Jeep 1979 CJ-5 Technical & Service Manual page 639

2G-46 BRAKES
(3) Eaise vehicle.
(4) Remove front wheels.
N O T E : Work on one caliper at a time only.
(5) Press caliper piston to bottom of bore using
screwdriver (fig. 2G-42). If piston is difficult to move,
use large C-clamp.
(6) Remove caliper support key retaining screw us-
ing 1/4 hex wrench (fig. 2G-43).
4 2 8 7 2
Fig. 2 8 4 2 Bottoming Caliper Piston
(7) Remove caliper support key and spring using
using punch and hammer (fig. 2G-44).
(8) Lift caliper upward and out of anchor plate and
off of rotor (fig. 2G-45).
(9) Place caliper on front suspension spring. Do not
let brake hose support weight of caliper.
(10) Remove inboard brakeshoe from anchor plate
(fig.2G-46).
Fig. 2G-44 Support Key and Spring Removal
Fig. 2G-43 Support Key Retaining Screw Removal
Fig. 26-45 Caliper Removal/Installation