disable the window control on the other doors. To disable the window controls on the other doors, push the window LOCKOUT switch.
Page 40: Liftgate
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE LIFTGATE NOTE: The key that is used to start the vehicle is also used to lock or unlock the doors and open the liftgate. To unlock the liftgate, insert the key into the lock and turn it to the right (manual lock models only).
Page 41: Occupant Restraint Systems
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 • Although the liftgate has no inside release mechanism, Gas props support the liftgate in the open position. the liftgate trim panel includes an opening with a However, because the gas pressure drops with tempera- snap-in cap that provides access to release the latch in ture, it may be necessary to assist the props when the event of an electrical system malfunction.
Page 42: Important Safety Precautions
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE restraints or belt-positioning booster seats. Older chil- Important Safety Precautions dren who do not use child restraints or belt- Please pay close attention to the information in this section. positioning booster seats should ride properly buckled It tells you how to use your restraint system properly, to up in a vehicle with a rear seat.
Page 43: Seat Belt Systems
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 8. Do not lean against the door or window. If your Seat Belt Systems vehicle has side air bags, and deployment occurs, the Buckle up even though you are an excellent driver, even side air bags will inflate forcefully into the space on short trips.
Page 44 42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Enhanced Seat Belt Use Reminder System are buckled. The driver should instruct all other occu- (BeltAlert) pants to buckle their seat belts. If an outboard front seat belt is unbuckled while traveling at speeds greater than BeltAlert is a feature intended to remind the driver 5 mph (8 km/h), BeltAlert will provide both audio and and outboard front passenger (if equipped with out-...
Page 45 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 NOTE: If BeltAlert has been deactivated, the Seat Belt WARNING! Reminder Light will continue to illuminate while the driver’s or outboard front passenger’s (if equipped with • Relying on the air bags alone could lead to more BeltAlert) seat belt remains unbuckled.
Page 46 44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) WARNING! (Continued) • Do not allow people to ride in any area of your • A lap belt worn too high can increase the risk of vehicle that is not equipped with seats and seat belts. injury in a collision.
Page 47 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 WARNING! (Continued) WARNING! (Continued) • A seat belt that is too loose will not protect you • A frayed or torn seat belt could rip apart in a collision and leave you with no protection. Inspect properly.
Page 48 46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Pulling Out The Latch Plate Inserting Latch Plate Into Buckle 3. When the seat belt is long enough to fit, insert the latch 4. Position the lap belt so that it is snug and lies low plate into the buckle until you hear a “click.”...
Page 49 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 6. To release the seat belt, push the red button on the buckle. The seat belt will automatically retract to its stowed position. If necessary, slide the latch plate down the webbing to allow the seat belt to retract fully. Second Row Center Seat Belt Operating Instructions The second row center seat belt features a seat belt with...
Page 50 48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 1. Remove the mini-latch and regular latch from its stowed position in the right rear side trim panel. Routing The Rear Center Shoulder Belt Mini-Latch Stowage I n f o r ma t i o n P r o v i d e d b y :...
Page 51 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 Connecting Mini-Latch To Buckle Rear Center Seat Belt Buckled I n f o r ma t i o n P r o v i d e d b y :...
Page 52 50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. When the belt is long enough to fit, insert the mini- latch plate into the mini-buckle until you hear a “click.” 5. Sit back in seat. Slide the regular latch plate up the webbing as far as necessary to allow the seat belt to go around your lap.
Page 53 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 9. To release the belt, push the red button on the buckle. WARNING! (Continued) 10. To disengage the mini-latch from the mini-buckle for • When reattaching the mini-latch and mini-buckle, storage, insert the regular latch plate into the center ensure the seat belt webbing is not twisted.
Page 54 52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Slide the latch plate upward over the folded webbing. The folded webbing must enter the slot at the top of the latch plate. 4. Continue to slide the latch plate up until it clears the folded webbing and the seat belt is no longer twisted.
Page 55 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 NOTE: The adjustable upper shoulder belt anchorage is WARNING! equipped with an Easy Up feature. This feature allows the shoulder belt anchorage to be adjusted in the upward • ONLY use a Seat Belt Extender if it is physically position without pushing or squeezing the release but- required in order to properly fit the original seat ton.
Page 56 54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Seat Belts And Pregnant Women NOTE: These devices are not a substitute for proper seat belt placement by the occupant. The seat belt still must be We recommend that pregnant women use the seat belts worn snugly and positioned properly.
Page 57 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 For additional information, refer to “Installing Child If the passenger seating position is equipped with an Restraints Using The Vehicle Seat Belt” under the “Child ALR and is being used for normal usage: Restraints”...
Page 58 56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE installed in a seating position that has a seat belt with this 3. Allow the seat belt to retract. As the seat belt retracts, feature. Children 12 years old and under should always you will hear a clicking sound.
Page 59 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 How The Active Head Restraints (AHR) Work WARNING! (Continued) The Occupant Restraint Controller (ORC) determines • Failure to replace the seat belt assembly could whether the severity, or type of rear impact will require increase the risk of injury in collisions.
Page 60 58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CAUTION! All occupants, including the driver, should not oper- ate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of a collision.
Page 61 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 1. Grasp the deployed AHR from the rear seat. 3. Pull down then rearward towards the rear of the vehicle then down to engage the locking mechanism. Hand Positioning Points On AHR 2.
Page 62 60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE AHR In Reset Position Review Table Below NOTE: A — Downward Movement B — Rearward Movement • If you have difficulties or problems resetting the Active C — Final Downward Movement To Engage Locking Mechanism Head Restraints, see an authorized dealer.
Page 63: Supplemental Restraint System (Srs)
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 • Front and Side Impact Sensors Supplemental Restraint System (SRS) Air Bag System Components • Seat Belt Pretenioners Your vehicle may be equipped with the following air bag • Seat Belt Buckle Switch system components: •...
Page 64 62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • Being too close to the steering wheel or instrument panel during Advanced Front Air Bag deployment could cause serious injury, including death. Air bags need room to inflate. Sit back, comfortably extending your arms to reach the steering wheel or instrument panel.
Page 65 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 Advanced Front Air Bag Features the driver or front passenger seat belt is buckled. The seat belt buckle switch may adjust the inflation rate of the The Advanced Front Air Bag system has multistage Advanced Front Air Bags.
Page 66 64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE On the other hand, depending on the type and location of WARNING! (Continued) impact, Advanced Front Air Bags may deploy in crashes • Relying on the air bags alone could lead to more with little vehicle front-end damage but that produce a severe injuries in a collision.
Page 67 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 The steering wheel hub trim cover and the upper right Supplemental Side Air Bags side of the instrument panel separate and fold out of the Your vehicle is equipped with two types of side air bags: way as the air bags inflate to their full size.
Page 68 66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The SABs may help to reduce the risk of occupant injury 2. Supplemental Side Air Bag Inflatable Curtains (SABICs): Located above the side windows. The trim during certain side impact and certain rollover events, in covering the SABICs is labeled “SRS AIRBAG”...
Page 69 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 SABICs may help reduce the risk of head injury to front WARNING! and rear seat outboard occupants. SABICs may reduce the risk of injuries in certain side impact and vehicle • Your vehicle is equipped with left and right rollover events, in addition to the injury reduction poten- Supplemental Side Air Bag Inflatable Curtains tial provided by the seat belts and body structure.
Page 70 68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The SABICs and SABs (“Side Air Bags”) are designed to Seat belts (and child restraints where appropriate) are activate in certain side impacts and certain rollover necessary for your protection in all collisions. They also events.
Page 71 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 Side Air Bags deploy independently; a left side impact WARNING! (Continued) deploys the left Side Air Bags only and a right side • Relying on the Side Air Bags alone could lead to impact deploys the right Side Air Bags only.
Page 72 70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The Side Air Bags will not deploy in all rollover events. If you do have a collision, which deploys the air bags, any The rollover sensing-system determines if a rollover or all of the following may occur: event may be in progress and whether deployment is •...
Page 73 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 doctor. If these particles settle on your clothing, follow Enhanced Accident Response System the garment manufacturer’s instructions for cleaning. In the event of an impact, if the communication network Do not drive your vehicle after the air bags have de- remains intact, and the power remains intact, depending ployed.
Page 74 72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE System Reset Procedure The ORC contains a backup power supply system that may deploy the air bags even if the battery loses power or In order to reset the Enhanced Accident Response System it becomes disconnected prior to deployment.
Page 75 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 While the air bag system is designed to be maintenance NOTE: If the speedometer, tachometer, or any engine free, if any of the following occurs, have an authorized related gauges are not working, the Occupant Restraint dealer service the air bag system immediately.
Page 76 74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Maintaining Your Air Bag System WARNING! (Continued) • Do not attempt to modify any part of your air bag WARNING! system. The air bag may inflate accidentally or may • Modifications to any part of the air bag system not function properly if modifications are made.
Page 77 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 Event Data Recorder (EDR) These data can help provide a better understanding of the circumstances in which crashes and injuries occur. This vehicle is equipped with an event data recorder (EDR). The main purpose of an EDR is to record, in NOTE: EDR data are recorded by your vehicle only if a certain crash or near crash-like situations, such as an air non-trivial crash situation occurs;...
Page 78: Child Restraints
76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Child Restraints WARNING! Everyone in your vehicle needs to be buckled up at all In a collision, an unrestrained child can become a times, including babies and children. projectile inside the vehicle. The force required to Every state in the United States, and every Canadian hold even an infant on your lap could become so province, requires that small children ride in proper...
Page 79 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 Before buying any restraint system, make sure that it NOTE: has a label certifying that it meets all applicable Safety • For additional information, refer to www.seatcheck.org or Standards. You should also make sure that you can install call 1–866–SEATCHECK (732–8243).
Page 80 78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Child Size, Height, Weight Or Age Recommended Type Of Child Restraint Larger Children Children who have out-grown their Belt Positioning Booster Seat and the ve- forward-facing child restraint, but are too hicle seat belt, seated in the rear seat of the small to properly fit the vehicle’s seat belt vehicle Children Too Large...
Page 81 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 have outgrown the rear-facing weight or height limit of WARNING! their rear-facing convertible child seat. Children should • Never place a rear-facing child restraint in front of remain in a forward-facing child seat with a harness for an air bag.
Page 82 80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Children Too Large For Booster Seats WARNING! Children who are large enough to wear the shoulder belt • Improper installation can lead to failure of an infant comfortably, and whose legs are long enough to bend or child restraint.
Page 83 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 4. Is the lap part of the seat belt as low as possible, WARNING! touching the child’s thighs and not their stomach? Never allow a child to put the shoulder belt under an 5.
Page 84 82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Recommendations For Attaching Child Restraints Restraint Type Combined Use any attachment method shown with an “X” Below Weight of the LATCH – Seat Belt Only LATCH – Seat Belt + Top Child + Child Lower Anchors Lower Anchors Tether Anchor...
Page 85 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 83 Lower Anchors And Tethers For Children (LATCH) Your vehicle is equipped with the child restraint anchor- Restraint System age system called LATCH, which stands for Lower Anchors and Tethers for CHildren. The LATCH system has three vehicle anchor points for installing LATCH- equipped child seats.
Page 86 84 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE LATCH Positions For Installing Child Restraints In This Vehicle I n f o r ma t i o n P r o v i d e d b y :...
Page 87 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 85 LATCH POSITION TABLE What is the weight limit (child’s weight 65 lbs (29.5 kg) Use the LATCH anchorage system until + weight of the child restraint) for using the combined weight of the child and the the LATCH anchorage system to attach child restraint is 65 lbs (29.5 kg).
Page 88 86 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE LATCH POSITION TABLE Can two child restraints be attached Never “share” a LATCH anchorage with using a common lower LATCH two or more child restraints. If the center anchorage? position does not have dedicated LATCH lower anchorages, use the seat belt to install a child seat in the center position next to a child seat using the LATCH...
Page 89 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 87 Locating The LATCH Anchorages The lower anchorages are round bars that are found at the rear of the seat cushion where it meets the seatback. They are just visible when you lean into the rear seat to install the child restraint.
Page 90 88 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Locating The Upper Tether Anchorages LATCH-compatible child restraint systems will be equipped with a rigid bar or a flexible strap on each side. There are tether strap anchorages behind each Each will have a hook or connector to attach to the lower rear seating position located on the back of the anchorage and a way to tighten the connection to the seat.
Page 91 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 89 To Install A LATCH-Compatible Child Restraint WARNING! 1. If the selected seating position has a Switchable Auto- Never use the same lower anchorage to attach more matic Locking Retractor (ALR) seat belt, stow the seat than one child restraint.
Page 92 90 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Attach the lower hooks or connectors of the child How To Stow An Unused ALR Seat Belt: restraint to the lower anchorages in the selected seat- When using the LATCH attaching system to install a ing position.
Page 93 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 91 Installing Child Restraints Using The Vehicle WARNING! Seat Belt • Improper installation of a child restraint to the The seat belts in the passenger seating positions are LATCH anchorages can lead to failure of the re- equipped with a Switchable Automatic Locking Retractor straint.
Page 94 92 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lap/Shoulder Belt Systems For Installing Child Restraints In This Vehicle I n f o r ma t i o n P r o v i d e d b y :...
Page 95 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 93 LAP/SHOULDER BELT SYSTEMS What is the weight limit (child’s weight Weight limit of the Always use the tether anchor when using the + weight of the child restraint) for Child Restraint seat belt to install a forward facing child using the Tether Anchor with the seat restraint, up to the recommended weight belt to attach a forward facing...
Page 96 94 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Installing A Child Restraint With A Switchable 5. To lock the seat belt, pull down on the shoulder part of the seat belt until you have pulled all the seat belt Automatic Locking Retractor (ALR) webbing out of the retractor.
Page 97 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 95 strap. See the section “Installing Child Restraints WARNING! (Continued) Using the Top Tether Anchorage” for directions to tether strap of a rear-facing car seat to the tether attach a tether anchor. anchorage that is approved for that seating position, 9.
Page 98 96 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 1. Look behind the seating position where you plan to install the child restraint to find the tether anchorage. You may need to move the seat forward to provide better access to the tether anchorage. If there is no top tether anchorage for that seating position, move the child restraint to another position in the vehicle if one is available.
Page 99: Transporting Pets
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 97 ENGINE BREAK-IN RECOMMENDATIONS WARNING! A long break-in period is not required for the engine and • An incorrectly anchored tether strap could lead to drivetrain (transmission and axle) in your vehicle. increased head motion and possible injury to the child.
Page 100: Safety Tips
98 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CAUTION! WARNING! Never use Non-Detergent Oil or Straight Mineral Oil • Do not leave children or animals inside parked in the engine or damage may result. vehicles in hot weather. Interior heat build-up may cause serious injury or death.
Page 101: Exhaust Gas
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 99 The best protection against carbon monoxide entry into Exhaust Gas the vehicle body is a properly maintained engine exhaust WARNING! system. Exhaust gases can injure or kill. They contain carbon Whenever a change is noticed in the sound of the exhaust monoxide (CO), which is colorless and odorless.
Page 102: Safety Checks You Should Make Inside The Vehicle
100 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE dealer. If the light stays on, flickers, or comes on while Safety Checks You Should Make Inside The driving, have the system checked by an authorized Vehicle dealer. Seat Belts Defroster Inspect the seat belt system periodically, checking for cuts, frays, and loose parts.
Page 103 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 101 WARNING! WARNING! (Continued) • Check mounting of mats on a regular basis. Always Pedals that cannot move freely can cause loss of properly reinstall and secure floor mats that have vehicle control and increase the risk of serious per- been removed for cleaning.
Page 104: Periodic Safety Checks You Should Make Outside The Vehicle
102 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Door Latches Periodic Safety Checks You Should Make Outside The Vehicle Check for positive closing, latching, and locking. Tires Fluid Leaks Examine tires for excessive tread wear and uneven wear Check area under vehicle after overnight parking for fuel, patterns.
Page 105: Understanding The Features Of Your Vehicle
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS MIRRORS ......107 Uconnect® PHONE — IF EQUIPPED ..111 ▫...
Page 106 104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Commands ......144 TO OPEN AND CLOSE THE HOOD ..160 ▫...
Page 107 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 ▫ Windshield Wiper Operation ... . .169 PARKVIEW® REAR BACK UP CAMERA — IF EQUIPPED ......176 ▫...
Page 108 106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Closing Sunroof — Express....189 ▫ Door Storage ......198 ▫...
Page 109: Mirrors
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 MIRRORS Inside Day/Night Mirror A two-point pivot system allows for horizontal and vertical mirror adjustment. Adjust the mirror to center on the view through the rear window. Headlight glare can be reduced by moving the small control under the mirror to the night position (toward the rear of vehicle).
Page 110: Automatic Dimming Mirror - If Equipped
108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Automatic Dimming Mirror — If Equipped This mirror automatically adjusts for headlight glare from vehicles behind you. You can turn the feature on or off by pressing the button at the base of the mirror. A light to the left of the button will illuminate to indicate when the dimming feature is activated.
Page 111: Outside Mirror - Driver Side
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 Outside Mirror — Driver Side WARNING! (Continued) Adjust the flat outside mirror so you can just see the side collide with another vehicle or other object. Use your of your vehicle in the part of the mirror closest to the inside mirror when judging the size or distance of a vehicle with your head close to the door glass.
Page 112: Power Mirrors
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE When you are finished adjusting the mirror, turn the Power Mirrors control to the center position to prevent accidentally The power mirror control is located on the driver’s door moving a mirror. trim panel. Heated Mirrors —...
Page 113: Sun Visor Sliding Feature
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 Uconnect® PHONE — IF EQUIPPED Uconnect® Phone is a voice-activated, hands-free, in- vehicle communications system. Uconnect® Phone al- lows you to dial a phone number with your mobile phone using simple voice commands (e.g., “Call” “Mike”...
