Standard Serial (Flash) Port - Advanced Energy Pinnacle User Manual

®
Advanced Energy
To select the ramp time:
1. Press PROCESS → CONTROL → RAMP → TIME.
2. Rotate the MODIFY knob to select a time.
3. Press ENTER to accept and exit.
Note: Under "Host" control, one can generate multiple ramps between setpoints by
setting new setpoints while the output is on.

STANDARD SERIAL (FLASH) PORT

Your Pinnacle supply contains a modified AE Bus serial (Host) communications
interface accessible through the standard serial
4-46 I/O Communication and Control 5702156-E