Rocker Dip Switch - Advanced Energy Pinnacle User Manual

®
Advanced Energy
serve the same function. Both DIPs contain eight miniature switches (here called
"min-switches"). In all units, setting a switch to the "up" position means setting it
toward the numbers on the DIP, and setting a switch to the "down" position means
setting it away from the numbers. On "rocker" DIPs, "up" means that the side of the
switch toward the numbers is depressed. On "slide" DIPs, "up" means that the slide is
pushed toward the numbers.
Figure 4-12. Rocker DIP switch
Note: The rocker DIP is internally located on units equipped with a master/slave
interface card.
Note: Dual inverter units do not have master/slave capability and will not be
configured with a master/slave interface card.
Figure 4-13. Slide DIP switch
Note: The slide DIP is externally located on units with dual inverters or units not
configured with a master/slave interface card.
4-50 I/O Communication and Control 5702156-E