Page 114 112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Uconnect® Phone allows you to transfer calls between WARNING! the system and your mobile phone as you enter or exit your vehicle and enables you to mute the system’s Any voice commanded system should be used only microphone for private conversation.
Page 115: Operation
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 Voice Command Button Operation Voice commands can be used to operate the Uconnect® Actual button location may vary with the ra- Phone and to navigate through the Uconnect® Phone dio. The individual buttons are described in the menu structure.
Page 116 114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE part of the command when you are asked for it. For To activate the Uconnect® Phone, simply push the example, you can use the compound form voice com- button and follow the audible prompts for direc- mand “Phonebook New Entry,”...
Page 117 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 The following are general phone to Uconnect® Phone You will then be asked to give your mobile phone a pairing instructions: priority level between one and seven, with one being the highest priority. You can pair up to seven mobile phones 1.
Page 118 116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The system will prompt you to say the number you or downloaded phonebook. To learn how to store a want to call. name in the phonebook, refer to “Add Names to Your Uconnect®...
Page 119 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 • When prompted, enter the number designation (e.g., Phonebook Download — Automatic Phonebook “Home,” “Work,” “Mobile,” or “Other”). This will Transfer From Mobile Phone allow you to store multiple numbers for each phone- If equipped and specifically supported by your phone, book entry, if desired.
Page 120 118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • A maximum of 2,000 entries per phone will be down- Edit Uconnect® Phonebook Entries loaded and updated every time a phone is connected NOTE: Editing phonebook entries is recommended to the Uconnect® Phone. when the vehicle is not in motion.
Page 121 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 After you are finished editing an entry in the phonebook, • After you enter the Phonebook Delete menu, you will you will be given the opportunity to edit another entry in then be asked for the name of the entry that you wish the phonebook, call the number you just edited, or return to delete.
Page 122 120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Delete/Erase “All” Uconnect® Phonebook Entries List All Names In The Uconnect® Phonebook • Push the button to begin. • Push the button to begin. • After the “Ready” prompt and the following beep, say •...
Page 123: Phone Call Features
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 Answer Or Reject An Incoming Call — Call Phone Call Features Currently In Progress The following features can be accessed through the Uconnect® Phone if the feature(s) are available on your If a call is currently in progress and you have another mobile service plan.
Page 124 122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE call. The first call will be on hold while the second call Conference Call is in progress. To go back to the first call, refer to When two calls are in progress (one active and one on “Toggling Between Calls”...
Page 125 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 there is a call on hold, it will become the new active Call Continuation call. If the active call is terminated by the phone far Call continuation is the progression of a phone call on the end, a call on hold may not become active automati- Uconnect®...
Page 126: Uconnect® Phone Features
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Emergency Assistance Uconnect® Phone Features If you are in an emergency and the mobile phone is Language Selection reachable: To change the language that the Uconnect® Phone is using: • Pick up the phone and manually dial the emergency 1.
Page 127 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 NOTE: WARNING! • The emergency number dialed is based on the country To use your Uconnect® Phone System in an emer- where the vehicle is purchased (911 for the U.S. and gency, your mobile phone must be: Canada and 060 for Mexico).
Page 128 126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To do this, push the button and say “Setup,” fol- You can use your Uconnect® Phone to access a voice mail lowed by “Towing Assistance.” When prompted say system or an automated service, such as a paging service 1-800-521-2779 for U.S./Canada, say 55-14-3454 for or automated customer service line.
Page 129 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 call and then push the button and say “Send.” The could push the button and say, “Pair a Phone” to system will prompt you to enter the name or number select that option without having to listen to the rest of and say the name of the phonebook entry you wish to the voice prompt.
Page 130 128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE notification to inform you of your phone and network situation, after successfully dialing a number the user status when you are attempting to make a phone call may feel that the call did not go through even though the using Uconnect®...
Page 131: Advanced Phone Connectivity
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 List Paired Mobile Phone Names Advanced Phone Connectivity Transfer Call To And From Mobile Phone • Push the button to begin. The Uconnect® Phone allows ongoing calls to be trans- • After the “Ready” prompt and the following beep, say ferred from your mobile phone to the Uconnect®...
Page 132: Things You Should Know About Your Uconnect® Phone
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Select Another Mobile Phone Delete Uconnect® Phone Paired Mobile Phones This feature allows you to select and start using another • Push the button to begin. phone paired with the Uconnect® Phone. • After the “Ready” prompt and the following beep, say •...
Page 133 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 Voice Training best results, the Voice Training session should be com- pleted when the vehicle is parked with the engine For users experiencing difficulty with the system recog- running, all windows closed, and the blower fan nizing their voice commands or numbers, the Uconnect®...
Page 134 132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Command • Smooth road surface For best performance: • Fully closed windows • Adjust the rearview mirror to provide at least ½ inch • Dry weather condition (1 cm) gap between the overhead console (if equipped) NOTE: and the mirror.
Page 135 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 • Phonebook (Downloaded and Uconnect® Phone Lo- • Smooth Road Surface cal) name recognition rate is optimized when the • Fully Closed Windows entries are not similar. • Dry Weather Conditions • Numbers must be spoken in single digits. “800” must be spoken “eight-zero-zero”...
Page 136 134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Text Reply Send Messages: Uconnect® Phone can read or send new messages on You can send messages using Uconnect® Phone. To send your phone. a new message: Read Messages: 1. Push the button.
Page 137 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 List of Preset Messages: 11. See you in 15 minutes. 1. Yes. 12. I am on my way. 2. No. 13. I’ll be late. 3. Where are you? 14. Are you there yet? 4.
Page 138 136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Turn Voice Text Reply Incoming Announcement Bluetooth® Communication Link ON/OFF Mobile phones have been found to lose connection to the Uconnect® Phone. When this happens, the connection Turning the Voice Text Reply Incoming Announcement can generally be reestablished by switching the phone OFF will stop the system from announcing the new off/on.
Page 139 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 I n f o r ma t i o n P r o v i d e d b y :...
Page 140 138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE I n f o r ma t i o n P r o v i d e d b y :...
Page 141 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 I n f o r ma t i o n P r o v i d e d b y :...
Page 142 140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Commands Voice Commands Primary Alternate (s) Primary Alternate (s) zero call cancel three confirmation prompts four continue five delete dial seven download eight edit nine emergency star (*) English plus (+) erase all pound (#) Espanol add location...
Page 143 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 Voice Commands Voice Commands Primary Alternate (s) Primary Alternate (s) help previous home record again language redial list names return to main menu return or main menu list phones select phone select mobile send mute set up...
Page 144: General Information
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information VOICE COMMAND — IF EQUIPPED This device complies with Part 15 of the FCC rules and Voice Command System Operation RSS 210 of Industry Canada. Operation is subject to the following conditions: The Uconnect®...
Page 145 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 Pushing the Voice Command button while the WARNING! system is speaking is known as “barging in.” The Any voice commanded system should be used only system will be interrupted, and after the beep, you can in safe driving conditions following all applicable add or change commands.
Page 146 144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE At any point, if the system does not recognize one of your 3. Use the ON/OFF VOLUME rotary knob to adjust the commands, you will be prompted to repeat it. volume to a comfortable level while the Voice Com- mand system is speaking.
Page 147 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 • “USB” (to switch to USB mode) Radio FM To switch to the FM band, say “FM” or “Radio FM.” In this • “Bluetooth Streaming” (to switch to Bluetooth® Stream- mode, you may say the following commands: ing mode) •...
Page 148 146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • “Previous Channel” (to select the previous channel) USB Mode To switch to USB mode, say “USB.” In this mode, you • “List Channel” (to hear a list of available channels) may say the following commands: •...
Page 149 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 Memo Mode – “Previous” (to play the previous memo) To switch to the voice recorder mode, say “Memo.” – “Delete” (to delete a memo) In this mode, you may say the following commands: –...
Page 150: Voice Training
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • “Tutorial” 2. Repeat the words and phrases when prompted by Uconnect® Voice. For best results, the “Voice Training” • “Voice Training” session should be completed when the vehicle is NOTE: Keep in mind that you have to push the Voice parked, engine running, all windows closed, and the Command button first and wait for the beep...
Page 151: Power Seats - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 WARNING! (Continued) • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. In a collision, people riding in these areas are more likely to be seriously injured or killed.
Page 152 150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Adjusting The Seat Forward Or Rearward WARNING! The seat can be adjusted both forward and rearward. • Adjusting a seat while driving may be dangerous. Push the seat switch forward or rearward, the seat will Moving a seat while driving could result in loss of move in the direction of the switch.
Page 153: Heated Seats - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 30 minutes of continuous operation. At that time, the Heated Seats — If Equipped display will change from HI to LO, indicating the change. On some models, the front driver and passenger seats When the LOW-level heating is selected, the system may be equipped with heaters in both the seat cushions automatically turns the heater and the indicator light...
Page 154: Manual Front Seat Adjustment
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) • Do not place anything on the seat or seatback that insulates against heat, such as a blanket or cushion. This may cause the seat heater to overheat. Sitting in a seat that has been overheated could cause serious burns due to the increased surface tempera- ture of the seat.
Page 155: Manual Seat Height Adjustment - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 WARNING! • Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • Seats should be adjusted before fastening the seat belts and while the vehicle is parked.
Page 156: Manual Lumbar - If Equipped
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Manual Lumbar — If Equipped Driver’s Seatback Recline The lumbar adjustment handle is located on the inboard To adjust the seatback, lift the lever located on the side of the driver’s seatback. Rotate the lever downward outboard side of the seat, lean back to the desired angle to increase the lumbar support or rotate the lever upward and release the lever.
Page 157: Head Restraints
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 WARNING! WARNING! Do not ride with the seatback reclined so that the The head restraints for all occupants must be prop- shoulder belt is no longer resting against your chest. erly adjusted prior to operating the vehicle or occu- In a collision you could slide under the seat belt, pying a seat.
Page 158 156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE When AHRs deploy during a rear impact, the front half of the head restraint extends forward to minimize the gap between the back of the occupant’s head and the AHR. This system is designed to help prevent or reduce the extent of injuries to the driver and front passenger in certain types of rear impacts.
Page 159 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 Active Head Restraint (Normal Position) Active Head Restraint (Tilted Position) I n f o r ma t i o n P r o v i d e d b y :...
Page 160 158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: WARNING! (Continued) • The head restraints should only be removed by quali- • Active Head Restraints may be deployed if they are fied technicians, for service purposes only. If either of struck by an object such as a hand, foot or loose the head restraints require removal, see your autho- cargo.
Page 161: Folding Rear Seat
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 Folding Rear Seat To provide additional storage area, each rear seatback can be folded forward. Pull the strap forward to fold the rear seatback flat. Folded Rear Seat To raise the seatback, pull the strap forward and lift the seatback into its upright position.
Page 162: Reclining Rear Seat - If Equipped
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! WARNING! Be certain that the seatback is securely locked into Do not ride with the seatback reclined so that the position. If the seatback is not securely locked into shoulder belt is no longer resting against your chest. position the seat will not provide the proper stability In a collision you could slide under the seat belt and for child seats and/or passengers.
Page 163 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 2. Move the safety latch, located outside the vehicle under the front edge of the hood, toward the center and raise the hood. Hood Release Lever Hood Safety Latch Location I n f o r ma t i o n P r o v i d e d b y :...
Page 164 162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Lift the hood prop rod, clipped to the right side (left side CAUTION! facing hood) of the engine compartment to secure the hood in the open position. Place the hood prop at the To prevent possible damage: location stamped into the inner hood surface.
Page 165: Lights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 LIGHTS Headlights And Parking Lights Turn the end of the multifunction lever to the first detent Multifunction Lever to turn on the parking lights. Turn the end of the lever to The multifunction lever controls the operation of the the second detent to turn on the headlights.
Page 166: Daytime Running Lights - If Equipped
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Daytime Running Lights — If Equipped The high beam lights will come on as Daytime Running Lights (lower intensity), whenever the ignition is ON, the engine is running, the headlight switch is off, the parking brake is off, the turn signal is off, and the shift lever is in any position except PARK.
Page 167: Turn Signals
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 NOTE: If either light remains on and does not flash, or Turn Signals there is a very fast flash rate, check for a defective outside Move the multifunction lever up or down and the arrows light bulb.
Page 168: Flash-To-Pass
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rotate the center portion of the lever upward to the next Flash-To-Pass detent position to brighten the odometer and radio when You can signal another vehicle with your headlights by the parking lights or headlights are on. lightly pulling the multifunction lever toward you.
Page 169: Map/Reading Lights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 Map/Reading Lights These lights are mounted between the sun visors above the rear view mirror. Each light is turned on by pressing the button. Press the button a second time to turn the light off.
Page 170: Windshield Wipers And Washers
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WINDSHIELD WIPERS AND WASHERS CAUTION! The windshield wiper/washer control lever is lo- • Turn the windshield wipers off when driving cated on the right side of the steering column. through an automatic car wash. Damage to the The front wipers are operated by rotating a switch, windshield wipers may result if the wiper control located on the end of the lever.
Page 171: Windshield Wiper Operation
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 Windshield Wiper Operation Intermittent Wiper System Rotate the end of the lever upward to the second detent Use the intermittent wiper when weather conditions make past the intermittent settings for low-speed wiper opera- a single wiping cycle, with a variable pause between tion.
Page 172: Mist Feature
170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE lever is released, and then resume the intermittent inter- NOTE: The mist feature does not activate the washer val previously selected. pump; therefore, no washer fluid will be sprayed on the windshield. The wash function must be used in order to If the lever is pulled while in the off position, the wipers spray the windshield with washer fluid.
Page 173: Tilt Steering Column
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 TILT STEERING COLUMN This feature allows you to tilt the steering column upward or downward. The tilt steering column lever is located on the left side of the steering column, below the turn signal lever. Push down on the lever to unlock the steering column.
Page 174: Electronic Speed Control - If Equipped
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) the driver to lose control of the vehicle. Failure to follow this warning may result in serious injury or death. ELECTRONIC SPEED CONTROL — IF EQUIPPED When engaged, the Electronic Speed Control takes over accelerator operations at speeds greater than 25 mph (40 km/h).
Page 175: To Activate
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 NOTE: In order to ensure proper operation, the Elec- WARNING! tronic Speed Control System has been designed to shut down if multiple Speed Control functions are operated at Leaving the Electronic Speed Control system on the same time.
Page 176: To Deactivate
174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The speed increment shown is dependant on the chosen To Deactivate speed unit of U.S. (mph) or Metric (km/h): A soft tap on the brake pedal, pushing the CANCEL button, or normal brake pressure while slowing the U.S.
Page 177: To Accelerate For Passing
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 To Decrease Speed • If the button is continually pressed, the set speed will continue to decrease until the button is released, then When the Electronic Speed Control is set, you can de- the new set speed will be established.
Page 178: Parkview® Rear Back Up Camera - If Equipped
176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE After five seconds this note will disappear. The WARNING! ParkView® camera is located on the rear of the vehicle above the rear license plate. Electronic Speed Control can be dangerous where the system cannot maintain a constant speed. Your ve- When the vehicle is shifted out of REVERSE, the rear hicle could go too fast for the conditions, and you camera mode is exited and the last selected touchscreen...
Page 179 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 When displayed, static grid lines will illustrate the width that will help indicate the distance to the rear of the of the vehicle while a dashed center-line will indicate the vehicle. The following table shows the approximate center of the vehicle to assist with aligning to a hitch/ distances for each zone: receiver.
Page 180: Garage Door Opener - If Equipped
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE GARAGE DOOR OPENER — IF EQUIPPED CAUTION! HomeLink® replaces up to three remote controls (hand- • To avoid vehicle damage, ParkView® should only held transmitters) that operate devices such as garage be used as a parking aid. The ParkView® camera is door openers, motorized gates, lighting or home security unable to view every obstacle or object in your systems.
Page 181 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 HomeLink® Buttons/Overhead Consoles HomeLink® Buttons/Sunvisor/Headliner NOTE: HomeLink® is disabled when the Vehicle Secu- rity Alarm is active. I n f o r ma t i o n P r o v i d e d b y :...
Page 182: Before You Begin Programming Homelink
180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Before You Begin Programming HomeLink® Be sure that your vehicle is parked outside of the garage • Erasing all channels should only be performed when before you begin programming. programming HomeLink® for the first time. Do not erase channels when programming additional buttons.
Page 183 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181 1. Cycle the ignition to the ON/RUN position. 2. Place the hand-held transmitter 1 to 3 inch (3 to 8 cm) away from the HomeLink® button you wish to program while keeping the HomeLink® indicator light in view. 3.
Page 184 182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 5. At the garage door opener motor (in the garage), To program the remaining two HomeLink® buttons, locate the “LEARN” or “TRAINING” button. This can repeat each step for each remaining button. DO NOT usually be found where the hanging antenna wire is erase the channels.
Page 185: Programming A Non-Rolling Code
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183 5. Push and hold the programmed HomeLink® button Programming A Non-Rolling Code and observe the indicator light. For programming Garage Door Openers manufactured • If the indicator light stays on constantly, program- before 1995. ming is complete and the garage door/device should 1.
Page 186: Canadian/Gate Operator Programming
184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Without releasing the button proceed with “Program- It may be helpful to unplug the device during the cycling ming A Non-Rolling Code” step 2 and follow all process to prevent possible overheating of the garage remaining steps.
