Contactor Interlock Connector; Contactor Interlock Pin Descriptions - Advanced Energy Pinnacle User Manual

®
Advanced Energy
INTERLOCK port (through a cheater plug, external switch, or relay). Pin 3 can sink
60 mA. Pin 4 supplies the interlock system (string) with 18 V (voltage on this pin
should not exceed 20 V). Pin 4 can source 60 mA.
Figure 5-3. CONTACTOR INTERLOCK connector
PIN DESCRIPTIONS
Note: The mating connector, connector shell, and post screws are included in the
hardware kit that accompanied your Pinnacle unit.
Table 5-3. Contactor Interlock Pin Descriptions
Pin Return
Pin
1
n/a
2
n/a
3
n/a
4
n/a
5-8
Pin Name
n/a
n/a
n/a
n/a
Installation
Signal Description
Type
On the 400 V Pinnacle supply,
n/a
Pins 1 and 2 on this port are
n/a
feedback connections from a
set of (normally open)
auxiliary connectors on the
main contactor.
n/a To enable the Pinnacle
supply's main contactor, short
n/a
together pins 3 and 4 on the
CONTACTOR INTERLOCK
port (through a cheater plug,
external switch, or relay).
Pin 3 can sink 60 mA.
Pin 4 supplies the interlock
system (string) with 18 V
(voltage on this pin should not
exceed 20 V). Pin 4 can
source 60 mA.
5702156-E