About This Installation Guide; Related Documentation; Using Zonedirector To Manage The Cmap - Ruckus Wireless ZoneFlex 7761-CM Installation Manual

Dual band 802.11n outdoor access point with integrated cable modem
Hide thumbs Also See for ZoneFlex 7761-CM:
Table of Contents

Advertisement

1

About This Installation Guide

This Installation Guide provides information on how to set up the Cable Modem Access
Point (CMAP) for Japan markets on your network. Topics covered in this guide include
installation, basic configuration, operation and mounting.
This guide is intended for use by those responsible for installing and setting up network
equipment. Consequently, it assumes a basic working knowledge of local area networking,
cable modem setup and configuration, wireless networking, and wireless devices.
NOTE: The cable modem and access point each has its own independent firmware load
that is updated independently.

Related Documentation

In addition to this guide, each Cable Modem Access Point documentation set includes
the following:
User Guide: Provides detailed information on how to configure the functions of the
unit. The User Guide is available for download on the Ruckus Wireless Support Web
site at
http://support.ruckuswireless.com/documents
Ruckus Wireless External Antenna Mounting Reference Sheet: Provides instructions for
mounting compatible Ruckus Wireless external antennas onto the strand interface for
the Cable Modem Access Point.
Release Notes: Provides late-breaking information about the current software release,
including new features, enhancements, and known issues. If the information in the
Release Notes differs from the information in this guide, follow the instructions in the
Release Notes.
Online Help: Accessible from the CMAP's Web interface, the Online Help provides
information that helps you configure the device from the Web interface.

Using ZoneDirector to Manage the CMAP

If you are planning to use a Ruckus Wireless ZoneDirector to manage the CMAP, this guide
describes the required steps that enable the access point to report to and communicate
with ZoneDirector successfully. Refer to
(ZoneDirector Management Only)"
"Configure Option 43 on the DHCP Server
on page 18.
1

Advertisement

Table of Contents
loading

Table of Contents