Page 187 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 185 4. Watch for the HomeLink® indicator to change flash Reprogramming A Single HomeLink® Button rates. When it changes, it is programmed. It may take (Canadian/Gate Operator) up to 30 seconds or longer in rare cases. The garage To reprogram a channel that has been previously trained, door may open and close while you are programming.
Page 188: Using Homelink
186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Using HomeLink® Troubleshooting Tips To operate, push and release the programmed HomeLink® If you are having trouble programming HomeLink®, button. Activation will now occur for the programmed here are some of the most common solutions: device (i.e., garage door opener, gate operator, security •...
Page 189: General Information
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 187 General Information WARNING! This device complies with FCC rules Part 15 and Industry Your motorized door or gate will open and close Canada RSS-210. Operation is subject to the following while you are programming the universal trans- two conditions: ceiver.
Page 190: Power Sunroof - If Equipped
188 UNDERSTANDING THE FEATURES OF YOUR VEHICLE POWER SUNROOF — IF EQUIPPED WARNING! The power sunroof switch is located on the overhead • Never leave children alone in a vehicle, or with console. access to an unlocked vehicle. Never leave the Key Fob in or near the vehicle, or in a location acces- sible to children.
Page 191: Opening Sunroof - Express
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 189 position. The sunroof will close fully and stop automati- Opening Sunroof — Express cally. This is called “Express Close”. During Express Press the switch rearward and release it within one-half Close operation, any movement of the switch will stop second.
Page 192: Venting Sunroof - Express
190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE open or partially open positions. This is a normal occur- Venting Sunroof — Express rence and can be minimized. If the buffeting occurs with Press and release the Vent button within one half second the rear windows open, open the front and rear windows and the sunroof will open to the vent position.
Page 193: Electrical Power Outlets
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 191 For Vehicles Equipped With The EVIC The power sunroof switch will remain active for up to approximately ten minutes after the ignition switch is turned to the LOCK position. Opening either front door will cancel this feature.
Page 194 192 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! • Do not exceed the maximum power of 160 Watts (13 Amps) at 12 Volts. If the 160 Watt (13 Amp) power rating is exceeded the fuse protecting the system will need to be replaced. •...
Page 195 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 193 WARNING! CAUTION! To avoid serious injury or death: • Many accessories that can be plugged in draw • Only devices designed for use in this type of outlet power from the vehicle’s battery, even when not in should be inserted into any 12 Volt outlet.
Page 196: Power Inverter - If Equipped
194 UNDERSTANDING THE FEATURES OF YOUR VEHICLE POWER INVERTER — IF EQUIPPED A 115 Volt (150 Watt) AC power inverter is located on the front of the center console for added convenience. This outlet can power mobile phones, electronics and other low power devices requiring power up to 150 Watts.
Page 197 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 195 WARNING! (Continued) CAUTION! (Continued) • Do not touch with wet hands. • Accessories that draw higher power (i.e., coolers, • Close the lid when not in use. vacuum cleaners, lights, etc.) will degrade the bat- •...
Page 198: Cupholders
196 UNDERSTANDING THE FEATURES OF YOUR VEHICLE There are two cupholders located in the back for the rear CUPHOLDERS passengers. Your vehicle is equipped with four cupholders. There are two illuminated cupholders located in the front. Rear Cupholders Front Cupholders I n f o r ma t i o n P r o v i d e d b y :...
Page 199: Storage
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 197 To open the lower glove compartment, pull outward on STORAGE the release handle. Glove Compartment And Storage Bin Located on the passenger side of the instrument panel are an upper storage bin and a lower glove compartment. Glove Compartment Storage Bins 1 —...
Page 200: Door Storage
198 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Door Storage The interior door panels are equipped with lower storage areas. Rear Door Storage Front Door Storage I n f o r ma t i o n P r o v i d e d b y :...
Page 201: Console Features
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 199 To open the lower storage compartment, lift upward on CONSOLE FEATURES the lower handle to unlatch the lower storage compart- The floor console contains both an upper and lower ment and lift the lid open. storage compartment.
Page 202: Cargo Area Features
200 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To install the Cargo Cover, insert either end of the cover WARNING! into one of the two notches located in the rear trim panels. With one of the cover ends installed, push inward Do not operate this vehicle with a console compart- on the opposite end and install it into the same notch ment lid in the open position.
Page 203 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 201 Using the handle, pull the cover toward you and guide WARNING! the rear cover posts into the guides located on both sides of the rear trim panel. In a collision a cargo cover loose in the vehicle could cause injury.
Page 204: Removable Load Floor
202 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Removable Load Floor Cargo Tie-Down Loops The cargo area load floor is removable and can be There are four tie-downs (D-rings) installed in the cargo washed with mild soap and water. area for securing cargo. Removable Load Floor Cargo Area Tie-Downs I n f o r ma t i o n P r o v i d e d b y :...
Page 205 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 203 WARNING! WARNING! (Continued) • Place as much cargo as possible in front of the rear • Cargo tie-down loops are not safe anchors for a axle. Too much weight or improperly placed weight child seat tether strap.
Page 206: Fold Down Speakers - If Equipped
204 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Fold Down Speakers — If Equipped REAR WINDOW FEATURES When the liftgate is open, the speakers can swing down off Rear Window Wiper/Washer the trim panel to face rearward, for tailgating and other The rear wiper/washer is controlled by a rotary switch activities.
Page 207: Rear Window Defroster
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 205 Rotate the center portion of the lever upward to Rear Window Defroster the first detent position for rear wiper operation. The rear window defroster button is located on NOTE: The rear wiper operates in an intermittent mode the climate controls mode control knob.
Page 208: Roof Luggage Rack - If Equipped
206 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ROOF LUGGAGE RACK — IF EQUIPPED CAUTION! The crossbars and siderails are designed to carry the Failure to follow these cautions can cause damage to cargo on vehicles equipped with a luggage rack. The load the heating elements: must not exceed 150 lbs (68 kg), and should be uniformly •...
Page 209 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 207 approximately eight turns, then move the crossbar to the CAUTION! desired position, keeping the crossbars perpendicular to the luggage rack side rails. Once the crossbar is in one of • To prevent damage to the roof of your vehicle, DO the seven detent positions, retighten the thumb screws to NOT carry any loads on the luggage rack without lock the crossbar into position.
Page 210 208 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! (Continued) • Travel at reduced speeds and turn corners carefully when carrying large or heavy loads on the roof rack. Wind forces, due to natural causes or nearby truck traffic, can add sudden upward lift to a load. This is especially true on large flat loads and may result in damage to the cargo or your vehicle.
Page 211 UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS INSTRUMENT PANEL FEATURES ..212 ▫ Average Fuel Economy....234 INSTRUMENT CLUSTER ....213 ▫...
Page 212 210 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Operation Instructions — DISC Mode For CD ▫ Operation Instructions — CD MODE For And MP3/WMA Audio Play, DVD – Video . . .250 CD And MP3 Audio Play ....265 ▫...
Page 213 UNDERSTANDING YOUR INSTRUMENT PANEL 211 ▫ Using This Feature.....288 CD/DVD DISC MAINTENANCE ...296 ▫...
Page 214: Instrument Panel Features
212 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT PANEL FEATURES 1 — Air Outlet 5 — Storage Bin 9 — Heated Seat Switch – If Equipped 2 — Demisters 6 — Glove Compartment 10 — Hazard Warning Flasher 3 — Instrument Cluster 7 —...
Page 215: Instrument Cluster
UNDERSTANDING YOUR INSTRUMENT PANEL 213 INSTRUMENT CLUSTER I n f o r ma t i o n P r o v i d e d b y :...
Page 216: Instrument Cluster Descriptions
214 UNDERSTANDING YOUR INSTRUMENT PANEL If jump starting is required, refer to “Jump Starting INSTRUMENT CLUSTER DESCRIPTIONS Procedures” in “What To Do In Emergencies”. 1. Fuel Gauge /Fuel Door Reminder 3. Electronic Throttle Control (ETC) Light When the ignition switch is in the ON/RUN position, the pointer will show the level of fuel This light informs you of a problem with the remaining in the fuel tank.
Page 217 UNDERSTANDING YOUR INSTRUMENT PANEL 215 on briefly as a bulb check. If the light does not come on 6. Speedometer during starting, have the system checked by an autho- The Speedometer shows the vehicle speed in miles per rized dealer. hour (MPH) and kilometers per hour (km/h).
Page 218 216 UNDERSTANDING YOUR INSTRUMENT PANEL If the vehicle is driven more than 1 mile (1.6 km) with the conventional brake system will continue to operate either turn signal on, a continuous chime will sound to normally if the BRAKE warning light is not on. alert you to turn the signals off.
Page 219 UNDERSTANDING YOUR INSTRUMENT PANEL 217 12. Tachometer vehicle. If the temperature reading does not return to normal, turn the engine off immediately and call for The white area of the scale shows the permissible engine service. Refer to “If Your Engine Overheats” in “What To revolutions-per-minute (RPM x 1000) for each gear range.
Page 220 218 UNDERSTANDING YOUR INSTRUMENT PANEL In this case, the light will remain on until the condition WARNING! has been corrected. If the problem is related to the brake booster, the ABS pump will run when applying the brake Driving a vehicle with the red brake light on is and a brake pedal pulsation may be felt during each stop.
Page 221 UNDERSTANDING YOUR INSTRUMENT PANEL 219 The light also will turn on when the parking brake is WARNING! applied with the ignition switch in the ON/RUN position. If you continue operating the vehicle when the NOTE: This light shows only that the parking brake is Transmission Temperature Warning Light is illumi- applied.
Page 222 220 UNDERSTANDING YOUR INSTRUMENT PANEL The gauge pointer will likely indicate a higher tempera- WARNING! ture when driving in hot weather, up mountain grades, or when towing a trailer. It should not be allowed to A hot engine cooling system is dangerous. You or exceed the upper limits of the normal operating range.
Page 223 UNDERSTANDING YOUR INSTRUMENT PANEL 221 20. Shift Lever Indicator the vehicle manufacturer on the vehicle placard or tire inflation pressure label. (If your vehicle has tires of a The Shift Lever Indicator is self-contained within the different size than the size indicated on the vehicle placard instrument cluster.
Page 224 222 UNDERSTANDING YOUR INSTRUMENT PANEL maintain correct tire pressure, even if under-inflation has tires or wheels on your vehicle, to ensure that the not reached the level to trigger illumination of the TPMS replacement or alternate tires and wheels allow the TPMS low tire pressure telltale.
Page 225 UNDERSTANDING YOUR INSTRUMENT PANEL 223 23. Odometer Display/Trip Odometer Display Area Vehicle Odometer Messages When the appropriate conditions exist, the following This display indicates the total distance the vehicle has odometer messages will display: been driven. door ......Door Ajar NOTE: U.S.
Page 226 224 UNDERSTANDING YOUR INSTRUMENT PANEL gASCAP “HOTOIL” message will be displayed in the odometer along with a chime. If the vehicle diagnostic system determines that the fuel filler cap is loose, improperly installed, or damaged, a Refer to “Engine Oil Overheating” under in “What To Do “gASCAP”...
Page 227 UNDERSTANDING YOUR INSTRUMENT PANEL 225 oil change indicator system (after performing the sched- If the bulb does not come on when turning the key from uled maintenance), refer to the following procedure: OFF to ON/RUN, have the condition checked promptly. Certain conditions, such as a loose or missing gas cap, 1.
Page 228 226 UNDERSTANDING YOUR INSTRUMENT PANEL 27. Electronic Stability Control (ESC) Activation/ WARNING! Malfunction Indicator Light — If Equipped A malfunctioning catalytic converter, as referenced The “ESC Activation/Malfunction Indicator above, can reach higher temperatures than in normal Light” in the instrument cluster will come on operating conditions.
Page 229 UNDERSTANDING YOUR INSTRUMENT PANEL 227 • Each time the ignition is turned to ON/RUN, the When blinking: The 4WD system is temporarily dis- ESC system will be ON, even if it was turned off abled due to overload condition. previously. 29.
Page 230: Mini-Trip Computer - If Equipped
228 UNDERSTANDING YOUR INSTRUMENT PANEL MINI-TRIP COMPUTER — IF EQUIPPED Control Buttons The Mini-Trip Computer is located in the instrument cluster and features a driver-interactive trip information and temperature display. NOTE: The system will display the last known outside temperature when starting the vehicle and may need to be driven several minutes before the updated tempera- ture is displayed.
Page 231 UNDERSTANDING YOUR INSTRUMENT PANEL 229 STEP Button Trip Odometer (ODO) Push the STEP button located on the steering wheel to This display shows the distance traveled since the last scroll through sub menus (i.e., Temperature, Trip Func- reset. Push and release the STEP button on the instru- tions: Odometer, Trip A, Trip B).
Page 232: Electronic Vehicle Information Center (Evic) - If Equipped
230 UNDERSTANDING YOUR INSTRUMENT PANEL The EVIC consists of the following: ELECTRONIC VEHICLE INFORMATION CENTER (EVIC) — IF EQUIPPED • System Status The Electronic Vehicle Information Center (EVIC) fea- • Units tures a driver-interactive display that is located in the instrument cluster.
Page 233 UNDERSTANDING YOUR INSTRUMENT PANEL 231 The system allows the driver to select information by MENU Button pushing the following buttons mounted on the steering Push and release the MENU button to scroll wheel: through the main menus (Fuel Economy, Warn- ings, Timer, Units, System, Personal Settings) or to exit submenus.
Page 234 232 UNDERSTANDING YOUR INSTRUMENT PANEL When the appropriate conditions exist, the EVIC displays • Doors Ajar (with vehicle graphic showing which the following messages: doors are open. A single chime sounds if the vehicle is in motion). • Turn Signal On (with a continuous warning chime after 1 mile (1.6 km) of distance travelled) •...
Page 235: Engine Oil Change Indicator System - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 233 • Low Tire Unless reset, this message will continue to display each time you turn the ignition switch to the ON/RUN • Low Tire Pressure Display for Premium TPM System position. To turn off the message temporarily, push and •...
Page 236: Evic Functions
234 UNDERSTANDING YOUR INSTRUMENT PANEL time within three seconds of resetting the currently EVIC Functions displayed function. Reset ALL will be displayed during • Compass/Temperature/Audio this three-second window. • Average Fuel Economy Compass/Temperature/Audio • Distance To Empty (DTE) Push and release the COMPASS button to display one of eight compass headings to indicate the direction the •...
Page 237: Distance To Empty (Dte)
UNDERSTANDING YOUR INSTRUMENT PANEL 235 Distance To Empty (DTE) Tire Pressure Monitor (TPM) Shows the estimated distance that can be traveled with Refer to “Starting And Operating”, “Tire Pressure Moni- the fuel remaining in the tank. This estimated distance is toring System (TPMS)”...
Page 238: Display Units Of Measure In
236 UNDERSTANDING YOUR INSTRUMENT PANEL Pushing the RIGHT/SELECT button while in this display Display Units Of Measure In selects English, Espanol, Deutsch, Italiano, Francais or To make your selection, push and release the RIGHT/ NL depending on availability. As you continue, the SELECT arrow button until “US”...
Page 239 UNDERSTANDING YOUR INSTRUMENT PANEL 237 and the transmission is in the PARK or NEUTRAL without the sound horn with lock feature selected. Push position (automatic transmission). Push and hold the and hold the SELECT button when in this display until SELECT button when in this display until “ON”...
Page 240 238 UNDERSTANDING YOUR INSTRUMENT PANEL Key Off Power Delay Hill Start Assist (HSA) — If Equipped When this feature is selected the power window When on is selected, the HSA system is active. Refer to switches, radio, Uconnect® phone, power sunroof, and “Electronic Brake Control System”...
Page 241 UNDERSTANDING YOUR INSTRUMENT PANEL 239 display “CAL” until the compass is calibrated. You may 2. Push and release the MENU button until the Personal also calibrate the compass by completing one or more Settings (Customer-Programmable Features) menu 360–degree turns (in an area free from large metal or displays in the EVIC.
Page 242 240 UNDERSTANDING YOUR INSTRUMENT PANEL the compass will automatically compensate for the differ- 1. Turn the ignition switch ON. ences and provide the most accurate compass heading. 2. Push and hold the COMPASS button for approxi- NOTE: Magnetic materials should be kept away from mately two seconds.
Page 243: Uconnect® 230 - Am/Fm Stereo Radio And 6-Disc Cd/Dvd Changer (Mp3/Wma Aux Jack)
UNDERSTANDING YOUR INSTRUMENT PANEL 241 Uconnect® 230 – AM/FM STEREO RADIO AND Operating Instructions — Radio Mode 6-DISC CD/DVD CHANGER (MP3/WMA AUX JACK) NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/Volume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio.
Page 244 242 UNDERSTANDING YOUR INSTRUMENT PANEL SEEK Buttons Voice Command Button Uconnect® Phone — If Equipped Push and release the SEEK buttons to search for the next listenable station in AM/FM mode. Push the right switch Push this button to operate the Uconnect® Phone feature to seek up and the left switch to seek down.
Page 245 UNDERSTANDING YOUR INSTRUMENT PANEL 243 TIME Button The clock can also be set by pushing the SETUP button and selecting the “SET HOME CLOCK” entry. Once in Push the TIME button to alternate locations of the time this display follow the above procedure, starting at and frequency display.
Page 246 244 UNDERSTANDING YOUR INSTRUMENT PANEL Setting The Tone, Balance And Fade Push the rotary TUNE/SCROLL control knob a fifth time and FADE will display. Turn the TUNE/SCROLL control Push the rotary TUNE/SCROLL control knob and BASS knob to the left or right to adjust the sound level between will display.
Page 247 UNDERSTANDING YOUR INSTRUMENT PANEL 245 Toggle the MUSIC TYPE button to select the following 16-Digit Character Program Type format types: Display Oldies Oldies 16-Digit Character Program Type Personality Persnlty Display Public Public No program type or None undefined Rhythm and Blues R &...
Page 248 246 UNDERSTANDING YOUR INSTRUMENT PANEL By pushing the SEEK button when the Music Type icon is • DVD Enter — When the disc is in DVD Menu mode, displayed, the radio will be tuned to the next frequency selecting DVD Enter will allow you to play the current station with the same selected Music Type name.
Page 249 UNDERSTANDING YOUR INSTRUMENT PANEL 247 • Angle — Repeatedly pressing SELECT will change • Set Home Clock — Pressing the SELECT button the viewing angle if supported by the DVD disc allows you to set the clock. Turn the TUNE/SCROLL (if equipped).
Page 250 248 UNDERSTANDING YOUR INSTRUMENT PANEL Audio Language — If Equipped Audio DRC — If Equipped Selecting this item allows you to choose a default audio Selecting this item allows you to limit maximum audio language (effective only if the language is supported by dynamic range.
Page 251 UNDERSTANDING YOUR INSTRUMENT PANEL 249 NOTE: The user will have to set these defaults before You may add a second station to each pushbutton by loading a disc. If changes are made to these settings after repeating the above procedure with this exception: Push a disc is loaded, changes will not be effective.
Page 252: Understanding Your Instrument Panel Operation Instructions - Disc Mode For Cd And Mp3/Wma Audio Play, Dvd - Video
250 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: The ignition switch must be in the ON or ACC Operation Instructions — DISC Mode For CD And position to operate the radio. MP3/WMA Audio Play, DVD – Video The radio DVD player and many DVD discs are coded by LOAD Button —...
Page 253 UNDERSTANDING YOUR INSTRUMENT PANEL 251 Eject Button — Ejecting Compact Disc(s) the current selection. Pushing and holding the SEEK button will allow you to scroll through the tracks faster in CD and MP3/MWA modes. Push the EJECT button and the pushbutton with the corresponding number (1-6) where the SCAN Button (CD MODE) CD was loaded and the disc will unload and...
Page 254 252 UNDERSTANDING YOUR INSTRUMENT PANEL AM Or FM Button (CD MODE) files properly and may be unable to play the file nor- mally. UDF and Apple HFS formats are not supported. Switches the radio into the AM or FM radio mode. The radio uses the following limits for file systems: Notes On Playing MP3/WMA Files •...
Page 255 UNDERSTANDING YOUR INSTRUMENT PANEL 253 discs. The use of multisession for CD audio or MP3/ MPEG Sampling Fre- Bit Rate (kbps) WMA playback may result in longer disc loading times. Specification quency (kHz) If a disc contains multi-formats, such as CD audio and MPEG-1 Audio 48, 44.1, 32 320, 256, 224,...
Page 256: List Button - Disc Mode For Mp3/Wma Play
254 UNDERSTANDING YOUR INSTRUMENT PANEL Playlist files are not supported. MP3 Pro files are not To increase the speed of disc loading, it is recommended supported. to use CD-R media and single-session discs. To create a single-session disc, enable the “Disc at Once” option Playback Of MP3/WMA Files before writing to the disc.
Page 257 UNDERSTANDING YOUR INSTRUMENT PANEL 255 Push the INFO button once more to return to elapsed is not loud enough, turn the device’s volume up. If the time priority mode. AUX audio sounds distorted, turn the device’s volume down. Push and hold the INFO button for three seconds or more and radio will display song titles for each file.
Page 258 256 UNDERSTANDING YOUR INSTRUMENT PANEL RW/FF (Auxiliary Mode) Dolby® No function. Manufactured under license from Dolby® Laboratories. Dolby® and the double-D symbol are trademarks of SET Button (Auxiliary Mode) Dolby® Laboratories. No function. Macrovision Operating Instructions (Voice Command System) — This product incorporates copyright protection technol- If Equipped ogy that is protected by U.S.
