Jeep 1979 CJ-5 Technical & Service Manual page 899

3M-8 SEAT ASSEMBLIES
(2) Remove seat belt.
(3) Remove shoulder belt guide cover from guide, if
equipped.
(4) Remove guide bolt with Torx Bit Tool J-25359-
02.
(5) Obtain access to seat belt retractors by remov-
ing trim covers.
(6) Remove seat belt retractors anchor bolts with
Torx Bit Tool J-25359-02.
(7) Remove seat belt retractor.
(8) Inspect seat belt material for evidence of wear,
cuts, or fraying. Replace as required.
Installation
(1) Install seat belt and seat belt retractor anchor
bolts. Tighten to 25 to 35 foot-pounds (34 to 47 N*m)
torque.
(2) Position shoulder belt guide on B-pillar and in-
stall bolt with Torx Bit Tool J-25359-02.
(3) Install shoulder belt guide cover.
(4) Install seat belt retractor trim cover.
Tools
mm
mm
J-25359-02 T O R X BIT A N D SOCKET SET
70119