®
Advanced Energy
Figure 5-8. Configuration for Pinnacle master/slave system
MONITORING YOUR MASTER / SLAVE SYSTEM
• If you have a passive front panel or remote passive panel attached to your master
unit, you can view the combined output of your master/slave system (power or
current). The passive front panel of each slave unit displays the individual unit's
output. For more information, see the "I/O Communication and Control" chapter.
• If you have an active front panel or Pinnacle Remote Active Panel attached to your
master unit, you can monitor the output (power, current, or voltage) of your
system and the output of each individual unit. For more information, see the "I/O
Communication and Control" chapter.
5-16
Installation
5702156-E