Comtech EF Data SDM-9000 Installation And Operation Manual page 243

SDM-9000 Satellite Modem
Bulk Consol.
Status
(continued)
Parameter
Number
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
Rev. 4
Parameter Name
(Command Reference)
Descrambler enable
(ref. 'DE_' command).
Buffer clock source
(ref. 'BC_' command).
Interface buffer size
(ref. 'IBS_' command).
Interface transmit overhead type
(ref. 'ITOT_' command).
Interface receive overhead type
(ref. 'IROT_' command).
Interface substitution pattern
(ref. 'ISP_' command).
Interface read error
(ref. 'IRE_' command).
Transmit data fault
(ref. 'TDF_' command).
Receive data fault
(ref. 'RDF_' command).
Interface service channel TX1
(ref. 'ISCL_' command).
Interface service channel TX2
(ref. 'ISCL_' command).
Interface service channel RX1
(ref. 'ISCL_' command).
Interface service channel RX2
(ref. 'ISCL_' command).
Transmit data phase
(ref. 'TDP_' command).
Receive data phase
(ref. 'RDP_' command).
Backward Alarm enable TX1
(ref. 'BW_TX1_' command).
Backward Alarm enable TX2
(ref. 'BW_TX2_' command).
Backward Alarm enable TX3
(ref. 'BW_TX3_' command).
Backward Alarm enable TX4
(ref. 'BW_TX4_' command).
Backward Alarm enable RX1
(ref. 'BW_RX1_' command).
Description
p36 = n, where 'n' is '0' (OFF) or '1' (ON).
p37 = n, where 'n' is '0' (INT), '1' (REF), '2' (EXT), '3' (SAT), or
'4' (HS).
p38 = nn, buffer size in milli-seconds.
p39 = n, where 'n' is '0' (NONE) or '1' (IDR).
p40 = n, where 'n' '0' (NONE) or '1' (IDR).
p41 = n, where 'n' is '0' (OFF) or '1' (ON).
p42 = n, where 'n' is '0' (FRM/OFF) or '1' (2047/ON).
p43 = n, where 'n' is '0' (NONE), '1' (DATA), or '2' (AIS).
p44 = n, where 'n' is '0' (NONE), '1' (DATA), or '2' (AIS).
p45 = nnn, service channel level in dBm.
p46 = nnn, service channel level in dBm.
p47 = nnn, service channel level in dBm.
p48 = nnn, service channel level in dBm.
p49 = n, where 'n' is '0' (NRM) or '1' (INV).
p50 = n, where 'n' is '0' (NRM) or '1' (INV).
p51 = n, where 'n' is '0' (OFF) or '1' (ON).
p52 = n, where 'n' is '0' (OFF) or '1' (ON).
p53 = n, where 'n' is '0' (OFF) or '1' (ON).
p54 = n, where 'n' is '0' (OFF) or '1' (ON).
p55 = n, where 'n' is '0' (OFF) or '1' (ON).
Remote Control Operation
B–25