Comtech EF Data SDM-9000 Installation And Operation Manual page 239

SDM-9000 Satellite Modem
Bulk Command:
Consol. Response:
Analog
Status
Where: 'pn' is the last parameter returned.
Parameter
Number
1
2
3
4
5
6
Note: Parameters 2 through 6 are dependent on carrier acquisition. If the decoder is not locked, empty data blocks are returned
(,,,,,).
Rev. 4
<add/BCAS_'cr'
>add/BCAS_p1,p2,p3, . . . pn'cr''lf']
Parameter Name
(Command Reference)
Receive Signal Level
(ref. 'RSL_' command).
Raw BER
(ref. 'RBER_' command).
Corrected BER
(ref. 'CBER_' command).
Interface Read Error
(ref. 'IRES_' command).
E /N
b 0
(ref. 'EBN0_' command).
Buffer Fill Status
(ref. 'IBFS_' command).
This command is similar to the 'BCS_' command, but
returns modem analog parameters. Additional status of
new options and features will always be appended to the
end.
Description
p1 = xsnn, receive signal level in dBm.
-ee
p2 = xm.m .
-ee
p3 = xm.m .
-ee
p4 = tttt_xm.m .
p5 = xnn.n, E /N in dB.
b 0
p6 = nn%, buffer fill status.
Remote Control Operation
B–21