Remote Active Panel Connector; Remote Active Panel Pin Descriptions - Advanced Energy Pinnacle User Manual

Pinnacle™ 20 kW
Figure 4-4. Remote Active Panel connector
The pin descriptions for this connector appear in the following list. Please see the next
page for installation instructions.
Note: The Pinnacle Remote Active Panel is not hot pluggable.
Table 4-9. Remote Active Panel Pin Descriptions
Pin
1
2
3
4
5
6
7
8
9
When installing the Pinnacle Remote Active Panel, do not connect to or
disconnect from a Pinnacle unit that is receiving AC input power.
Damage to equipment could result. Before connecting or disconnecting
the Pinnacle Remote Active Panel, first turn off the AC input power.
To connect your Pinnacle power supply to the Pinnacle Remote Active Panel:
1. Turn off AC input power to the Pinnacle unit.
2. Connect the cable between the REMOTE ACTIVE PANEL connector on the
Pinnacle supply and the Pinnacle Remote Active Panel.
3. Turn on AC input power to the Pinnacle unit.
5702156-E
Description
Do not connect
Do not connect
Do not connect
Do not connect
Ground
TR-
TR+
R-
R+
I/O Communication and Control 4-15