Page 259: Uconnect® (Satellite Radio) - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 257 information, call the toll-free number 888-539-7474, or Uconnect® (Satellite Radio) — If Equipped visit the Sirius web site at www.siriusxm.com, or at Satellite radio uses direct satellite-to-receiver broadcast- www.siriusxm.ca for Canadian residents. ing technology to provide clear digital sound, coast to coast.
Page 260 258 UNDERSTANDING YOUR INSTRUMENT PANEL selected. Push the TUNE/SCROLL control knob and the Reception Quality Sirius ID number will display. The Sirius ID number Satellite reception may be interrupted due to one of the display will time out in two minutes. Push any button on following reasons: the radio to exit this screen.
Page 261 UNDERSTANDING YOUR INSTRUMENT PANEL 259 SEEK Buttons additional three seconds will make the radio display the Song Title all of the time (push and hold again to return Push and release the SEEK buttons to search for the next to normal display). listenable station in AM/FM mode.
Page 262 260 UNDERSTANDING YOUR INSTRUMENT PANEL Toggle the MUSIC TYPE button again to select the music SET/RND Button — To Set The Pushbutton Memory type. When you are receiving a station that you wish to commit to pushbutton memory, push the SET/RND By pushing the SEEK button when the Music Type button.
Page 263: Uconnect® 730N/430/430N Cd/Dvd/
UNDERSTANDING YOUR INSTRUMENT PANEL 261 Every time a preset button is used, a corresponding Uconnect® 130 button number will display. Buttons 1 - 6 These buttons tune the radio to the channels that you commit to pushbutton memory (12 Satellite stations). Uconnect®...
Page 264: Operating Instructions - Radio Mode
262 UNDERSTANDING YOUR INSTRUMENT PANEL SEEK Buttons Operating Instructions — Radio Mode Push and release the SEEK buttons to search for the next NOTE: The ignition switch must be in the ON or ACC listenable station in AM/FM mode. Push the right switch position to operate the radio.
Page 265 UNDERSTANDING YOUR INSTRUMENT PANEL 263 3. After adjusting the hours, push the right side TUNE/ Setting The Tone, Balance And Fade SCROLL control knob to set the minutes. The minutes Push the rotary TUNE/SCROLL control knob and BASS will begin to blink. will display.
Page 266: Every Time A Preset Button Is Used, A Corresponding
264 UNDERSTANDING YOUR INSTRUMENT PANEL Push the rotary TUNE/SCROLL control knob a fifth time You may add a second station to each pushbutton by and FADE will display. Turn the TUNE/SCROLL control repeating the above procedure with this exception: Push knob to the left or right to adjust the sound level between the SET/RND button twice and SET 2 will show in the the front and rear speakers.
Page 267: Operation Instructions - Cd Mode For Cd And Mp3 Audio Play
UNDERSTANDING YOUR INSTRUMENT PANEL 265 If you insert a disc with the ignition ON and the radio Operation Instructions — CD MODE For CD And ON, the unit will switch from radio to CD mode and MP3 Audio Play begin to play when you insert the disc. The display will NOTE: show the track number, and index time in minutes and •...
Page 268 266 UNDERSTANDING YOUR INSTRUMENT PANEL SEEK Button CAUTION! (Continued) Push the right SEEK button for the next selection on the • Dual-media disc types (one side is a DVD, the CD. Push the left SEEK button to return to the beginning other side is a CD) should not be used, and they can of the current selection, or return to the beginning of the cause damage to the player.
Page 269: Notes On Playing Mp3 Files
UNDERSTANDING YOUR INSTRUMENT PANEL 267 AM/FM Button Supported Media (Disc Types) Push the button to select either AM or FM mode. The MP3 file recording media supported by the radio are CDDA, CD-R, CD-RW, MP3, and CDDA+MP3. SET/RND Button (Random Play Button) Supported Medium Formats (File Systems) Push this button while the CD is playing to activate Random Play.
Page 270 268 UNDERSTANDING YOUR INSTRUMENT PANEL display the file name and folder name, and will assign Supported MP3 File Formats a number instead. With a maximum number of files, The radio will recognize only files with the *.MP3 exten- exceeding 20 folders will result in this display. With sion as MP3 files.
Page 271 UNDERSTANDING YOUR INSTRUMENT PANEL 269 Playback Of MP3 Files MPEG Sampling Fre- Bit Rate (kbps) Specification quency (kHz) When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium MPEG-1 Audio 48, 44.1, 32 320, 256, 224, contains a lot of folders or files, the radio will take more Layer 3...
Page 272: Operation Instructions - Auxiliary Mode
270 UNDERSTANDING YOUR INSTRUMENT PANEL Operation Instructions — Auxiliary Mode Uconnect® 130 WITH SATELLITE RADIO The auxiliary (AUX) jack is an audio input jack, which allows the user to plug in a portable device, such as an MP3 player, or iPod®, and utilize the vehicle’s audio system to amplify the source and play through the vehicle speakers.
Page 273: Operating Instructions - Radio Mode
UNDERSTANDING YOUR INSTRUMENT PANEL 271 SEEK Buttons Operating Instructions — Radio Mode Push and release the SEEK buttons to search for the next NOTE: The ignition switch must be in the ON or ACC listenable station in AM/FM mode. Push the right switch position to operate the radio.
Page 274 272 UNDERSTANDING YOUR INSTRUMENT PANEL If your vehicle is not equipped with or this feature is not Clock Setting Procedure available on your vehicle, a “Not Equipped With 1. Push and hold the TIME button until the hours blink. Uconnect Phone” message will display on the radio screen.
Page 275 UNDERSTANDING YOUR INSTRUMENT PANEL 273 starting at step 2. For vehicles not equipped with satellite Setting The Tone, Balance And Fade radio, push the SETUP button and then follow the above Push the rotary TUNE/SCROLL control knob and BASS procedure, starting at step 2. will display.
Page 276 274 UNDERSTANDING YOUR INSTRUMENT PANEL Push the rotary TUNE/SCROLL control knob a fifth time Toggle the MUSIC TYPE button to select the following and FADE will display. Turn the TUNE/SCROLL control format types: knob to the left or right to adjust the sound level between 16-Digit Character the front and rear speakers.
Page 277 UNDERSTANDING YOUR INSTRUMENT PANEL 275 By pushing the SEEK button when the Music Type icon is 16-Digit Character Program Type displayed, the radio will be tuned to the next frequency Display station with the same selected Music Type name. The Oldies Oldies Music Type function only operates when in the FM mode.
Page 278 276 UNDERSTANDING YOUR INSTRUMENT PANEL AM/FM Button SET 2 in both AM and FM. This allows a total of 12 AM and 12 FM stations to be stored into pushbutton memory. Push the button to select either AM or FM mode. The stations stored in SET 2 memory can be selected by SET/RND Button —...
Page 279: Operation Instructions - Cd Mode For Cd And Mp3 Audio Play
UNDERSTANDING YOUR INSTRUMENT PANEL 277 If you insert a disc with the ignition ON and the radio Operation Instructions — CD MODE For CD And ON, the unit will switch from radio to CD mode and MP3 Audio Play begin to play when you insert the disc. The display will NOTE: show the track number, and index time in minutes and •...
Page 280 278 UNDERSTANDING YOUR INSTRUMENT PANEL SEEK Button CAUTION! (Continued) Push the right SEEK button for the next selection on the • Dual-media disc types (one side is a DVD, the CD. Push the left SEEK button to return to the beginning other side is a CD) should not be used, and they can of the current selection, or return to the beginning of the cause damage to the player.
Page 281: Notes On Playing Mp3 Files
UNDERSTANDING YOUR INSTRUMENT PANEL 279 AM/FM Button Supported Media (Disc Types) Push the button to select either AM or FM mode. The MP3 file recording media supported by the radio are CDDA, CD-R, CD-RW, MP3, and CDDA+MP3. SET/RND Button (Random Play Button) Supported Medium Formats (File Systems) Push this button while the CD is playing to activate Random Play.
Page 282 280 UNDERSTANDING YOUR INSTRUMENT PANEL display the file name and folder name, and will assign Supported MP3 File Formats a number instead. With a maximum number of files, The radio will recognize only files with the *.MP3 exten- exceeding 20 folders will result in this display. With sion as MP3 files.
Page 283 UNDERSTANDING YOUR INSTRUMENT PANEL 281 Playback Of MP3 Files MPEG Sampling Fre- Bit Rate (kbps) Specification quency (kHz) When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium MPEG-1 Audio 48, 44.1, 32 320, 256, 224, contains a lot of folders or files, the radio will take more Layer 3...
Page 284: List Button - Cd Mode For Mp3 Play
282 UNDERSTANDING YOUR INSTRUMENT PANEL Push and hold the INFO button for three seconds or more LIST Button — CD Mode For MP3 Play and the radio will display song titles for each file. Pushing the LIST button will bring up a list of all folders on the disc.
Page 285: Uconnect® (Satellite Radio) - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 283 TIME Button (Auxiliary Mode) service that is included with the factory-installed satellite radio system in your vehicle. Sirius will supply a wel- Push this button to change the display to time of day. come kit that contains general information, including The time of day will display for five seconds (when the how to setup your on-line listening account.
Page 286 284 UNDERSTANDING YOUR INSTRUMENT PANEL To access the ESN/SID, refer to the following steps: placed within the line of sight of the antenna will cause decreased performance. Larger luggage items such as ESN/SID Access bikes should be placed as far rearward as possible, within With the ignition switch in the ON/RUN or ACC posi- the loading design of the rack.
Page 287 UNDERSTANDING YOUR INSTRUMENT PANEL 285 Operating Instructions — Uconnect® (Satellite) Mode INFO Button Pushing the INFO button will cycle the display informa- NOTE: The ignition switch must be in the ON/RUN or tion between Artist, Song Title, and Composer (if avail- ACC position to operate the radio.
Page 288 286 UNDERSTANDING YOUR INSTRUMENT PANEL MUSIC TYPE Button SETUP Button Pushing this button once will turn on the Music Type Pushing the SETUP button allows you to select the mode for five seconds. Pushing the MUSIC TYPE button following items: or turning the TUNE/SCROLL control knob within five •...
Page 289: Ipod®/Usb/Mp3 Control - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 287 You may add a second channel to each pushbutton by iPod®/USB/MP3 CONTROL — IF EQUIPPED repeating the above procedure with this exception: Push This feature allows an iPod® or external USB device to be the SET button twice and SET 2 will show in the display plugged into the USB port, located in the center console window.
Page 290: Connecting The Ipod® Or External Usb Device
288 UNDERSTANDING YOUR INSTRUMENT PANEL Once the audio device is connected and synchronized to Connecting The iPod® Or External USB Device the vehicle’s iPod®/USB/MP3 control system (iPod® or Use the connection cable to connect an iPod® or external external USB device may take a few minutes to connect), USB device to the vehicle’s USB/AUX connector port the audio device starts charging and is ready for use by which is located in the center console or glove compart-...
Page 291: Controlling The Ipod® Or External Usb Device Using Radio Buttons
UNDERSTANDING YOUR INSTRUMENT PANEL 289 • The audio device can be controlled using the radio Play Mode buttons to Play, Browse, and List the iPod® contents. When switched to iPod®/USB/MP3 control mode, the iPod® or external USB device automatically starts Play •...
Page 292 290 UNDERSTANDING YOUR INSTRUMENT PANEL • Jump backward in the current track by pushing and for that track. Pushing the INFO button again jumps to holding the << RW button. Holding the << RW button the next screen of data for that track. Once all screens long enough will jump to the beginning of the current have been viewed, the last INFO button push will go track.
Page 293: List Or Browse Mode
UNDERSTANDING YOUR INSTRUMENT PANEL 291 • RND button (available on sales code RES radio only): • Turning it clockwise (forward) and counterclockwise Pushing this button toggles between Shuffle ON and (backward) scrolls through the lists, displaying the Shuffle OFF modes for the iPod® or external USB track detail on the radio display.
Page 294 292 UNDERSTANDING YOUR INSTRUMENT PANEL In List mode, the radio PRESET buttons are used as LIST button: The LIST button will display the top level shortcuts to the following lists on the iPod® or external menu of the iPod® or external USB device. USB device: •...
Page 295: Bluetooth® Streaming Audio (Btsa)
UNDERSTANDING YOUR INSTRUMENT PANEL 293 Controlling BTSA Using Radio Buttons CAUTION! (Continued) To enter BTSA mode, push either “AUX” button on the • Placing items on the iPod® or external USB device, radio or push the VR button and say “Bluetooth Streaming or connections to the iPod®...
Page 296: Steering Wheel Audio Controls
294 UNDERSTANDING YOUR INSTRUMENT PANEL Next Track STEERING WHEEL AUDIO CONTROLS Use the SEEK UP button, or push the VR button on the The remote sound system controls are located on the rear radio and say “Next Track,” to jump to the next music surface of the steering wheel.
Page 297: Radio Operation
UNDERSTANDING YOUR INSTRUMENT PANEL 295 The right-hand control is a rocker-type switch with a The button located in the center of the left-hand control pushbutton in the center and controls the volume and will tune to the next preset station that you have pro- mode of the sound system.
Page 298: Cd/Dvd Disc Maintenance
296 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: If you experience difficulty in playing a particular CD/DVD DISC MAINTENANCE disc, it may be damaged (e.g., scratched, reflective coat- To keep a CD/DVD in good condition, take the following ing removed, a hair, moisture or dew on the disc) precautions: oversized, or have protection encoding.
Page 299: Climate Controls
UNDERSTANDING YOUR INSTRUMENT PANEL 297 Blower Control CLIMATE CONTROLS The air conditioning and heating system is designed to Rotate this control to regulate the make you comfortable in all types of weather. amount of air forced through the ven- tilation system in any mode. The Manual Heating And Air Conditioning blower speed increases as you move the control to the right from the “O”...
Page 300 298 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: If your air conditioning performance seems lower • MAX A/C than expected, check the front of the A/C condenser For maximum cooling use the A/C and recirculation located in front of the radiator for an accumulation of dirt buttons at the same time.
Page 301 UNDERSTANDING YOUR INSTRUMENT PANEL 299 • Panel • Floor Air is directed through the outlets in the instru- Air is directed through the floor outlets with a ment panel. These outlets can be adjusted to direct small amount flowing through the defrost and airflow.
Page 302 300 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: NOTE: • The air conditioning compressor operates in Mix, • Continuous use of the Recirculation mode may make Defrost, or a blend of these modes, even if the Air the inside air stuffy and window fogging may occur. Conditioning (A/C) button is not pushed.
Page 303: Automatic Temperature Control (Atc) - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 301 Automatic Operation Automatic Temperature Control (ATC) — If Equipped Operation of the system is quite simple. The Automatic Temperature Control system automati- 1. Turn the Mode Control knob (right knob) and the cally maintains the climate in the cabin of the vehicle at Blower Control knob (left knob) to AUTO.
Page 304 302 UNDERSTANDING YOUR INSTRUMENT PANEL The recommended setting for maximum comfort for the Blower Control average person is 72°F (22°C); however, this may vary. For full automatic operation or for NOTE: automatic blower operation, turn the blower knob to the AUTO position. In •...
Page 305 UNDERSTANDING YOUR INSTRUMENT PANEL 303 I n f o r ma t i o n P r o v i d e d b y :...
Page 306 304 UNDERSTANDING YOUR INSTRUMENT PANEL The operator can override the AUTO mode setting to • Floor change airflow distribution by rotating the Mode Control Air is directed through the floor outlets with a knob (on the right) to one of the following positions. small amount flowing through the defrost and •...
Page 307 UNDERSTANDING YOUR INSTRUMENT PANEL 305 • Air Conditioner Control NOTE: Push this button to turn on the air • When the ignition switch is turned to the LOCK conditioning during manual operation position, the recirculation feature will be cancelled. only. When the air conditioning is •...
Page 308: Operating Tips
306 UNDERSTANDING YOUR INSTRUMENT PANEL • Most of the time, when in Automatic Operation, you Operating Tips can temporarily put the system into Recirculation NOTE: Refer to the chart at the end of this section for Mode by pushing the Recirculation button. However, suggested control settings for various weather condi- under certain conditions, while in Automatic Mode, tions.
Page 309 UNDERSTANDING YOUR INSTRUMENT PANEL 307 Winter Operation windshield and provide sufficient heating. If side win- dow fogging becomes a problem, increase blower speed. Use of the air Recirculation Mode during winter months is Vehicle windows tend to fog on the inside in mild but not recommended because it may cause window fogging.
Page 310 308 UNDERSTANDING YOUR INSTRUMENT PANEL Outside Air Intake A/C Air Filter — If Equipped Make sure the air intake, located directly in front of the The A/C Filter prevents most dust and pollen from windshield, is free of obstructions such as leaves. Leaves entering the cabin.
Page 311 UNDERSTANDING YOUR INSTRUMENT PANEL 309 Control Setting Suggestions For Various Weather Conditions I n f o r ma t i o n P r o v i d e d b y :...
Page 312 I n f o r ma t i o n P r o v i d e d b y :...
Page 313 STARTING AND OPERATING CONTENTS STARTING PROCEDURES ....316 ▫ Five-Speed Manual Transmission...319 ▫ Manual Transmission — If Equipped ..316 ▫...
Page 314 312 STARTING AND OPERATING AUTOSTICK® (SIX-SPEED AUTOMATIC ▫ After Driving Off-Road ....350 TRANSMISSION) ..... .337 POWER STEERING .
Page 315 STARTING AND OPERATING 313 ▫ ESC Activation/Malfunction Indicator Light ▫ Summer Or Three Season Tires — And ESC OFF Indicator Light ... .368 If Equipped......384 TIRE SAFETY INFORMATION .
Page 316 314 STARTING AND OPERATING TIRE ROTATION RECOMMENDATIONS ..392 ▫ Fuel System Cautions....406 TIRE PRESSURE MONITORING ▫ Carbon Monoxide Warnings ... . .407 SYSTEM (TPMS) .
Page 317 STARTING AND OPERATING 315 ▫ Towing Requirements ....418 RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) ... .425 ▫...
Page 318: Starting Procedures
316 STARTING AND OPERATING STARTING PROCEDURES WARNING! (Continued) Before starting your vehicle, adjust your seat, adjust both • Do not leave the Key Fob in or near the vehicle, or inside and outside mirrors, and fasten your seat belts. in a location accessible to children. A child could operate power windows, other controls, or move WARNING! the vehicle.
Page 319: Automatic Transmission - If Equipped
STARTING AND OPERATING 317 Automatic Transmission — If Equipped Normal Starting The shift lever must be in the PARK or NEUTRAL Normal starting of either a cold or a warm engine does position before you can start the engine. Depress the not require pumping or pressing the accelerator pedal.
Page 320: Extreme Cold Weather (Below -20°F Or −29°C)
318 STARTING AND OPERATING in the ON position, release the accelerator pedal and WARNING! (Continued) repeat the “Normal Starting” procedure. another vehicle. This type of start can be dangerous if done improperly, so follow the procedure carefully. WARNING! Refer to “Jump Starting” in “What To Do In Emer- Never pour fuel or other flammable liquid into the gencies”...
Page 321: Engine Block Heater - If Equipped
STARTING AND OPERATING 319 ENGINE BLOCK HEATER — IF EQUIPPED MANUAL TRANSMISSION — IF EQUIPPED The engine block heater warms the engine, and permits Five-Speed Manual Transmission quicker starts in cold weather. Connect the cord to a standard 110-115 Volt AC electrical outlet with a WARNING! grounded, three-wire extension cord.
Page 322 320 STARTING AND OPERATING CAUTION! • Launching in any gear except 1st gear will result in excessive slipping of the clutch and potentially lugging or stalling the engine. • Use each gear in numerical order, do not skip a gear. Be sure the transmission is in first gear, (not third), when starting from a standing position.
Page 323: Recommended Shift Speeds
STARTING AND OPERATING 321 Never shift into REVERSE until the vehicle has come to a Recommended Shift Speeds complete stop. To use your manual transmission for optimal fuel economy, it should be upshifted as listed in the following NOTE: During cold weather, until the transmission lubri- table.
Page 324: Downshifting
322 STARTING AND OPERATING Downshifting AUTOMATIC TRANSMISSION — IF EQUIPPED Proper downshifting will improve fuel economy and pro- CAUTION! long engine life. Damage to the transmission may occur if the follow- CAUTION! ing precautions are not observed: • Shift into or out of PARK or REVERSE only after If you skip a gear while downshifting or downshift the vehicle has come to a complete stop.
Page 325 STARTING AND OPERATING 323 WARNING! WARNING! (Continued) Once the key is removed, the transmission is • It is dangerous to shift out of PARK or NEUTRAL locked in PARK, securing the vehicle against un- if the engine speed is higher than idle speed. If wanted movement.
Page 326: Key Ignition Park Interlock
324 STARTING AND OPERATING out of PARK, the ignition switch must be turned to the Key Ignition Park Interlock ON/RUN position (engine running or not) and the brake This vehicle is equipped with a Key Ignition Park Inter- pedal must be pressed. lock which requires the transmission to be in PARK before the ignition switch can be turned to the LOCK/ Six-Speed Automatic Transmission —...
Page 327 STARTING AND OPERATING 325 Only shift from DRIVE to PARK or REVERSE when the PARK (P) accelerator pedal is released and the vehicle is stopped. This range supplements the parking brake by locking the Be sure to keep your foot on the brake pedal when transmission.
Page 328 326 STARTING AND OPERATING WARNING! WARNING! (Continued) hit someone or something. Only shift into gear • Never use the PARK position as a substitute for the when the engine is idling normally and your foot is parking brake. Always apply the parking brake firmly pressing the brake pedal.
Page 329 STARTING AND OPERATING 327 WARNING! (Continued) CAUTION! • Never leave children alone in a vehicle, or with • Before moving the shift lever out of PARK, you access to an unlocked vehicle. Allowing children to must turn the ignition switch from the LOCK/OFF be in a vehicle unattended is dangerous for a position to the ON/RUN position, and also press number of reasons.
Page 330 328 STARTING AND OPERATING The following indicators should be used to ensure that you NEUTRAL (N) have engaged the transmission into the PARK position: Use this range when the vehicle is standing for prolonged periods with the engine running. The engine may be •...
Page 331 STARTING AND OPERATING 329 while towing heavy trailers), use the AutoStick® shift CAUTION! (Continued) control (refer to “AutoStick® (Six-Speed Automatic severe transmission damage. Refer to “Recreational Transmission)” in this section for further information) to Towing” in “Starting And Operating” and “Towing A select a lower gear.
Page 332 330 STARTING AND OPERATING During very cold temperatures (-4°F [-20°C] or below), In the event of a momentary problem, the transmission transmission operation may be modified depending on can be reset to regain all forward gears by performing the engine and transmission temperature as well as vehicle following steps: speed.
