Devicenet™ Port - Advanced Energy Pinnacle User Manual

®
Advanced Energy
Table 4-1. User Port Pin Descriptions (Continued)
Signal
Pin
10
11
12
13
14
15
DEVICENET™ PORT
The rear panel of your Pinnacle unit features DeviceNet port for interfacing with a
DeviceNet network. The DeviceNet port is a round, five-pin, male micro connector,
which is electrically isolated from the power supply (see Figure 4-2).
Note: Dual Pinnacle units (units containing two, seperate inverters) share the common
DeviceNet network micro connector, but each side is controlled and operated
independently through this port. The following discussion describes the
operation of one side of the unit. The other side operates the same way.
The following paragraphs describe the interface and the associated rotary switches
and LEDs.
4-4
Return Pin Name
Pin
n/a MOD GREEN
INTERLOCK.
12
D
INTLK COM.D
n/a
NET GREEN
n/a
n/a MOD AMBER
n/a NET AMBER
I/O Communication and Control
Signal Description
Type
Output This pin is the emitter side of
an opto-coupler (for MOD
LED).
Input This digital signal provides
an interlock. Closure
between pins 11 and 12
enables the AC input power
contactor.
n/a This signal is the return
reference for the interlock
signal on pin 11.
Output This pin is the emitter side of
an opto-coupler (for NET
LED).
Output This pin is the emitter side of
an opto-coupler (for the
MOD LED).
Output This pin is the emitter side of
an opto-coupler (for the NET
LED).
5702156-E