Configuration - Comtech EF Data SDM-9000 Installation And Operation Manual

SDM-9000 Satellite Modem

4.2.1 Configuration

Refer to the menu trees (Figures 4-3 through 4-7) for configuration changes. Modem
configuration may be viewed or changed by entering the Configuration level from the
Function Select menu on the front panel. Once in the Configuration menu, press [
→
[ ] to select one of the following configurations:
•
•
•
•
•
Enter the selected configuration menu by pressing [ENTER]. Press [
selected configuration parameters. If a configuration parameter change is required, press
[ENTER] to begin the change process.
Press the arrow keys to change the parameters. After the display represents the correct
parameters, execute the change by pressing [ENTER]. This action initiates the necessary
programming by the modem.
To cancel a parameter prior to executing the change, simply press [CLEAR].
Notes:
1. Hardware configuration may change the front panel menu selection (all front
2. If a particular window is specific to a certain modem configuration, the user will
Rev. 4
Modulator
Demodulator
Interface
Save
Recall
panel configuration windows are listed in the following paragraphs).
not be able to enter that window unless that configuration is selected. This
eliminates incompatible parameters from accidentally being set in the different
modes of operation.
Operation
←
] or
← →
] or [ ] to view the
4–5