Page 333 STARTING AND OPERATING 331 If the transmission cannot be reset, authorized dealer Torque Converter Clutch service is required. A feature designed to improve fuel economy has been included in the automatic transmission on your vehicle. Overdrive Operation A clutch within the torque converter engages automati- The automatic transmission includes an electronically cally at calibrated speeds.
Page 334: Continuously Variable Automatic Transmission (Cvt) - If Equipped
332 STARTING AND OPERATING The transmission shift lever has PARK, REVERSE, NEU- Continuously Variable Automatic Transmission TRAL, and DRIVE shift positions. Some models include a (CVT) — If Equipped LOW position (the LOW position manually downshifts The transmission gear position display (located in the the transmission to a lower available ratio based on instrument cluster) indicates the transmission gear range.
Page 335 STARTING AND OPERATING 333 PARK (P) WARNING! This range supplements the parking brake by locking the • Never use the PARK position as a substitute for the transmission. The engine can be started in this range. parking brake. Always apply the parking brake Never attempt to use PARK while the vehicle is in fully when parked to guard against vehicle move- motion.
Page 336 334 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) • Unintended movement of a vehicle could injure • Never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing children to those in or near the vehicle. As with all vehicles, be in a vehicle unattended is dangerous for a you should never exit a vehicle while the engine is number of reasons.
Page 337 STARTING AND OPERATING 335 • Look at the transmission gear position display and CAUTION! verify that it indicates the PARK position. • Before moving the shift lever out of PARK, you • With brake pedal released, verify that the shift lever must turn the ignition switch from the LOCK/OFF will not move out of PARK.
Page 338 336 STARTING AND OPERATING DRIVE (D) WARNING! This range should be used for most city and highway Do not coast in NEUTRAL and never turn off the driving. It provides the best fuel economy. The DRIVE ignition to coast down a hill. These are unsafe position provides optimum driving characteristics under practices that limit your response to changing traffic all normal operating conditions.
Page 339: Autostick
STARTING AND OPERATING 337 During sustained high speed driving or trailer AUTOSTICK® (SIX-SPEED AUTOMATIC towing up long grades on hot days, the auto- TRANSMISSION) matic transmission oil may become too hot. If AutoStick® is a driver-interactive transmission feature this happens, the transmission overheat indica- providing manual shift control, giving you more control tor light will come on, and the vehicle will slow slightly of the vehicle.
Page 340 338 STARTING AND OPERATING downshift the transmission to the next lower gear, while • The transmission will automatically downshift to first using (+) to enter AutoStick® mode will retain the gear when coming to a stop. After a stop, the driver current gear.
Page 341: Autostick® (Cvt)
STARTING AND OPERATING 339 To disengage AutoStick® mode, hold the shift lever to the and downshifts, and improve overall vehicle perfor- right (+) until “D” is once again displayed in the instru- mance. This system can also provide you with more ment cluster.
Page 342 340 STARTING AND OPERATING In AutoStick® mode, the transmission will shift up or • Transmission shifting will be more noticeable when down when (+/-) is manually selected by the driver, AutoStick® is engaged. unless an engine lugging or overspeed condition would •...
Page 343: Four-Wheel Drive Operation - If Equipped
STARTING AND OPERATING 341 Where one or more wheels have wheel spin or if addi- FOUR-WHEEL DRIVE OPERATION — tional traction is needed in sand, deep snow, or loose IF EQUIPPED traction surfaces, activate the “4WD LOCK” switch by This feature provides full time, on-demand, four–wheel pulling up once and releasing.
Page 344: On-Road Driving Tips
342 STARTING AND OPERATING ON-ROAD DRIVING TIPS OFF-ROAD DRIVING TIPS Utility vehicles have higher ground clearance and a You will encounter many types of terrain driving off- narrower track to make them capable of performing in a road. You should be familiar with the terrain and area wide variety of off-road applications.
Page 345: When To Use Low (L Off-Road) With The 4Wd Lock Lever Engaged
STARTING AND OPERATING 343 terrain. Due to the sustained lower gearing, low (L Off- CAUTION! Road) with 4WD LOCK engaged will allow the engine to operate in a higher power range. This will allow you to Never park your vehicle over dry grass or other cross over obstacles and descend hills, with improved combustible materials.
Page 346 344 STARTING AND OPERATING Snow In heavy snow or for additional control and traction at Deep mud creates a great deal of suction around the tires slower speeds, activate the 4WD LOCK and shift the and is very difficult to get through. You should use low transaxle to low (L Off-Road) if necessary.
Page 347: Hill Climbing
STARTING AND OPERATING 345 The key to driving in soft sand is using the appropriate CAUTION! (Continued) tire pressure, accelerating slowly, avoiding abrupt ma- unseating, while at a reduced tire pressure, reduce neuvers and maintaining the vehicle’s momentum. If you your speed and avoid sharp turns or abrupt maneu- are going to be driving on large soft sandy areas or vers.
Page 348 346 STARTING AND OPERATING What is on top and the other side? Are there ruts, rocks, slowly proceed over the top. If the wheels start to slip as branches or other obstacles on the path? Can you safely you approach the crest of a hill, ease off the accelerator recover the vehicle if something goes wrong? If every- and maintain headway by turning the steering wheel no thing looks good and you feel confident, then you should...
Page 349 STARTING AND OPERATING 347 Driving Down Hill Driving Across An Incline Before driving down a steep hill you need to determine if If at all possible avoid driving across an incline. If it is it is too steep for a safe descent. What is the surface necessary, know your vehicle’s abilities.
Page 350: Driving Through Water
348 STARTING AND OPERATING to REVERSE. Back slowly down the hill allowing engine Driving Through Water and hill descent braking to control the descent and apply Extreme care should be taken crossing any type of water. your brakes if necessary, but do not allow the tires to lock. Water crossings should be avoided if possible, and only be attempted when necessary in a safe responsible man- WARNING!
Page 351 STARTING AND OPERATING 349 bottom of the axle differentials, you should inspect all of be intruding on any wildlife, and you can recover the the vehicle fluids for signs of water ingestion. vehicle if necessary. The key to a safe crossing is the water depth, current and bottom conditions.
Page 352: After Driving Off-Road
350 STARTING AND OPERATING • Check threaded fasteners for looseness, particularly on CAUTION! the chassis, drivetrain components, steering, and sus- pension. Retighten them, if required, and torque to the Muddy waters can reduce the cooling system effec- values specified in the Service Manual. tiveness by depositing debris onto the radiator.
Page 353: Power Steering
STARTING AND OPERATING 351 If for some reason the power assist is interrupted, it will WARNING! (Continued) still be possible to steer your vehicle. Under these condi- not have full braking power when you need it to tions, you will observe a substantial increase in steering prevent a collision.
Page 354: Power Steering Fluid Check
352 STARTING AND OPERATING CAUTION! CAUTION! Prolonged operation of the steering system at the end Do not use chemical flushes in your power steering of the steering wheel travel will increase the steering system as the chemicals can damage your power fluid temperature and it should be avoided when steering components.
Page 355: Parking Brake
STARTING AND OPERATING 353 PARKING BRAKE Before leaving the vehicle, make sure that the parking brake is fully applied. Also, be certain to leave an automatic transmission in PARK, or manual transmission in REVERSE or first gear. The parking brake lever is located in the center console. To apply the parking brake, pull the lever up as firmly as possible.
Page 356 354 STARTING AND OPERATING NOTE: WARNING! • When the parking brake is applied and the automatic • When leaving the vehicle, always remove the Key transmission is placed in gear, the “Brake Warning Fob from the ignition and lock your vehicle. Light”...
Page 357: Brake System
STARTING AND OPERATING 355 BRAKE SYSTEM WARNING! (Continued) Your vehicle is equipped with power assisted brakes as • Always fully apply the parking brake when leav- standard equipment. In the event power assist is lost for ing your vehicle or it may roll and cause damage or any reason (for example, repeated brake applications injury.
Page 358: Electronic Brake Control System
356 STARTING AND OPERATING If either of the two hydraulic systems lose normal capa- ELECTRONIC BRAKE CONTROL SYSTEM bility, the remaining system will still function with some Your vehicle may be equipped with an optional ad- loss of overall braking effectiveness. This will be evident vanced electronic brake control system that includes by increased pedal travel during application and greater Anti-Lock Brake System (ABS), Traction Control System...
Page 359 STARTING AND OPERATING 357 WARNING! WARNING! (Continued) • The capabilities of an ABS-equipped vehicle must • Pumping of the anti-lock brakes will diminish never be exploited in a reckless or dangerous their effectiveness and may lead to a collision. manner which could jeopardize the user’s safety or Pumping makes the stopping distance longer.
Page 360 358 STARTING AND OPERATING If the “ABS Warning Light” is on, the brake system ABS is activated during braking under certain road or should be serviced as soon as possible to restore the stopping conditions. ABS-inducing conditions can in- benefits of anti-lock brakes. If the “ABS Warning Light” clude ice, snow, gravel, bumps, railroad tracks, loose does not come on when the ignition switch is turned to debris, or panic stops.
Page 361: Traction Control System (Tcs)
STARTING AND OPERATING 359 a limited slip differential and controls the wheel spin WARNING! across a driven axle. If one wheel on a driven axle is The Anti-Lock Brake System (ABS) contains sophis- spinning faster than the other, the system will apply the ticated electronic equipment that may be susceptible brake of the spinning wheel.
Page 362: Electronic Roll Mitigation (Erm)
360 STARTING AND OPERATING benefit of the system, you must apply continuous brak- Electronic Roll Mitigation (ERM) ing pressure during the stopping sequence (do not This system anticipates the potential for wheel lift by “pump” the brakes). Do not reduce brake pedal pressure monitoring the driver’s steering wheel input and the unless braking is no longer desired.
Page 363: Hill Descent Control (Hdc) - If Equipped
STARTING AND OPERATING 361 NOTE: Anytime the ESC system is in the “Full Off” Hill Descent Control (HDC) — If Equipped mode, ERM is disabled. Refer to “Electronic Stability This system maintains vehicle speed while descending Control (ESC)” in this section for a complete explanation hills during off-road driving situations.
Page 364: Hill Start Assist (Hsa)
362 STARTING AND OPERATING mode. This is done by pressing and holding the “ESC WARNING! Off” button for five seconds. Refer to “Electronic Stability Control (ESC)” in this section of the manual. HDC is only intended to assist the driver in control- ling vehicle speed when descending hills.
Page 365 STARTING AND OPERATING 363 HSA Activation Criteria Disabling/Enabling HSA The following criteria must be met in order for HSA to If you wish to turn on or off the HSA system, it can be activate: done using the Customer Programmable Features in the Electronic Vehicle Information Center (EVIC).
Page 366: Electronic Stability Control (Esc)
364 STARTING AND OPERATING 5. Release the clutch pedal (if equipped). Electronic Stability Control (ESC) This system enhances directional control and stability of 6. Rotate the steering wheel one-half turn to the left. the vehicle under various driving conditions. ESC cor- 7.
Page 367 STARTING AND OPERATING 365 ESC Operating Modes WARNING! The ESC system has three available operating modes for • The Electronic Stability Control (ESC) cannot pre- four–wheel drive equipped vehicles and two available vent the natural laws of physics from acting on the operating modes for two–wheel drive equipped vehicles.
Page 368 366 STARTING AND OPERATING the TCS section, has been disabled and the ESC OFF WARNING! Indicator Light will be illuminated. All other stability features of ESC function normally. This mode is intended When in “Partial Off” mode, the TCS functionality of to be used if the vehicle is in deep snow, sand or gravel ESC (except for the limited slip feature described in conditions and more wheel spin than ESC would nor-...
Page 369 STARTING AND OPERATING 367 seconds when the vehicle is stopped and the engine is To turn ESC on again, momentarily press the “ESC Off” running. After five seconds, the ESC OFF Indicator switch. This will restore the “ESC On” mode of operation. Light will illuminate and the “ESC OFF”...
Page 370: Esc Activation/Malfunction Indicator Light And Esc Off Indicator Light
368 STARTING AND OPERATING The “ESC Activation/Malfunction Indicator Light” (lo- ESC Activation/Malfunction Indicator Light And cated in the instrument cluster) starts to flash as soon as ESC OFF Indicator Light the tires lose traction and the ESC system becomes active. The “ESC Activation/Malfunction Indicator Light”...
Page 371: Tire Safety Information
STARTING AND OPERATING 369 • Each time the ignition is cycled to the ON/RUN TIRE SAFETY INFORMATION position, the ESC system will be ON even if it was Tire Markings cycled off previously, except for when the vehicle is started while in 4L Range. •...
Page 372 370 STARTING AND OPERATING NOTE: • LT (Light Truck) — Metric tire sizing is based on U.S. design standards. The size designation for LT-Metric • P (Passenger) — Metric tire sizing is based on U.S. tires is the same as for P-Metric tires except for the design standards.
Page 373 STARTING AND OPERATING 371 Tire Sizing Chart EXAMPLE: Example Size Designation: P215/65R15XL 95H, 215/65R15 96H, LT235/85R16C, T145/80D18 103M, 31x10.5 R15 LT P = Passenger car tire size based on U.S. design standards, or ..blank..= Passenger car tire based on European design standards, or LT = Light truck tire based on U.S.
Page 374 372 STARTING AND OPERATING EXAMPLE: Service Description: 95 = Load Index – A numerical code associated with the maximum load a tire can carry H = Speed Symbol – A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions –...
Page 375: Tire Identification Number (Tin)
STARTING AND OPERATING 373 Look for the TIN on the outboard side of black sidewall Tire Identification Number (TIN) tires as mounted on the vehicle. If the TIN is not found on The TIN may be found on one or both sides of the tire, the outboard side, then you will find it on the inboard however, the date code may only be on one side.
Page 376: Tire Terminology And Definitions
374 STARTING AND OPERATING EXAMPLE: DOT MA L9 ABCD 0301 01 = Number representing the year in which the tire was manufactured (two digits) – 01 means the year 2001 – Prior to July 2000, tire manufacturers were only required to have one number to represent the year in which the tire was manufactured.
Page 377: Tire Loading And Tire Pressure
STARTING AND OPERATING 375 Term Definition Recommended Cold Tire Vehicle manufacturer’s recommended cold tire inflation pressure as shown on the Inflation Pressure tire placard. Tire Placard A label permanently attached to the vehicle describing the vehicle’s loading capacity, the original equipment tire sizes and the recommended cold tire inflation pressures. Tire Loading And Tire Pressure Tire And Loading Information Placard Location NOTE: The proper cold tire inflation pressure is listed on...
Page 378 376 STARTING AND OPERATING Tire And Loading Information Placard Example Tire Placard Location (B-Pillar) Tire And Loading Information Placard This placard tells you important information about the: 1. Number of people that can be carried in the vehicle. 2. Total weight your vehicle can carry. I n f o r ma t i o n P r o v i d e d b y :...
Page 379 STARTING AND OPERATING 377 3. Tire size designed for your vehicle. To determine the maximum loading conditions of your vehicle, locate the statement “The combined weight of 4. Cold tire inflation pressures for the front, rear, and occupants and cargo should never exceed XXX lbs or spare tires.
Page 380 378 STARTING AND OPERATING 4. The resulting figure equals the available amount of NOTE: cargo and luggage load capacity. For example, if • If your vehicle will be towing a trailer, load from your “XXX” amount equals 1,400 lbs (635 kg) and there will trailer will be transferred to your vehicle.
Page 381 STARTING AND OPERATING 379 I n f o r ma t i o n P r o v i d e d b y :...
Page 382: Tires - General Information
380 STARTING AND OPERATING Safety WARNING! Overloading of your tires is dangerous. Overloading WARNING! can cause tire failure, affect vehicle handling, and • Improperly inflated tires are dangerous and can increase your stopping distance. Use tires of the cause collisions. recommended load capacity for your vehicle.
Page 383: Tire Inflation Pressures
STARTING AND OPERATING 381 Economy WARNING! (Continued) Under-inflated tires will increase tire rolling resistance • Unequal tire pressures from one side of the vehicle resulting in higher fuel consumption. to the other can cause the vehicle to drift to the right or left.
Page 384: Tire Pressures For High Speed Operation
382 STARTING AND OPERATING Tire pressures change by approximately 1 psi (7 kPa) per CAUTION! 12°F (7°C) of air temperature change. Keep this in mind when checking tire pressure inside a garage, especially in After inspecting or adjusting the tire pressure, al- the winter.
Page 385: Radial Ply Tires
STARTING AND OPERATING 383 speeds, maintaining correct tire inflation pressure is very Radial Ply Tires important. Increased tire pressure and reduced vehicle loading may be required for high-speed vehicle opera- WARNING! tion. Refer to your authorized tire dealer or original Combining radial ply tires with other types of tires equipment vehicle dealer for recommended safe operat- on your vehicle will cause your vehicle to handle...
Page 386: All Season Tires - If Equipped
384 STARTING AND OPERATING Consult an authorized tire dealer for tire repairs and on ice. If your vehicle is equipped with summer tires, be additional information. aware these tires are not designed for winter or cold driving conditions. Install winter tires on your vehicle Damaged Run Flat tires, or Run Flat tires that have when ambient temperatures are less than 40°F (5°C) or if experienced a loss of pressure should be replaced imme-...
Page 387: Snow Tires
STARTING AND OPERATING 385 While studded tires improve performance on ice, skid Snow Tires and traction capability on wet or dry surfaces may be Some areas of the country require the use of snow tires poorer than that of non-studded tires. Some states pro- during the winter.
Page 388: Compact Spare Tire - If Equipped
386 STARTING AND OPERATING Compact Spare Tire — If Equipped WARNING! The compact spare is for temporary emergency use only. Compact spares are for temporary emergency use You can identify if your vehicle is equipped with a only. With these spares, do not drive more than compact spare by looking at the spare tire description on 50 mph (80 km/h).
Page 389: Limited-Use Spare - If Equipped
STARTING AND OPERATING 387 spare tire needs to be replaced. Since it is not the same as WARNING! your original equipment tire, replace (or repair) the original equipment tire and reinstall on the vehicle at the Limited-use spares are for emergency use only. In- first opportunity.
Page 390: Tire Spinning
388 STARTING AND OPERATING Tire Spinning Tread Wear Indicators When stuck in mud, sand, snow, or ice conditions, do not Tread wear indicators are in the original equipment tires spin your vehicle’s wheels above 30 mph (48 km/h) or to help you in determining when your tires should be for longer than 30 seconds continuously without stop- replaced.
Page 391: Life Of Tire
STARTING AND OPERATING 389 These indicators are molded into the bottom of the tread • Performance tires, tires with a speed rating of V or grooves. They will appear as bands when the tread depth higher, and summer tires typically have a reduced becomes 1/16”...
Page 392: Replacement Tires
390 STARTING AND OPERATING affect your vehicle’s handling. If you ever replace a Replacement Tires wheel, make sure that the wheel’s specifications match The tires on your new vehicle provide a balance of many those of the original wheels. characteristics. They should be inspected regularly for wear and correct cold tire inflation pressures.
Page 393: Tire Chains (Traction Devices)
STARTING AND OPERATING 391 WARNING! (Continued) CAUTION! braking of your vehicle. This can cause unpredict- Replacing original tires with tires of a different size able handling and stress to steering and suspen- may result in false speedometer and odometer read- sion components.
Page 394: Starting And Operating Tire Rotation Recommendations
392 STARTING AND OPERATING The suggested rotation method is the “rearward cross” TIRE ROTATION RECOMMENDATIONS shown in the following diagram. This rotation pattern The tires on the front and rear of your vehicle operate at does not apply to some directional tires that must not be different loads and perform different steering, driving, reversed.
Page 395: Tire Pressure Monitoring System (Tpms)
STARTING AND OPERATING 393 The TPMS will warn the driver of a low tire pressure if TIRE PRESSURE MONITORING SYSTEM (TPMS) the tire pressure falls below the low-pressure warning The Tire Pressure Monitor System (TPMS) will warn the limit for any reason, including low temperature effects, or driver of a low tire pressure based on the vehicle recom- natural pressure loss through the tire.
Page 396 394 STARTING AND OPERATING For example, your vehicle may have a recommended CAUTION! cold (parked for more than three hours) placard pressure of 30 psi (207 kPa). If the ambient temperature is 68°F • The TPMS has been optimized for the original (20°C) and the measured tire pressure is 27 psi (186 kPa), equipment tires and wheels.
Page 397 STARTING AND OPERATING 395 • Driving on a significantly under-inflated tire causes CAUTION! (Continued) the tire to overheat and can lead to tire failure. • After inspecting or adjusting the tire pressure, Under-inflation also reduces fuel efficiency and tire always reinstall the valve stem cap. This will tread life, and may affect the vehicle’s handling and prevent moisture and dirt from entering the valve stopping ability.
Page 398: Base System
396 STARTING AND OPERATING Tire Pressure Monitoring Low Pressure Warnings Base System This is the TPMS warning indicator located in the The Tire Pressure Monitoring Telltale Light will illumi- instrument cluster. nate in the instrument cluster, a LOW TIRE message will be displayed for a minimum of five seconds, and an The TPMS uses wireless technology with wheel rim audible chime will be activated when one or more of the...
