Jeep 1979 CJ-5 Technical & Service Manual page 392

MANUAL TRANSMISSION
ZB-29
Torque Specifications
Service Set-To Torques should be used when assembling components. Service In-Use Recheck Torques should be used for checking a pre-torqued item.
USA (ft. lbs.)
Metric (N-m)
Service Service
Service
In-Use
Service In-Use
Set-To Recheck Set-To Recheck
Torque Torque
Torque
Torque
Backup Lamp Switch
18 15-20
24
20-27
Drain Plug
15
10-20
20 14-27
Fill Plug
15
10-20
20 14-27
Front Bearing Cap Bolt
15
12-18
20
16-24
Shift Control Housing-to-Case Bolt
. . . . . 12 10-15 16 14-20
Transfer Case Drive Gear Locknut
150 145-155 203 197-210
Transfer Case-to-Transmission Case Bolt
30 25-35 41 34-47
TCS Switch
18 15-20 24 20-27
A l l torque values given in newton-meters and foot-pounds w i t h dry fits unless otherwise specified.
Refer t o the Standard Torque Specifications and Capscrew Marking chart in Chapter A f o r torque values not listed above.
8 0 1 2 3
Tools
J-25232
A R B O R T O O L
J-26852
M A I N S H A F T R E A R
S E A L I N S T A L L E R
J-6654-01
B E A R I N G REMOVER
J-25233
F R O N T B E A R I N G CAP
S E A L I N S T A L L E R
8 0 6 6 0