Bumpers - Jeep 1979 CJ-5 Technical & Service Manual

BODY AND FRAME COMPONENTS 3F-11
B U M P E R S
P i P P l j l
Front Pumpers 3F-11 Rear Bumpers 3F-12
Sonera! 3F-11
GENERAL
Front bumpers on CJ models are of one-piece con-
struction. When vehicle is equipped with rear mounted
spare, two separate bumperettes are used.
Front bumpers on the Cherokee, Wagoneer, and Truck
models are one-piece chromed aluminum. Rear bumpers
are the same construction and are used on the Cherokee
and Wagoneer. Trucks, when equipped with a rear
bumper, have a one-piece step bumper.
Front bumper guards are available as an option on
standard bumpers on all models except CJ.
FRONT BUMPERS
CJ Models
Removal
(1) Remove nuts and bolts attaching front bumper
rail (fig. 3F-15) to frame extensions.
(2) Remove f r o n t b u m p e r rail from f r a m e
extensions.
BUMPER
R A I L
Fig. 3F-15 Front lumper—CJ Models
Installation
(1) Position front bumper rail on frame extension.
(2) Install bolts and nuts attaching front bumper
rail to frame extension.
Cherokee-Wagoneer-Truck Models
Removal
(1) Remove vertical bumper guard (fig. 3F-16) from
bumper end rail, if equipped.
Fig. 3F-16 Front lumper—Cherokee-Wagoneer-Truck Models