Page 399 STARTING AND OPERATING 397 Check TPMS Warnings 5. Using wheels/tires not equipped with TPM sensors. The Tire Pressure Monitoring Telltale Light will flash on NOTE: Your vehicle is equipped with a compact spare and off for 75 seconds and remain on solid when a system wheel and tire assembly.
Page 400: Premium System - If Equipped
398 STARTING AND OPERATING 4. For each subsequent ignition key cycle, a chime will Premium System — If Equipped sound and the Tire Pressure Monitoring Telltale Light The TPMS uses wireless technology with wheel rim will flash on and off for 75 seconds and then remain on mounted electronic sensors to monitor tire pressure lev- solid.
Page 401 STARTING AND OPERATING 399 • Various Tire Pressure Monitoring System Messages, which display in the Electronic Vehicle Information Center (EVIC) • Tire Pressure Monitoring Telltale Light Tire Pressure Monitoring Low Pressure Warnings The Tire Pressure Monitoring Telltale Light will illumi- nate in the instrument cluster and an audible chime will be activated when one or more of the four active road tire pressures are low.
Page 402 400 STARTING AND OPERATING the graphic display of the pressure value(s) will stop flashing, and the Tire Pressure Monitoring Light will extinguish once the updated tire pressure(s) have been received. The vehicle may need to be driven for up to 20 minutes above 15 mph (24 km/h) to receive this information.
Page 403 STARTING AND OPERATING 401 will be displayed instead of dashes. A system fault can pressure values still shown. This indicates that the pres- occur with any of the following scenarios: sure values are still being received from the TPM sensors but they may not be located in the correct vehicle 1.
Page 404: General Information
402 STARTING AND OPERATING 3. However, after driving the vehicle for up to 20 min- warning limit in any of the four active road tires. The utes above 15 mph (24 km/h), the Tire Pressure vehicle may need to be driven for up to 20 minutes Monitoring Telltale Light will flash on and off for above 15 mph (24 km/h) in order for the TPMS to 75 seconds and then remain on solid.
Page 405: Fuel Requirements
STARTING AND OPERATING 403 Over 40 auto manufacturers worldwide have issued and FUEL REQUIREMENTS endorsed consistent gasoline specifications (the World- 2.0L And 2.4L Engine wide Fuel Charter, WWFC) which define fuel properties necessary to deliver enhanced emissions, performance, This engine is designed to meet all emis- and durability for your vehicle.
Page 406: Gasoline/Oxygenate Blends
404 STARTING AND OPERATING Gasoline/Oxygenate Blends E-85 Usage In Non-Flex Fuel Vehicles Some fuel suppliers blend unleaded gasoline with oxy- Non-Flex Fuel Vehicles (FFV) are compatible with gaso- genates such as Ethanol. line containing 10% ethanol (E10). Gasoline with higher ethanol content may void the New Vehicle Limited CAUTION! Warranty.
Page 407: Mmt In Gasoline
STARTING AND OPERATING 405 To fix a Non-FFV vehicle inadvertently fueled once with MMT. Gasoline blended with MMT reduces spark plug E-85 perform the following: life and reduces emissions system performance in some vehicles. The manufacturer recommends that gasoline • Drain the fuel tank (see your authorized dealer). without MMT be used in your vehicle.
Page 408: Fuel System Cautions
406 STARTING AND OPERATING Fuel System Cautions CAUTION! (Continued) • The use of fuel additives, which are now being CAUTION! sold as octane enhancers, is not recommended. Follow these guidelines to maintain your vehicle’s Most of these products contain high concentrations performance: of methanol.
Page 409: Carbon Monoxide Warnings
STARTING AND OPERATING 407 Carbon Monoxide Warnings WARNING! (Continued) • Guard against carbon monoxide with proper main- WARNING! tenance. Have the exhaust system inspected every Carbon monoxide (CO) in exhaust gases is deadly. time the vehicle is raised. Have any abnormal Follow the precautions below to prevent carbon conditions repaired promptly.
Page 410 408 STARTING AND OPERATING CAUTION! • Damage to the fuel system or emission control system could result from using an improper fuel tank filler cap (gas cap). A poorly fitting cap could let impurities into the fuel system. • A poorly fitting gas cap may cause the “Malfunc- tion Indicator Light (MIL)”...
Page 411: Loose Fuel Filler Cap Message
STARTING AND OPERATING 409 • If the gas cap is not tightened properly, the MIL will WARNING! (Continued) come on. Be sure the gas cap is tightened every time • Never add fuel when the engine is running. This is the vehicle is refueled.
Page 412: Vehicle Loading
410 STARTING AND OPERATING The bar code allows a computer scanner to read the VEHICLE LOADING Vehicle Identification Number (VIN). As required by National Highway Traffic Safety Admin- istration regulations, your vehicle has a certification label Gross Vehicle Weight Rating (GVWR) affixed to the driver’s side door or B-Pillar.
Page 413 STARTING AND OPERATING 411 Inflation Pressure The best way to figure out the total weight of your vehicle is to weigh it when it is fully loaded and ready for This is the cold tire inflation pressure for your vehicle for operation.
Page 414: Trailer Towing
412 STARTING AND OPERATING Common Towing Definitions CAUTION! The following trailer towing related definitions will assist Do not load your vehicle any heavier than the you in understanding the following information: GVWR. If you do, parts on your vehicle can break, or Gross Vehicle Weight Rating (GVWR) it can change the way your vehicle handles.
Page 415 STARTING AND OPERATING 413 measure GTW is to put your fully loaded trailer on a WARNING! vehicle scale. The entire weight of the trailer must be supported by the scale. It is important that you do not exceed the maximum front or rear GAWR.
Page 416 414 STARTING AND OPERATING Trailer Sway Control in accordance with the manufacturer’s directions, it pro- vides for a more level ride, offering more consistent The trailer sway control is a telescoping link that can be steering and brake control thereby enhancing towing installed between the hitch receiver and the trailer tongue safety.
Page 417: Trailer Hitch Classification
STARTING AND OPERATING 415 Trailer Hitch Classification Definitions WARNING! (Continued) Class Max. Trailer Hitch • Weight Distributing Systems may not be compatible Industry Standards with Surge Brake Couplers. Consult with your hitch Class I - Light Duty 2,000 lbs (907 kg) and trailer manufacturer or a reputable Recreational Vehicle dealer for additional information.
Page 418: Trailer Towing Weights (Maximum Trailer Weight Ratings)
416 STARTING AND OPERATING Trailer Towing Weights (Maximum Trailer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Maximum GTW Maximum Tongue Wt. Engine/Transmission Frontal Area (Gross Trailer Wt.) (See Note) 2.0L Auto/Man 22 sq ft (2.04 sq m) 1,000 lbs (450 kg) 150 lbs (68 kg)
Page 419: Trailer And Tongue Weight
STARTING AND OPERATING 417 NOTE: The trailer tongue weight must be considered as part of the combined weight of occupants and cargo, and should never exceed the weight referenced on the Tire and Loading Information placard. Refer to “Tire Safety Information”...
Page 420: Towing Requirements
418 STARTING AND OPERATING NOTE: Remember that everything put into or on the CAUTION! (Continued) trailer adds to the load on your vehicle. Also, additional • Then, during the first 500 miles (805 km) that a factory-installed options or dealer-installed options must trailer is towed, do not drive over 50 mph (80 km/h) be considered as part of the total load on your vehicle.
Page 421 STARTING AND OPERATING 419 WARNING! WARNING! (Continued) • Safety chains must always be used between your Improper towing can lead to a collision. Follow these vehicle and trailer. Always connect the chains to guidelines to make your trailer towing as safe as the frame or hook retainers of the vehicle hitch.
Page 422 420 STARTING AND OPERATING • Proper tire inflation pressures are essential to the safe WARNING! (Continued) and satisfactory operation of your vehicle. Refer to • Total weight must be distributed between the tow “Tires – General Information” in “Starting And Oper- vehicle and the trailer such that the following four ating”...
Page 423 STARTING AND OPERATING 421 Towing Requirements — Trailer Brakes WARNING! • Do not interconnect the hydraulic brake system or • Do not connect trailer brakes to your vehicle’s hy- vacuum system of your vehicle with that of the trailer. draulic brake lines. It can overload your brake sys- This could cause inadequate braking and possible tem and cause it to fail.
Page 424 422 STARTING AND OPERATING Towing Requirements — Trailer Lights And Wiring Whenever you pull a trailer, regardless of the trailer size, stoplights and turn signals on the trailer are required for motoring safety. The Trailer Tow Package may include a four- and seven- pin wiring harness.
Page 425: Towing Tips
STARTING AND OPERATING 423 Towing Tips Before setting out on a trip, practice turning, stopping, and backing up the trailer in an area located away from heavy traffic. Manual Transmission — If Equipped If using a manual transmission vehicle for trailer towing, all starts must be in first gear to avoid excessive clutch slippage.
Page 426 424 STARTING AND OPERATING excessive shifting and heat buildup. This action will also Electronic Speed Control — If Equipped provide better engine braking. • Do not use in hilly terrain or with heavy loads. If you REGULARLY tow a trailer for more than 45 min- •...
Page 427: Recreational Towing (Behind Motorhome, Etc.)
STARTING AND OPERATING 425 RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) Towing This Vehicle Behind Another Vehicle Towing Condition Wheels OFF the Ground Manual Transmission Automatic Transmission Flat Tow None • Transmission in NEUTRAL NOT ALLOWED • Key in ACC Position Dolly Tow Front OK (FWD Only) OK (FWD Only)
Page 428 I n f o r ma t i o n P r o v i d e d b y :...
Page 429: What To Do In Emergencies
WHAT TO DO IN EMERGENCIES CONTENTS HAZARD WARNING FLASHERS ...429 ▫ Road Tire Installation ....440 IF YOUR ENGINE OVERHEATS .
Page 430 428 WHAT TO DO IN EMERGENCIES FREEING A STUCK VEHICLE ... . .457 TOWING A DISABLED VEHICLE ...460 SHIFT LEVER OVERRIDE ....458 ▫...
Page 431: Hazard Warning Flashers
WHAT TO DO IN EMERGENCIES 429 HAZARD WARNING FLASHERS IF YOUR ENGINE OVERHEATS The Hazard Warning flasher switch is located on the In any of the following situations, you can reduce the instrument panel below the climate controls. potential for overheating by taking the appropriate action. •...
Page 432: Wheel And Tire Torque Specifications
430 WHAT TO DO IN EMERGENCIES WHEEL AND TIRE TORQUE SPECIFICATIONS CAUTION! Proper lug nut/bolt torque is very important to ensure Driving with a hot cooling system could damage your that the wheel is properly mounted to the vehicle. Any vehicle.
Page 433 WHAT TO DO IN EMERGENCIES 431 Inspect the wheel mounting surface prior to mounting the tire and remove any corrosion or loose particles. Torque Patterns After 25 miles (40 km) check the lug nut/bolt torque to be sure that all the lug nuts/bolts are properly seated Wheel Mounting Surface against the wheel.
Page 434: Jacking And Tire Changing
432 WHAT TO DO IN EMERGENCIES WARNING! WARNING! (Continued) • Being under a jacked-up vehicle is dangerous. The To avoid the risk of forcing the vehicle off the jack, vehicle could slip off the jack and fall on you. You do not tighten the lug nuts fully until the vehicle has could be crushed.
Page 435: Jack Location
WHAT TO DO IN EMERGENCIES 433 Jack Location Spare Tire Stowage The jack and jack-handle are stowed under the load floor The compact spare tire is stowed under the rear load floor in the cargo area. in the cargo area. Spare Tire Removal Lift up the load floor cover and remove the hold down.
Page 436: Jacking Instructions
434 WHAT TO DO IN EMERGENCIES 3. Set the parking brake. Jacking Instructions 4. Place the shift lever in PARK (automatic transmission) WARNING! or REVERSE (manual transmission). Carefully follow these tire changing warnings to help 5. Turn OFF the ignition. prevent personal injury or damage to your vehicle: 6.
Page 437 WHAT TO DO IN EMERGENCIES 435 WARNING! (Continued) • Do not let anyone sit in the vehicle when it is on a jack. • Do not get under the vehicle when it is on a jack. If you need to get under a raised vehicle, take it to Jack Warning Label a service center where it can be raised on a lift.
Page 438 436 WHAT TO DO IN EMERGENCIES NOTE: Refer to “Tires — General Information” in “Start- ing And Operating” for further information about the spare tire, it’s use, and operation. 1. Remove the scissors jack and lug wrench from the spare wheel as an assembly. Turn the jack screw to the left to loosen the lug wrench and remove the wrench from the jack assembly.
Page 439 WHAT TO DO IN EMERGENCIES 437 assembly. The rear location is the same but with two CAUTION! rectangular cutouts. For vehicles equipped with plastic trim, the plastic has been cut away to expose the jacking Do not attempt to raise the vehicle by jacking on locations in the body.
Page 440 438 WHAT TO DO IN EMERGENCIES WARNING! Raising the vehicle higher than necessary can make the vehicle less stable. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire. 4. Using the swivel wrench raise the vehicle by turning the jack screw to the right.
Page 441 WHAT TO DO IN EMERGENCIES 439 WARNING! CAUTION! Be sure to mount the spare tire with the valve stem To avoid the risk of forcing the vehicle off the jack, facing outward. The vehicle could be damaged if the do not tighten the wheel nuts fully until the vehicle spare tire is mounted incorrectly.
Page 442: Road Tire Installation
440 WHAT TO DO IN EMERGENCIES 7. Finish tightening the lug nuts. Push down on the WARNING! wrench while at the end of the handle for increased A loose tire thrown forward in a collision or hard stop leverage. Tighten the lug nuts in a star pattern until each could injure the occupants in the vehicle.
Page 443 WHAT TO DO IN EMERGENCIES 441 WARNING! To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury. 4.
Page 444: Tire Service Kit - If Equipped
442 WHAT TO DO IN EMERGENCIES Vehicles Without Wheel Covers 5. After 25 miles (40 km) check the lug nut torque with a torque wrench to ensure that all lug nuts are properly 1. Mount the road tire on the axle. seated against the wheel.
Page 445: Tire Service Kit Components And Operation
WHAT TO DO IN EMERGENCIES 443 Using The Mode Select Knob And Hoses Tire Service Kit Components And Operation Your Tire Service Kit is equipped with the following symbols to indicate the air or sealant mode. Selecting Air Mode Push in the Mode Select Knob (5) and turn to this position for air pump operation only.
Page 446: Tire Service Kit Usage Precautions
444 WHAT TO DO IN EMERGENCIES Using The Power Button Push and release the Power Button (4) once to turn On the Tire Service Kit. Push and release the Power Button (4) again to turn Off the Tire Service Kit. Using The Deflation Button Press the Deflation Button (2) to reduce the air pressure in the tire if it becomes over-inflated.
Page 447 WHAT TO DO IN EMERGENCIES 445 from the vehicle or tire and wheel components. Once WARNING! the sealant dries, it can easily be peeled off and properly discarded. • Do not attempt to seal a tire on the side of the vehicle closest to traffic.
Page 448: Sealing A Tire With Tire Service Kit
446 WHAT TO DO IN EMERGENCIES WARNING! (Continued) WARNING! (Continued) • Keep Tire Service Kit away from open flames or • Tire Service Kit Sealant solution contains latex. In heat source. case of an allergic reaction or rash, consult a phy- •...
Page 449 WHAT TO DO IN EMERGENCIES 447 on the ground. This will provide the best positioning 4. Remove the cap from the valve stem and then screw of the kit when injecting the sealant into the deflated the fitting at the end of the Sealant Hose (6) onto the tire and running the air pump.
Page 450 448 WHAT TO DO IN EMERGENCIES NOTE: Sealant may leak out through the puncture in the NOTE: If the Mode Select Knob (5) is on Air Mode and tire. the pump is operating, air will dispense from the Air Pump Hose (7) only, not the Sealant Hose (6). If the sealant (white fluid) does not flow within 0 –...
Page 451 WHAT TO DO IN EMERGENCIES 449 If the tire does not inflate to at least 26 psi (1.8 Bar) 3. Immediately disconnect the Sealant Hose (6) from the pressure within 15 minutes: valve stem, reinstall the cap on the fitting at the end of the hose, and place the Tire Service Kit in the vehicle •...
Page 452 450 WHAT TO DO IN EMERGENCIES (D) Drive Vehicle: (E) After Driving: Immediately after injecting sealant and inflating the tire, Pull over to a safe location. Refer to “Whenever You Stop drive the vehicle 5 miles (8 km) or 10 minutes to ensure to Use Tire Service Kit”...
Page 453 WHAT TO DO IN EMERGENCIES 451 If the tire pressure is 19 psi (1.3 Bar) or higher: 5. Remove the Speed Limit sticker from the instrument panel after the tire has been repaired. 1. Press the Power Button (4) to turn on Tire Service Kit and inflate the tire to the pressure indicated on the tire 6.
Page 454: Jump-Starting Procedures
452 WHAT TO DO IN EMERGENCIES 4. Clean any remaining sealant from the Tire Service Kit pack. Jump-starting can be dangerous if done improperly housing. so please follow the procedures in this section carefully. 5. Position the new Sealant Bottle (1) in the housing so NOTE: When using a portable battery booster pack that the Sealant Hose (6) aligns with the hose slot in follow the manufacturer’s operating instructions and...
Page 455: Preparations For Jump-Start
WHAT TO DO IN EMERGENCIES 453 Preparations For Jump-Start The battery in your vehicle is located in the front of the engine compartment below the air intake duct. To access the battery remove the air intake duct by turning the two finger screws, located on the radiator support.
Page 456: Jump-Starting Procedure
454 WHAT TO DO IN EMERGENCIES 3. If using another vehicle to jump-start the battery, park WARNING! the vehicle within the jumper cables reach, set the • Take care to avoid the radiator cooling fan when- parking brake and make sure the ignition is OFF. ever the hood is raised.
Page 457 WHAT TO DO IN EMERGENCIES 455 4. Connect the opposite end of the negative (-) jumper CAUTION! cable to a good engine ground (exposed metal part of the discharged vehicle’s engine) away from the battery Failure to follow these procedures could result in and the fuel injection system.
Page 458 456 WHAT TO DO IN EMERGENCIES 6. Once the engine is started, remove the jumper cables If frequent jump-starting is required to start your vehicle in the reverse sequence: you should have the battery and charging system in- spected at your authorized dealer. Disconnecting The Jumper Cables 1.
Page 459: Freeing A Stuck Vehicle
WHAT TO DO IN EMERGENCIES 457 FREEING A STUCK VEHICLE CAUTION! (Continued) If your vehicle becomes stuck in mud, sand or snow, it can the risk of clutch or transmission failure during often be moved using a rocking motion. Turn the steering prolonged efforts to free a stuck vehicle.
Page 460: Shift Lever Override
458 WHAT TO DO IN EMERGENCIES SHIFT LEVER OVERRIDE CAUTION! (Continued) If a malfunction occurs and the shift lever cannot be • Revving the engine or spinning the wheels too fast moved out of the PARK position, you can use the may lead to transmission overheating and failure.
Page 461 WHAT TO DO IN EMERGENCIES 459 4. Turn the ignition switch to the ACC or ON/RUN position, but do not start the engine. 5. Press and maintain firm pressure on the brake pedal. 6. Insert the screwdriver or similar tool into the access port, and push and hold the override release lever forward.
Page 462: Towing A Disabled Vehicle
460 WHAT TO DO IN EMERGENCIES TOWING A DISABLED VEHICLE This section describes procedures for towing a disabled vehicle using a commercial towing service. Towing Wheels OFF Manual 6-Speed Automatic 6-Speed Automatic CVT Automatic Condition the Ground Transmission (FWD Only) Transmission Flat Tow NONE...
Page 463: With Ignition Key
WHAT TO DO IN EMERGENCIES 461 Front Wheel Drive (FWD) models (with 6-speed auto- With Ignition Key matic only) may also be towed (under the same limita- Automatic Transmission tions shown above) with the rear wheels elevated. • Front Wheel Drive (FWD) vehicles can be towed with the front wheels elevated, or on a flatbed truck (all four CAUTION! wheels OFF the ground).
Page 464 462 WHAT TO DO IN EMERGENCIES Manual Transmission CAUTION! (Continued) • Front Wheel Drive (FWD) or Four-Wheel Drive (4WD) • Towing this vehicle in violation of the above re- vehicles can be flat towed (all four wheels on the quirements can cause severe engine, transmission, ground) with the transmission in NEUTRAL.
Page 465 WHAT TO DO IN EMERGENCIES 463 CAUTION! • Do not use sling-type equipment when towing. Vehicle damage may occur. • When securing the vehicle to a flatbed truck, do not attach to front or rear suspension components. Damage to your vehicle may result from improper towing.
Page 466 I n f o r ma t i o n P r o v i d e d b y :...
Page 467 MAINTAINING YOUR VEHICLE CONTENTS ENGINE COMPARTMENT — 2.0L ..467 ▫ Engine Oil Filter ..... .476 ENGINE COMPARTMENT —...
Page 468 466 MAINTAINING YOUR VEHICLE ▫ Automatic Transmission (Six-Speed) — REPLACEMENT BULBS ....511 If Equipped ......494 BULB REPLACEMENT .
Page 469: Engine Compartment - 2.0L
MAINTAINING YOUR VEHICLE 467 ENGINE COMPARTMENT — 2.0L 1 — Washer Fluid Reservoir 6 — Air Cleaner Filter 2 — Power Steering Fluid Reservoir 7 — Coolant Pressure Cap 3 — Engine Oil Fill 8 — Engine Oil Dipstick 4 — Brake Fluid Reservoir 9 —...
Page 470: Engine Compartment - 2.4L
468 MAINTAINING YOUR VEHICLE ENGINE COMPARTMENT — 2.4L 1 — Washer Fluid Reservoir 6 — Air Cleaner Filter 2 — Power Steering Fluid Reservoir 7 — Coolant Pressure Cap 3 — Engine Oil Fill 8 — Engine Oil Dipstick 4 — Brake Fluid Reservoir 9 —...
Page 471: Onboard Diagnostic System - Obd Ii
MAINTAINING YOUR VEHICLE 469 ONBOARD DIAGNOSTIC SYSTEM — OBD II CAUTION! Your vehicle is equipped with a sophisticated onboard • Prolonged driving with the MIL on could cause diagnostic system called OBD II. This system monitors further damage to the emission control system. It the performance of the emissions, engine, and automatic could also affect fuel economy and driveability.
Page 472: Emissions Inspection And Maintenance Programs
470 MAINTAINING YOUR VEHICLE RESET button to turn off the message. If the problem Normally, the OBD II system will be ready. The OBD II persists, the message will appear the next time the system may not be ready if your vehicle was recently vehicle is started.
Page 473: Replacement Parts
MAINTAINING YOUR VEHICLE 471 3. Approximately 15 seconds later, one of two things will Regardless of whether your vehicle’s OBD II system is happen: ready or not, if the MIL is illuminated during normal vehicle operation you should have your vehicle serviced •...
Page 474: Maintenance Procedures
472 MAINTAINING YOUR VEHICLE available which include detailed service information for MAINTENANCE PROCEDURES your vehicle. Refer to these Service Manuals before The pages that follow contain the required maintenance attempting any procedure yourself. services determined by the engineers who designed your vehicle.
Page 475: Engine Oil
MAINTAINING YOUR VEHICLE 473 check the engine oil level is about five minutes after a CAUTION! (Continued) fully warmed engine is shut off. Do not check oil level • Your vehicle has been built with improved fluids before starting the engine after it has sat overnight. that protect the performance and durability of your Checking engine oil level when the engine is cold will vehicle and also allow extended maintenance inter-...
