Comtech EF Data SDM-9000 Installation And Operation Manual page 241

SDM-9000 Satellite Modem
Bulk Consol.
Status
(continued)
Parameter
Number
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
Rev. 4
Parameter Name
(Command Reference)
Demodulator preset A
assignment
(ref. 'ADRA_' command).
Demodulator preset B
assignment
(ref. 'ADRB_' command).
Demodulator preset C
assignment
(ref. 'ADRC_' command).
Demodulator preset D
assignment
(ref. 'ADRD_' command).
Differential decoder enable
(ref. 'DDEC_' command).
RF loopback
(ref. 'RFL_' command).
IF loopback
(ref. 'IFL_' command).
BER threshold
(ref. 'BERT_' command).
Demodulator Spectrum Rotation
(ref. 'DSR_' command).
Reed-Solomon Decoder Enable
(ref. 'RSDE_' command).
External reference frequency
(ref. 'ERF_' command).
Transmit clock phase
(ref. 'TCP_' command).
Receive clock phase
(ref. 'RCP_' command).
Baseband loopback
(ref. 'BBL_' command).
Interface loopback
(ref. 'ILB_' command).
Interface loop timing
(ref. 'ILT_' command).
TX Interface coding format
(ref. 'ICFT_' command).
RX Interface coding format
(ref. 'ICFR_' command).
Scrambler enable
Description
p17 = nnnnn_mmmmm.mmm, code rate/data rate in kbit/s.
p18 = nnnnn_mmmmm.mmm, code rate/data rate in kbit/s.
p19 = nnnnn_mmmmm.mmm, code rate/data rate in kbit/s.
p20 = nnnnn_mmmmm.mmm, code rate/data rate in kbit/s.
p21 = n, where 'n' is '0' (OFF) or '1' (ON).
p22 = n, where 'n' is '0' (OFF) or '1' (ON).
p23 = n, where 'n' is '0' (OFF) or '1' (ON).
p24 = xxxx, BER threshold.
p25 = n, where 'n' is '0' (NRM) or '1' (INV).
p26 = n, where 'n' is '0' (OFF), '1' (ON), or '2' (CORR_OFF).
p27 = nnnnn.nnn, external reference frequency in kHz.
p28 = n, where 'n' is '0' (NRM) or '1' (INV).
p29 = n, where 'n' is '0' (NRM) or '1' (INV).
p30 = n, where 'n' is '0' (OFF) or '1' (ON).
p31 = n, where 'n' is '0' (OFF) or '1' (ON).
p32 = n, where 'n' is '0' (OFF) or '1' (ON).
p33 = n, where 'n' is '0' (AMI), '1' (B3ZS), or '2' (HDB3).
p34 = n, where 'n' is '0' (AMI), '1' (B3ZS), or '2' (HDB3).
p35 = n, where 'n' is '0' (OFF) or '1' (ON).
Remote Control Operation
B–23