Page 476 474 MAINTAINING YOUR VEHICLE Engine Oil Selection CAUTION! For best performance and maximum protection under all Do not overfill the engine. Overfilling the engine types of operating conditions, the manufacturer only will cause oil aeration, which can lead to loss of oil recommends engine oils that are API Certified and meet pressure and an increase in oil temperature.
Page 477 MAINTAINING YOUR VEHICLE 475 Synthetic Engine Oils CAUTION! You may use synthetic engine oils provided the recom- Do not use chemical flushes in your engine oil as the mended oil quality requirements are met, and the recom- chemicals can damage your engine. Such damage is mended maintenance intervals for oil and filter changes not covered by the New Vehicle Limited Warranty.
Page 478: Engine Oil Filter
476 MAINTAINING YOUR VEHICLE station or governmental agency for advice on how and WARNING! where used oil and oil filters can be safely discarded in your area. The air induction system (air cleaner, hoses, etc.) can provide a measure of protection in the case of engine Engine Oil Filter backfire.
Page 479: Maintenance-Free Battery
MAINTAINING YOUR VEHICLE 477 Maintenance-Free Battery WARNING! (Continued) Your vehicle is equipped with a maintenance-free battery. • Battery gas is flammable and explosive. Keep You will never have to add water, nor is periodic main- flame or sparks away from the battery. Do not use tenance required.
Page 480: Air Conditioner Maintenance
478 MAINTAINING YOUR VEHICLE Air Conditioner Maintenance CAUTION! For best possible performance, your air conditioner should • It is essential when replacing the cables on the be checked and serviced by an authorized dealer at the battery that the positive cable is attached to the start of each warm season.
Page 481 MAINTAINING YOUR VEHICLE 479 Refrigerant Recovery And Recycling WARNING! (Continued) R-134a Air Conditioning Refrigerant is a hydrofluoro- • The air conditioning system contains refrigerant carbon (HFC) that is endorsed by the Environmental under high pressure. To avoid risk of personal Protection Agency and is an ozone-saving product.
Page 482 480 MAINTAINING YOUR VEHICLE WARNING! Do not remove the A/C air filter while the blower is operating or personal injury may result. The A/C air filter is located in the fresh air inlet behind the glove box. Perform the following procedure to re- place the filter: 1.
Page 483: Body Lubrication
MAINTAINING YOUR VEHICLE 481 Particular attention should also be given to hood latching CAUTION! components to ensure proper function. When performing other underhood services, the hood latch, release mecha- The A/C air filter is identified with an arrow to nism and safety catch should be cleaned and lubricated. indicate airflow direction through the filter.
Page 484: Adding Washer Fluid
482 MAINTAINING YOUR VEHICLE Avoid using the wiper blades to remove frost or ice from exceeds the temperature range of your climate. This the windshield. Keep the blade rubber out of contact with rating information can be found on most washer fluid petroleum products such as engine oil, gasoline, etc.
Page 485 MAINTAINING YOUR VEHICLE 483 have an authorized technician inspect the complete ex- WARNING! (Continued) haust system and adjacent body areas for broken, dam- • A hot exhaust system can start a fire if you park aged, deteriorated, or mispositioned parts. Open seams over materials that can burn.
Page 486 484 MAINTAINING YOUR VEHICLE In unusual situations involving grossly malfunctioning CAUTION! (Continued) engine operation, a scorching odor may suggest severe • Damage to the catalytic converter can result if your and abnormal catalyst overheating. If this occurs, stop vehicle is not kept in proper operating condition. the vehicle, turn off the engine and allow it to cool.
Page 487: Cooling System
MAINTAINING YOUR VEHICLE 485 Coolant Checks Cooling System Check engine coolant (antifreeze) protection every WARNING! 12 months (before the onset of freezing weather, where applicable). If the engine coolant (antifreeze) is dirty or • When working near the radiator cooling fan, rusty in appearance, the system should be drained, disconnect the fan motor lead or turn the ignition flushed, and refilled with fresh engine coolant (anti-...
Page 488 486 MAINTAINING YOUR VEHICLE Cooling System — Drain, Flush And Refill CAUTION! NOTE: Some vehicles require special tools to add coolant • Mixing of engine coolant (antifreeze) other than properly. Failure to fill these systems properly could lead specified Organic Additive Technology (OAT) en- to severe internal engine damage.
Page 489 MAINTAINING YOUR VEHICLE 487 important that you use the same engine coolant (OAT CAUTION! (Continued) coolant conforming to MS-12106) throughout the life of • Do not use water alone or alcohol-based engine your vehicle. coolant (antifreeze) products. Do not use additional Please review these recommendations for using Organic rust inhibitors or antirust products, as they may not Additive Technology (OAT) engine coolant (antifreeze)
Page 490 488 MAINTAINING YOUR VEHICLE • Use only high purity water such as distilled or deion- • Mixing engine coolant (antifreeze) types is not recom- ized water when mixing the water/engine coolant mended and can result in cooling system damage. (antifreeze) solution. The use of lower quality water If HOAT and OAT coolant are mixed in an emergency, will reduce the amount of corrosion protection in the have a authorized dealer drain, flush, and refill...
Page 491 MAINTAINING YOUR VEHICLE 489 Disposal Of Used Engine Coolant WARNING! Used ethylene glycol-based engine coolant (antifreeze) is • The warning words “DO NOT OPEN HOT” on the a regulated substance requiring proper disposal. Check cooling system pressure cap are a safety precaution. with your local authorities to determine the disposal Never add engine coolant (antifreeze) when the rules for your community.
Page 492 490 MAINTAINING YOUR VEHICLE The radiator normally remains completely full, so there is If an examination of your engine compartment shows no no need to remove the radiator cap unless checking for evidence of radiator or hose leaks, the vehicle may be the coolant freeze point or replacing the engine coolant safely driven.
Page 493: Brake System
MAINTAINING YOUR VEHICLE 491 • Make sure that the coolant expansion bottle overflow WARNING! hoses are not kinked or obstructed. Riding the brakes can lead to brake failure and • Keep the front of the radiator clean. If your vehicle is possibly a collision.
Page 494 492 MAINTAINING YOUR VEHICLE fluid reservoir. Fluid level can be expected to fall as the Use only manufacturer’s recommended brake fluid. Re- brake pads wear. The brake fluid level should be checked fer to “Fluids, Lubricants, and Genuine Parts” in “Main- when the pads are replaced.
Page 495 MAINTAINING YOUR VEHICLE 493 WARNING! (Continued) WARNING! (Continued) • To avoid contamination from foreign matter or • Do not allow petroleum based fluid to contaminate moisture, use only new brake fluid or fluid that has the brake fluid. Brake seal components could be been in a tightly closed container.
Page 496: Maintaining Your Vehicle
494 MAINTAINING YOUR VEHICLE Automatic Transmission (Six-Speed) — CAUTION! (Continued) If Equipped in transmission shift quality and/or torque converter Selection Of Lubricant (Six-Speed Transmission) shudder. Refer to “Fluids, Lubricants, and Genuine Parts” in this section for fluid specifications. It is important to use the proper transmission fluid to ensure optimum transmission performance and life.
Page 497 MAINTAINING YOUR VEHICLE 495 CAUTION! CAUTION! Do not use chemical flushes in your transmission as If a transmission fluid leak occurs, visit your autho- the chemicals can damage your transmission compo- rized dealer immediately. Severe transmission dam- nents. Such damage is not covered by the New age may occur.
Page 498: Automatic Transmission (Cvt) - If Equipped
496 MAINTAINING YOUR VEHICLE Automatic Transmission (CVT) — If Equipped CAUTION! Selection Of Lubricant (CVT) Using a transmission fluid other than the manufac- It is important to use the proper transmission fluid to turer’s recommended fluid may cause belt slip and ensure optimum transmission performance and life.
Page 499 MAINTAINING YOUR VEHICLE 497 your authorized dealer immediately to have the trans- CAUTION! mission fluid level checked. Operating the vehicle with an improper fluid level can cause severe transmission Do not use chemical flushes in your transmission as damage. the chemicals can damage your transmission compo- nents.
Page 500: Manual Transmission - If Equipped
498 MAINTAINING YOUR VEHICLE NOTE: If contaminated with water, the fluid should be Manual Transmission — If Equipped changed immediately. Lubricant Selection Rear Drive Assembly (RDA) — AWD/4WD Models Use only the manufacturers recommended transmission Only fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle”...
Page 501: Power Transfer Unit (Ptu) - Awd/4Wd Models Only
MAINTAINING YOUR VEHICLE 499 Power Transfer Unit (PTU) — AWD/4WD Models Appearance Care And Protection From Corrosion Only Protection Of Body And Paint From Corrosion Lubricant Selection Vehicle body care requirements vary according to geo- Use only the manufacturer’s recommended fluid. Refer graphic locations and usage.
Page 502 500 MAINTAINING YOUR VEHICLE What Causes Corrosion? • If insects, tar, or other similar deposits have accumu- lated on your vehicle, use MOPAR® Super Kleen Bug Corrosion is the result of deterioration or removal of and Tar Remover to remove. paint and protective coatings from your vehicle.
Page 503 MAINTAINING YOUR VEHICLE 501 Special Care • If you carry special cargo such as chemicals, fertilizers, de-icer salt, etc., be sure that such materials are well • If you drive on salted or dusty roads or if you drive packaged and sealed. near the ocean, hose off the undercarriage at least once a month.
Page 504 502 MAINTAINING YOUR VEHICLE NOTE: If your vehicle is equipped with Dark Vapor or Stain Repel Fabric Cleaning Procedure — Black Satin Chrome wheels DO NOT USE wheel cleaners, If Equipped abrasives or polishing compounds. They will perma- Stain Repel seats may be cleaned in the following manner: nently damage this finish and such damage is not cov- •...
Page 505 MAINTAINING YOUR VEHICLE 503 Interior Care WARNING! Use MOPAR® Total Clean to clean fabric upholstery and Do not use volatile solvents for cleaning purposes. carpeting. Many are potentially flammable, and if used in Use MOPAR® Total Clean to clean vinyl upholstery. closed areas they may cause respiratory harm.
Page 506 504 MAINTAINING YOUR VEHICLE To minimize the possibility of scratching the lenses and When cleaning the rear view mirror, spray cleaner on the reducing light output, avoid wiping with a dry cloth. To towel or rag that you are using. Do not spray cleaner remove road dirt, wash with a mild soap solution fol- directly on the mirror.
Page 507 MAINTAINING YOUR VEHICLE 505 Cleaning Plastic Instrument Cluster Lenses If the belts need cleaning, use MOPAR® Total Clean, a mild soap solution, or lukewarm water. Do not remove The lenses in front of the instruments in this vehicle are the belts from the vehicle to wash them. Dry with a soft molded in clear plastic.
Page 508: Fuses
506 MAINTAINING YOUR VEHICLE FUSES WARNING! (Continued) • Before replacing a fuse, make sure that the ignition WARNING! is off and that all the other services are switched off • When replacing a blown fuse, always use an ap- and/or disengaged. propriate replacement fuse with the same amp •...
Page 509: Integrated Power Module
MAINTAINING YOUR VEHICLE 507 Integrated Power Module The Integrated Power Module is located in the engine compartment near the air cleaner assembly. This center contains cartridge fuses and mini-fuses. A label that identifies each component may be printed on the inside of the cover.
Page 510 508 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Mini-Fuse Description 10 Amp Red Ignition Switch/Occupant Classification Module 15 Amp Lt Blue Battery Feed For Power Tech 10 Amp Red Power Mirror/Steering Control Satellite Radio/Hands-Free Phone 30 Amp Green Ignition Off Draw 30 Amp Green Ignition Off Draw 40 Amp Green...
Page 511 MAINTAINING YOUR VEHICLE 509 Cavity Cartridge Fuse Mini-Fuse Description 40 Amp Green Auto Shutdown Relay 20 Amp Yellow Radio Amplifiers 15 Amp Lt Blue Radio 10 Amp Red Intrusion Module/Siren – If Equipped 10 Amp Red Heating, AC/Compass 15 Amp Lt Blue Auto Shutdown Relay 15 Amp Lt Blue Power Sunroof –...
Page 512 510 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Mini-Fuse Description 30 Amp Pink Auto Shutdown Relay 10 Amp Red J1962 Conn/Powertrain Control Module 30 Amp Pink Antilock BrakeValve 40 Amp Green Antilock Brake Pump 30 Amp Pink Headlamp/Washer Control/Smart Glass – If Equipped CAUTION! CAUTION! (Continued)
Page 513: Vehicle Storage
MAINTAINING YOUR VEHICLE 511 VEHICLE STORAGE REPLACEMENT BULBS If you will not be using your vehicle for more than 21 days, Interior Bulbs you may want to take steps to preserve your battery. Bulb Number • Disengage the mini-fuse in the Power Distribution Front Header Lamp T578 Center labeled IOD (Ignition Off-Draw).
Page 514: Bulb Replacement
512 MAINTAINING YOUR VEHICLE BULB REPLACEMENT Bulb Number Premium Front Park 3157K NOTE: Lens fogging can occur under certain atmo- Lamp spheric conditions. This will usually clear as atmospheric conditions change to allow the condensation to change Front Park/Turn Signal 7444NA back into a vapor.
Page 515: Fog Lamps
MAINTAINING YOUR VEHICLE 513 4. Twist the bulb to the left. 5. Pull bulb outward from assembly. NOTE: These are halogen bulbs. Take care not to touch the bulb with your fingers. Body oils from your fingers could cause excessive heat buildup which reduces bulb life.
Page 516: License Lamps
514 MAINTAINING YOUR VEHICLE License Lamps Center High-Mounted Stoplamp This light is an LED assembly. See your authorized dealer 1. Use a screw driver to gently pry against the side of the for replacement. snap tab to remove the lamp from the liftgate. 2.
Page 517: Fluids, Lubricants And Genuine Parts
MAINTAINING YOUR VEHICLE 515 FLUIDS, LUBRICANTS AND GENUINE PARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant We recommend you use MOPAR® Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent meeting the require- ments of Chrysler Material Standard MS-12106. Engine Oil We recommend you use API Certified SAE 5W-20 Engine Oil, meeting the requirements of Chrysler Material Standard MS-6395 such as MOPAR®, Pennzoil®,...
Page 518 516 MAINTAINING YOUR VEHICLE CAUTION! CAUTION! (Continued) • Do not use water alone or alcohol-based engine • Mixing of engine coolant (antifreeze) other than coolant (antifreeze) products. Do not use additional specified Organic Additive Technology (OAT) en- rust inhibitors or antirust products, as they may not gine coolant (antifreeze), may result in engine be compatible with the radiator engine coolant and damage and may decrease corrosion protection.
Page 519: Chassis
MAINTAINING YOUR VEHICLE 517 Chassis Component Fluid, Lubricant, or Genuine Part Automatic Transmission Use only MOPAR® CVTF+4® Continuously Variable Transmission Fluid or (CVT) — If Equipped equivalent. Failure to use the correct fluid may affect the function or performance of your transmission. Automatic Transmission Use only MOPAR®...
Page 520 I n f o r ma t i o n P r o v i d e d b y :...
Page 521: Maintenance Schedules
MAINTENANCE SCHEDULES CONTENTS MAINTENANCE SCHEDULE ... . .520 ▫ Maintenance Chart.....522 I n f o r ma t i o n P r o v i d e d b y :...
Page 522 520 MAINTENANCE SCHEDULES On Electronic Vehicle Information Center (EVIC) MAINTENANCE SCHEDULE equipped vehicles, “Oil Change Required” will be dis- Your vehicle is equipped with an automatic oil change played in the EVIC and a single chime will sound, indicator system. The oil change indicator system will indicating that an oil change is necessary.
Page 523 MAINTENANCE SCHEDULES 521 Severe Duty All Models At Every Oil Change Interval As Indicated By Oil Change Engine Oil at 4000 miles (6,500 km) if the vehicle Change Indicator System: is operated in a dusty and off road environment. This •...
Page 524 522 MAINTENANCE SCHEDULES Maintenance Chart Refer to the Maintenance Schedules on the following pages for the required maintenance intervals. Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Additional Inspections Inspect the CV joints. Inspect front suspension, boot seals. tie rod ends, and replace if necessary.
Page 525 MAINTENANCE SCHEDULES 523 Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Additional Maintenance Replace engine air cleaner filter. Replace air conditioning/cabin air filter. Replace spark plugs** Flush and replace the engine coolant at 10 years or 150,000 miles (240,000 km) whichever comes first. Replace rear drive assembly (RDA) fluid.
Page 526 524 MAINTENANCE SCHEDULES Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Change automatic transmission fluid and filter if using your vehicle for any of the following: police, taxi, fleet, or frequent trailer towing. (CVT only) Change the automatic transmission fluid and filter. (CVT only) Change the automatic transmission fluid and filter (six-speed only) if you frequently drive: on rough or...
Page 527 MAINTENANCE SCHEDULES 525 Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Change the manual transmission fluid if using your vehicle for any of the following: trailer towing, heavy loading, taxi, police, delivery service (commercial ser- vice), off-road, desert operation or more than 50% of your driving is at sustained high speeds during hot weather, above 90°F (32°C).
Page 528 526 MAINTENANCE SCHEDULES WARNING! • You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent me- chanic.
Page 529: If You Need Consumer Assistance
IF YOU NEED CONSUMER ASSISTANCE CONTENTS SUGGESTIONS FOR OBTAINING SERVICE ▫ Customer Assistance For The Hearing Or FOR YOUR VEHICLE ....529 Speech Impaired (TDD/TTY) ... . .531 ▫...
Page 530 528 IF YOU NEED CONSUMER ASSISTANCE PUBLICATION ORDER FORMS ... .534 ▫ Traction Grades ..... . .536 DEPARTMENT OF TRANSPORTATION ▫...
Page 531: Suggestions For Obtaining Service For Your Vehicle
IF YOU NEED CONSUMER ASSISTANCE 529 SUGGESTIONS FOR OBTAINING SERVICE FOR Be Reasonable With Requests YOUR VEHICLE If you list a number of items and you must have your vehicle by the end of the day, discuss the situation with Prepare For The Appointment the service advisor and list the items in order of priority.
Page 532: Chrysler Group Llc Customer Center
530 IF YOU NEED CONSUMER ASSISTANCE facilities, factory-trained technicians, special tools, and • Authorized dealer name the latest information to ensure the vehicle is fixed • Vehicle Identification Number (VIN) correctly and in a timely manner. • Vehicle delivery date and mileage This is why you should always talk to an authorized Chrysler Group LLC Customer Center dealer service manager first.
Page 533: In Mexico Contact
IF YOU NEED CONSUMER ASSISTANCE 531 Canadian residents with hearing difficulties that require In Mexico Contact: assistance can use the special needs relay service offered Av. Prolongacion Paseo de la Reforma, 1240 by Bell Canada. For TTY teletypewriter users, dial 711 Sante Fe C.P.
Page 534: Warranty Information
532 IF YOU NEED CONSUMER ASSISTANCE The manufacturer will not stand behind any service WARNING! contract that is not the manufacturer’s service contract. It is not responsible for any service contract other than the Engine exhaust (internal combustion engines only), manufacturer’s service contract.
Page 535: Mopar® Parts
IF YOU NEED CONSUMER ASSISTANCE 533 individual problems between you, your authorized MOPAR® PARTS dealer, and the manufacturer. MOPAR® fluids, lubricants, parts, and accessories are available from an authorized dealer. They are recom- To contact NHTSA, you may either call the Auto Safety mended for your vehicle in order to help keep the vehicle Hotline toll free at 1–888–327–4236 (TTY: 1–800–424–9153), operating at its best.
Page 536 534 IF YOU NEED CONSUMER ASSISTANCE Diagnostic Procedure Manuals PUBLICATION ORDER FORMS To order the following manuals, you may use either the Diagnostic Procedure Manuals are filled with diagrams, website or the phone numbers listed below. Visa, Master- charts and detailed illustrations. These practical manuals card, American Express, and Discover orders are ac- make it easy for students and technicians to find and fix cepted.
Page 537 IF YOU NEED CONSUMER ASSISTANCE 535 Call toll free at: All passenger car tires must conform to Federal safety requirements in addition to these grades. • 1–800–890–4038 (U.S.) Treadwear • 1–800–387–1143 (Canada) The Treadwear grade is a comparative rating, based on the wear rate of the tire when tested under controlled conditions on a specified government test course.
Page 538 536 IF YOU NEED CONSUMER ASSISTANCE controlled conditions on a specified indoor laboratory Traction Grades test wheel. Sustained high temperature can cause the The Traction grades, from highest to lowest, are AA, A, B, material of the tire to degenerate and reduce tire life, and and C.
Page 539 INDEX I n f o r ma t i o n P r o v i d e d b y :...
Page 540 538 INDEX ABS (Anti-Lock Brake System) ....356 Air bag Deployment ......61 Adding Engine Coolant (Antifreeze) .
Page 541 INDEX 539 Anti-Lock Brake System (ABS) ....356 Battery ....... . .477 Anti-Lock Warning Light .
Page 542 540 INDEX Calibration, Compass ..... .239 Cellular Phone ......111 Camera, Rear .
Page 543 INDEX 541 Older Children And Child Restraints ..79 Universal Consumer Interface (UCI) ..287 Seating Positions ......82 Console .
Page 544 542 INDEX Data Recorder, Event ..... . .75 Downshifting ......322 Dealer Service.
Page 545 INDEX 543 Emission Control System Maintenance ..470 Event Data Recorder ......75 Engine .
Page 546 544 INDEX Automatic Transmission ....495 Gasoline ......403 Cooling System .
Page 547 INDEX 545 Fuel ....... . .214 Head Restraints ......155 Odometer .
Page 548 546 INDEX Instrument Cluster ......214 Key, Replacement ......16 Instrument Panel and Controls .
Page 549 INDEX 547 Back-Up ......513 Lights On Reminder .....164 Brake Assist Warning .
Page 550 548 INDEX Door ....... . .30 Map/Reading Lights ..... . .167 Power Door .
Page 551 INDEX 549 Occupant Restraints ......39 Onboard Diagnostic System ....469 Octane Rating, Gasoline (Fuel) .
Page 552 550 INDEX Outlet (Auxiliary Electrical Outlet) ...191 Rear Drive Assembly..... . .498 Steering .
Page 553 INDEX 551 Replacement Bulbs ......511 Schedule, Maintenance .....520 Replacement Keys .
Page 554 552 INDEX Front Seat ......41 Sentry Key (Immobilizer) ....15 Inspection .
Page 555 INDEX 553 Starting ....... .316 Synthetic Engine Oil ..... . .475 Automatic Transmission .
Page 556 554 INDEX Jacking .......432 Towing ....... .412 Life of Tires .
Page 557 INDEX 555 Transmission Things You Should Know About Your Automatic ......322 Uconnect® Phone ..... . .130 Fluid .
Page 558 556 INDEX Vanity Mirrors ......110 Warranty Information ..... .532 Variance, Compass .
Page 559 INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into The antenna cable should be as short as practical this vehicle’s electronic system to provide immunity and routed away from the vehicle wiring when pos- to radio frequency signals. Mobile two-way radios sible.
Page 560 Chrysler Group LLC 15WK741-126-AA First Edition Printed in U.S.A. Second Edition Printed in U.S.A 15MK49-126-AB I n f o r ma t i o n P r o v i d e d b y :...

Jeep Compass 2015 Owner's Manual

Introduction 1

! Introduction

! Rollover Warning

Things to Know before Starting Your Vehicle

A Word about Your Keys

Sentry Key

Vehicle Security Alarm - if Equipped

Remote Keyless Entry (Rke) - if Equipped

Remote Starting System - if Equipped

Door Locks

Power Windows - if Equipped

Liftgate

Occupant Restraint Systems

Engine Break-In Recommendations

Safety Tips

Understanding the Features of Your Vehicle

Understanding Your Instrument Panel

Instrument Panel Features

Instrument Cluster

Instrument Cluster Descriptions

Mini-Trip Computer - if Equipped

Electronic Vehicle Information Center (Evic) - if Equipped

Uconnect® 230 - AM/FM STEREO RADIO and 6-DISC CD/DVD CHANGER (MP3/WMA AUX JACK)

UNDERSTANDING YOUR INSTRUMENT PANEL Operation Instructions - DISC Mode for CD and MP3/WMA Audio Play, DVD - Video

Uconnect® 730N/430/430N CD/DVD//Operating Instructions (Voice Command System) - if Equipped

These Buttons Tune the Radio to the Channels that You

Uconnect® 130 with SATELLITE RADIO

Ipod®/Usb/Mp3 CONTROL - if EQUIPPED

Steering Wheel Audio Controls

CD/DVD Disc Maintenance

Radio Operation and Mobile Phones

Climate Controls

Starting and Operating

Manual Transmission - if Equipped

Engine Block Heater - if Equipped

Automatic Transmission

If Equipped

Starting and Operating

Power Steering

Parking Brake

Brake System

Electronic Brake Control System

Tire Safety Information

Tires - General Information

Tire Chains (Traction Devices)

Starting and Operating Tire Rotation Recommendations

Adding Fuel

Vehicle Loading

Trailer Towing

Towing Requirements

Towing Tips

Recreational Towing (Behind Motorhome, Etc.)

Quick Links

Chapters

Related Manuals for Jeep Compass 2015

Summary of Contents for Jeep Compass 2015